Re: [PATCH v4 2/4] writeback: support retrieving per group debug writeback stats of bdi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello
on 4/23/2024 8:44 AM, SeongJae Park wrote:
> Hi Kemeng,
> 
> On Tue, 23 Apr 2024 00:48:06 +0800 Kemeng Shi <shikemeng@xxxxxxxxxxxxxxx> wrote:
> 
>> Add /sys/kernel/debug/bdi/xxx/wb_stats to show per group writeback stats
>> of bdi.
>>
>> Following domain hierarchy is tested:
>>                 global domain (320G)
>>                 /                 \
>>         cgroup domain1(10G)     cgroup domain2(10G)
>>                 |                 |
>> bdi            wb1               wb2
>>
>> /* per wb writeback info of bdi is collected */
>> cat /sys/kernel/debug/bdi/252:16/wb_stats
>> WbCgIno:                    1
>> WbWriteback:                0 kB
>> WbReclaimable:              0 kB
>> WbDirtyThresh:              0 kB
>> WbDirtied:                  0 kB
>> WbWritten:                  0 kB
>> WbWriteBandwidth:      102400 kBps
>> b_dirty:                    0
>> b_io:                       0
>> b_more_io:                  0
>> b_dirty_time:               0
>> state:                      1
>> WbCgIno:                 4094
>> WbWriteback:            54432 kB
>> WbReclaimable:         766080 kB
>> WbDirtyThresh:        3094760 kB
>> WbDirtied:            1656480 kB
>> WbWritten:             837088 kB
>> WbWriteBandwidth:      132772 kBps
>> b_dirty:                    1
>> b_io:                       1
>> b_more_io:                  0
>> b_dirty_time:               0
>> state:                      7
>> WbCgIno:                 4135
>> WbWriteback:            15232 kB
>> WbReclaimable:         786688 kB
>> WbDirtyThresh:        2909984 kB
>> WbDirtied:            1482656 kB
>> WbWritten:             681408 kB
>> WbWriteBandwidth:      124848 kBps
>> b_dirty:                    0
>> b_io:                       1
>> b_more_io:                  0
>> b_dirty_time:               0
>> state:                      7
>>
>> Signed-off-by: Kemeng Shi <shikemeng@xxxxxxxxxxxxxxx>
>> ---
>>  include/linux/writeback.h |  1 +
>>  mm/backing-dev.c          | 78 ++++++++++++++++++++++++++++++++++++++-
>>  mm/page-writeback.c       | 19 ++++++++++
>>  3 files changed, 96 insertions(+), 2 deletions(-)
>>
>> diff --git a/include/linux/writeback.h b/include/linux/writeback.h
>> index 9845cb62e40b..112d806ddbe4 100644
>> --- a/include/linux/writeback.h
>> +++ b/include/linux/writeback.h
>> @@ -355,6 +355,7 @@ int dirtytime_interval_handler(struct ctl_table *table, int write,
>>  
>>  void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty);
>>  unsigned long wb_calc_thresh(struct bdi_writeback *wb, unsigned long thresh);
>> +unsigned long cgwb_calc_thresh(struct bdi_writeback *wb);
>>  
>>  void wb_update_bandwidth(struct bdi_writeback *wb);
>>  
>> diff --git a/mm/backing-dev.c b/mm/backing-dev.c
>> index 089146feb830..6ecd11bdce6e 100644
>> --- a/mm/backing-dev.c
>> +++ b/mm/backing-dev.c
>> @@ -155,19 +155,93 @@ static int bdi_debug_stats_show(struct seq_file *m, void *v)
>>  }
>>  DEFINE_SHOW_ATTRIBUTE(bdi_debug_stats);
>>  
>> +static void wb_stats_show(struct seq_file *m, struct bdi_writeback *wb,
>> +			  struct wb_stats *stats)
>> +{
>> +
>> +	seq_printf(m,
>> +		   "WbCgIno:           %10lu\n"
>> +		   "WbWriteback:       %10lu kB\n"
>> +		   "WbReclaimable:     %10lu kB\n"
>> +		   "WbDirtyThresh:     %10lu kB\n"
>> +		   "WbDirtied:         %10lu kB\n"
>> +		   "WbWritten:         %10lu kB\n"
>> +		   "WbWriteBandwidth:  %10lu kBps\n"
>> +		   "b_dirty:           %10lu\n"
>> +		   "b_io:              %10lu\n"
>> +		   "b_more_io:         %10lu\n"
>> +		   "b_dirty_time:      %10lu\n"
>> +		   "state:             %10lx\n\n",
>> +		   cgroup_ino(wb->memcg_css->cgroup),
> 
> I'm getting below kunit build failure from the latest mm-unstable tree, and
> 'git bisect' points this patch.
> 
>     ERROR:root:.../linux/mm/backing-dev.c: In function ‘wb_stats_show’:
>     .../linux/mm/backing-dev.c:175:20: error: implicit declaration of function ‘cgroup_ino’; did you mean ‘cgroup_init’? [-Werror=implicit-function-declaration]
>       175 |                    cgroup_ino(wb->memcg_css->cgroup),
>           |                    ^~~~~~~~~~
>           |                    cgroup_init
>     .../linux/mm/backing-dev.c:175:33: error: ‘struct bdi_writeback’ has no member named ‘memcg_css’
>       175 |                    cgroup_ino(wb->memcg_css->cgroup),
>           |                                 ^~
> 
> The kunit build config is not having CONFIG_CGROUPS.  I guess we need to check
> the case?  I confirmed below dumb change is fixing the issue, but I guess it
> could be cleaner.  May I ask your opinion?
Thanks for report the issue. As discussed before, we try to keep the same output
whether CGROUP is enable or not. So we'd better show cgroup number 0 for bdi->wb
instead remove cgroup number from output.
> 
> --- a/mm/backing-dev.c
> +++ b/mm/backing-dev.c
> @@ -160,7 +160,9 @@ static void wb_stats_show(struct seq_file *m, struct bdi_writeback *wb,
>  {
> 
>         seq_printf(m,
> +#ifdef CONFIG_CGROUPS
>                    "WbCgIno:           %10lu\n"
> +#endif
>                    "WbWriteback:       %10lu kB\n"
>                    "WbReclaimable:     %10lu kB\n"
>                    "WbDirtyThresh:     %10lu kB\n"
> @@ -172,7 +174,9 @@ static void wb_stats_show(struct seq_file *m, struct bdi_writeback *wb,
>                    "b_more_io:         %10lu\n"
>                    "b_dirty_time:      %10lu\n"
>                    "state:             %10lx\n\n",
> +#ifdef CONFIG_CGROUPS
>                    cgroup_ino(wb->memcg_css->cgroup),
> +#endif
>                    K(stats->nr_writeback),
>                    K(stats->nr_reclaimable),
>                    K(stats->wb_thresh),
> 
> 
>> +		   K(stats->nr_writeback),
>> +		   K(stats->nr_reclaimable),
>> +		   K(stats->wb_thresh),
>> +		   K(stats->nr_dirtied),
>> +		   K(stats->nr_written),
>> +		   K(wb->avg_write_bandwidth),
>> +		   stats->nr_dirty,
>> +		   stats->nr_io,
>> +		   stats->nr_more_io,
>> +		   stats->nr_dirty_time,
>> +		   wb->state);
>> +}
>> +
>> +static int cgwb_debug_stats_show(struct seq_file *m, void *v)
>> +{
>> +	struct backing_dev_info *bdi = m->private;
>> +	unsigned long background_thresh;
>> +	unsigned long dirty_thresh;
>> +	struct bdi_writeback *wb;
>> +	struct wb_stats stats;
> 
> Kunit build also shows below warning:
> 
>     .../linux/mm/backing-dev.c: In function ‘cgwb_debug_stats_show’:
>     .../linux/mm/backing-dev.c:195:25: warning: unused variable ‘stats’ [-Wunused-variable]
>       195 |         struct wb_stats stats;
>           |                         ^~~~~
> 
> I guess above line can simply removed?
Yes, this could be simply removed.

I'd submit a new series to fix this very soon.

Thanks.
> 
>> +
>> +	global_dirty_limits(&background_thresh, &dirty_thresh);
>> +
>> +	rcu_read_lock();
>> +	list_for_each_entry_rcu(wb, &bdi->wb_list, bdi_node) {
>> +		struct wb_stats stats = { .dirty_thresh = dirty_thresh };
>> +
>> +		if (!wb_tryget(wb))
>> +			continue;
>> +
>> +		collect_wb_stats(&stats, wb);
>> +
>> +		/*
>> +		 * Calculate thresh of wb in writeback cgroup which is min of
>> +		 * thresh in global domain and thresh in cgroup domain. Drop
>> +		 * rcu lock because cgwb_calc_thresh may sleep in
>> +		 * cgroup_rstat_flush. We can do so here because we have a ref.
>> +		 */
>> +		if (mem_cgroup_wb_domain(wb)) {
>> +			rcu_read_unlock();
>> +			stats.wb_thresh = min(stats.wb_thresh, cgwb_calc_thresh(wb));
>> +			rcu_read_lock();
>> +		}
>> +
>> +		wb_stats_show(m, wb, &stats);
>> +
>> +		wb_put(wb);
>> +	}
>> +	rcu_read_unlock();
>> +
>> +	return 0;
>> +}
> 
> 
> Thanks,
> SJ
> 
> [...]
> 





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux