Re: [PATCH net-next v2 05/15] mm: page_frag: use initial zero offset for page_frag_alloc_align()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2024-04-15 at 21:19 +0800, Yunsheng Lin wrote:
> We are above to use page_frag_alloc_*() API to not just
> allocate memory for skb->data, but also use them to do
> the memory allocation for skb frag too. Currently the
> implementation of page_frag in mm subsystem is running
> the offset as a countdown rather than count-up value,
> there may have several advantages to that as mentioned
> in [1], but it may have some disadvantages, for example,
> it may disable skb frag coaleasing and more correct cache
> prefetching
> 
> We have a trade-off to make in order to have a unified
> implementation and API for page_frag, so use a initial zero
> offset in this patch, and the following patch will try to
> make some optimization to aovid the disadvantages as much
> as possible.
> 
> 1. https://lore.kernel.org/all/f4abe71b3439b39d17a6fb2d410180f367cadf5c.camel@xxxxxxxxx/
> 
> CC: Alexander Duyck <alexander.duyck@xxxxxxxxx>
> Signed-off-by: Yunsheng Lin <linyunsheng@xxxxxxxxxx>
> ---
>  mm/page_frag_cache.c | 31 ++++++++++++++-----------------
>  1 file changed, 14 insertions(+), 17 deletions(-)
> 
> diff --git a/mm/page_frag_cache.c b/mm/page_frag_cache.c
> index 64993b5d1243..dc864ee09536 100644
> --- a/mm/page_frag_cache.c
> +++ b/mm/page_frag_cache.c
> @@ -65,9 +65,8 @@ void *__page_frag_alloc_align(struct page_frag_cache *nc,
>  			      unsigned int fragsz, gfp_t gfp_mask,
>  			      unsigned int align_mask)
>  {
> -	unsigned int size = PAGE_SIZE;
> +	unsigned int size, offset;
>  	struct page *page;
> -	int offset;
>  
>  	if (unlikely(!nc->va)) {
>  refill:
> @@ -75,10 +74,6 @@ void *__page_frag_alloc_align(struct page_frag_cache *nc,
>  		if (!page)
>  			return NULL;
>  
> -#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE)
> -		/* if size can vary use size else just use PAGE_SIZE */
> -		size = nc->size;
> -#endif
>  		/* Even if we own the page, we do not use atomic_set().
>  		 * This would break get_page_unless_zero() users.
>  		 */
> @@ -87,11 +82,18 @@ void *__page_frag_alloc_align(struct page_frag_cache *nc,
>  		/* reset page count bias and offset to start of new frag */
>  		nc->pfmemalloc = page_is_pfmemalloc(page);
>  		nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1;
> -		nc->offset = size;
> +		nc->offset = 0;
>  	}
>  
> -	offset = nc->offset - fragsz;
> -	if (unlikely(offset < 0)) {
> +#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE)
> +	/* if size can vary use size else just use PAGE_SIZE */
> +	size = nc->size;
> +#else
> +	size = PAGE_SIZE;
> +#endif
> +
> +	offset = ALIGN(nc->offset, -align_mask);

I am not sure if using -align_mask here with the ALIGN macro is really
to your benefit. I would be curious what the compiler is generating.

Again, I think you would be much better off with:
	offset = __ALIGN_KERNEL_MASK(nc->offset, ~align_mask);

That will save you a number of conversions as the use of the ALIGN
macro gives you:
	offset = (nc->offset + (-align_mask - 1)) & ~(-align_mask -
1);

whereas what I am suggesting gives you:
	offset = (nc->offset + ~align_mask) & ~(~align_mask));

My main concern is that I am not sure the compiler will optimize around
the combination of bit operations and arithmetic operations. It seems
much cleaner to me to stick to the bitwise operations for the alignment
than to force this into the vhost approach which requires a power of 2
aligned mask.

Also the old code was aligning on the combination of offset AND fragsz.
This new logic is aligning on offset only. Do we run the risk of
overwriting blocks of neighbouring fragments if two users of
napi_alloc_frag_align end up passing arguments that have different
alignment values?

> +	if (unlikely(offset + fragsz > size)) {
>  		page = virt_to_page(nc->va);
>  
>  		if (!page_ref_sub_and_test(page, nc->pagecnt_bias))
> @@ -102,17 +104,13 @@ void *__page_frag_alloc_align(struct page_frag_cache *nc,
>  			goto refill;
>  		}
>  
> -#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE)
> -		/* if size can vary use size else just use PAGE_SIZE */
> -		size = nc->size;
> -#endif
>  		/* OK, page count is 0, we can safely set it */
>  		set_page_count(page, PAGE_FRAG_CACHE_MAX_SIZE + 1);
>  
>  		/* reset page count bias and offset to start of new frag */
>  		nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1;
> -		offset = size - fragsz;
> -		if (unlikely(offset < 0)) {
> +		offset = 0;
> +		if (unlikely(fragsz > size)) {

This check can probably be moved now. It was placed here to optimize
things as a check of offset < 0 was a single jump command based on the
signed flag being set as a result of the offset calculation.

It might make sense to pull this out of here and instead place it at
the start of this block after the initial check with offset + fragsz >
size since that would shorten the need to carry the size variable.

>  			/*
>  			 * The caller is trying to allocate a fragment
>  			 * with fragsz > PAGE_SIZE but the cache isn't big
> @@ -127,8 +125,7 @@ void *__page_frag_alloc_align(struct page_frag_cache *nc,
>  	}
>  
>  	nc->pagecnt_bias--;
> -	offset &= align_mask;
> -	nc->offset = offset;
> +	nc->offset = offset + fragsz;
>  
>  	return nc->va + offset;
>  }






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux