Re: [PATCH v2 3/6] writeback: support retrieving per group debug writeback stats of bdi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 03, 2024 at 04:49:42PM +0800, Kemeng Shi wrote:
> 
> 
> on 3/29/2024 9:10 PM, Brian Foster wrote:
> > On Wed, Mar 27, 2024 at 11:57:48PM +0800, Kemeng Shi wrote:
> >> Add /sys/kernel/debug/bdi/xxx/wb_stats to show per group writeback stats
> >> of bdi.
> >>
> > 
> > Hi Kemeng,
> Hello Brian,
> > 
> > Just a few random thoughts/comments..
> > 
> >> Following domain hierarchy is tested:
> >>                 global domain (320G)
> >>                 /                 \
> >>         cgroup domain1(10G)     cgroup domain2(10G)
> >>                 |                 |
> >> bdi            wb1               wb2
> >>
> >> /* per wb writeback info of bdi is collected */
> >> cat /sys/kernel/debug/bdi/252:16/wb_stats
> >> WbCgIno:                    1
> >> WbWriteback:                0 kB
> >> WbReclaimable:              0 kB
> >> WbDirtyThresh:              0 kB
> >> WbDirtied:                  0 kB
> >> WbWritten:                  0 kB
> >> WbWriteBandwidth:      102400 kBps
> >> b_dirty:                    0
> >> b_io:                       0
> >> b_more_io:                  0
> >> b_dirty_time:               0
> >> state:                      1
> > 
> > Maybe some whitespace or something between entries would improve
> > readability?
> Sure, I will add a whitespace in next version.
> > 
> >> WbCgIno:                 4094
> >> WbWriteback:            54432 kB
> >> WbReclaimable:         766080 kB
> >> WbDirtyThresh:        3094760 kB
> >> WbDirtied:            1656480 kB
> >> WbWritten:             837088 kB
> >> WbWriteBandwidth:      132772 kBps
> >> b_dirty:                    1
> >> b_io:                       1
> >> b_more_io:                  0
> >> b_dirty_time:               0
> >> state:                      7
> >> WbCgIno:                 4135
> >> WbWriteback:            15232 kB
> >> WbReclaimable:         786688 kB
> >> WbDirtyThresh:        2909984 kB
> >> WbDirtied:            1482656 kB
> >> WbWritten:             681408 kB
> >> WbWriteBandwidth:      124848 kBps
> >> b_dirty:                    0
> >> b_io:                       1
> >> b_more_io:                  0
> >> b_dirty_time:               0
> >> state:                      7
> >>
> >> Signed-off-by: Kemeng Shi <shikemeng@xxxxxxxxxxxxxxx>
> >> ---
> >>  include/linux/writeback.h |  1 +
> >>  mm/backing-dev.c          | 88 +++++++++++++++++++++++++++++++++++++++
> >>  mm/page-writeback.c       | 19 +++++++++
> >>  3 files changed, 108 insertions(+)
> >>
> > ...
> >> diff --git a/mm/backing-dev.c b/mm/backing-dev.c
> >> index 8daf950e6855..e3953db7d88d 100644
> >> --- a/mm/backing-dev.c
> >> +++ b/mm/backing-dev.c
> >> @@ -103,6 +103,91 @@ static void collect_wb_stats(struct wb_stats *stats,
> >>  }
> >>  
> >>  #ifdef CONFIG_CGROUP_WRITEBACK
> > ...
> >> +static int cgwb_debug_stats_show(struct seq_file *m, void *v)
> >> +{
> >> +	struct backing_dev_info *bdi;
> >> +	unsigned long background_thresh;
> >> +	unsigned long dirty_thresh;
> >> +	struct bdi_writeback *wb;
> >> +	struct wb_stats stats;
> >> +
> >> +	rcu_read_lock();
> >> +	bdi = lookup_bdi(m);
> >> +	if (!bdi) {
> >> +		rcu_read_unlock();
> >> +		return -EEXIST;
> >> +	}
> >> +
> >> +	global_dirty_limits(&background_thresh, &dirty_thresh);
> >> +
> >> +	list_for_each_entry_rcu(wb, &bdi->wb_list, bdi_node) {
> >> +		memset(&stats, 0, sizeof(stats));
> >> +		stats.dirty_thresh = dirty_thresh;
> > 
> > If you did something like the following here, wouldn't that also zero
> > the rest of the structure?
> > 
> > 		struct wb_stats stats = { .dirty_thresh = dirty_thresh };
> > 
> Suer, will do it in next version.
> >> +		collect_wb_stats(&stats, wb);
> >> +
> > 
> > Also, similar question as before on whether you'd want to check
> > WB_registered or something here..
> Still prefer to keep full debug info and user could filter out on
> demand.

Ok. I was more wondering if that was needed for correctness. If not,
then that seems fair enough to me.

> > 
> >> +		if (mem_cgroup_wb_domain(wb) == NULL) {
> >> +			wb_stats_show(m, wb, &stats);
> >> +			continue;
> >> +		}
> > 
> > Can you explain what this logic is about? Is the cgwb_calc_thresh()
> > thing not needed in this case? A comment might help for those less
> > familiar with the implementation details.
> If mem_cgroup_wb_domain(wb) is NULL, then it's bdi->wb, otherwise,
> it's wb in cgroup. For bdi->wb, there is no need to do wb_tryget
> and cgwb_calc_thresh. Will add some comment in next version.
> > 
> > BTW, I'm also wondering if something like the following is correct
> > and/or roughly equivalent:
> > 	
> > 	list_for_each_*(wb, ...) {
> > 		struct wb_stats stats = ...;
> > 
> > 		if (!wb_tryget(wb))
> > 			continue;
> > 
> > 		collect_wb_stats(&stats, wb);
> > 
> > 		/*
> > 		 * Extra wb_thresh magic. Drop rcu lock because ... . We
> > 		 * can do so here because we have a ref.
> > 		 */
> > 		if (mem_cgroup_wb_domain(wb)) {
> > 			rcu_read_unlock();
> > 			stats.wb_thresh = min(stats.wb_thresh, cgwb_calc_thresh(wb));
> > 			rcu_read_lock();
> > 		}
> > 
> > 		wb_stats_show(m, wb, &stats)
> > 		wb_put(wb);
> > 	}
> It's correct as wb_tryget to bdi->wb has no harm. I have considered
> to do it in this way, I change my mind to do it in new way for
> two reason:
> 1. Put code handling wb in cgroup more tight which could be easier
> to maintain.
> 2. Rmove extra wb_tryget/wb_put for wb in bdi.
> Would this make sense to you?

Ok, well assuming it is correct the above logic is a bit more simple and
readable to me. I think you'd just need to fill in the comment around
the wb_thresh thing rather than i.e. having to explain we don't need to
ref bdi->wb even though it doesn't seem to matter.

I kind of feel the same on the wb_stats file thing below just because it
seems more consistent and available if wb_stats eventually grows more
wb-specific data.

That said, this is subjective and not hugely important so I don't insist
on either point. Maybe wait a bit and see if Jan or Tejun or somebody
has any thoughts..? If nobody else expresses explicit preference then
I'm good with it either way.

Brian

> > 
> >> +
> >> +		/*
> >> +		 * cgwb_release will destroy wb->memcg_completions which
> >> +		 * will be ued in cgwb_calc_thresh. Use wb_tryget to prevent
> >> +		 * memcg_completions destruction from cgwb_release.
> >> +		 */
> >> +		if (!wb_tryget(wb))
> >> +			continue;
> >> +
> >> +		rcu_read_unlock();
> >> +		/* cgwb_calc_thresh may sleep in cgroup_rstat_flush */
> >> +		stats.wb_thresh = min(stats.wb_thresh, cgwb_calc_thresh(wb));
> >> +		wb_stats_show(m, wb, &stats);
> >> +		rcu_read_lock();
> >> +		wb_put(wb);
> >> +	}
> >> +	rcu_read_unlock();
> >> +
> >> +	return 0;
> >> +}
> >> +DEFINE_SHOW_ATTRIBUTE(cgwb_debug_stats);
> >> +
> >> +static void cgwb_debug_register(struct backing_dev_info *bdi)
> >> +{
> >> +	debugfs_create_file("wb_stats", 0444, bdi->debug_dir, bdi,
> >> +			    &cgwb_debug_stats_fops);
> >> +}
> >> +
> >>  static void bdi_collect_stats(struct backing_dev_info *bdi,
> >>  			      struct wb_stats *stats)
> >>  {
> >> @@ -117,6 +202,8 @@ static void bdi_collect_stats(struct backing_dev_info *bdi,
> >>  {
> >>  	collect_wb_stats(stats, &bdi->wb);
> >>  }
> >> +
> >> +static inline void cgwb_debug_register(struct backing_dev_info *bdi) { }
> > 
> > Could we just create the wb_stats file regardless of whether cgwb is
> > enabled? Obviously theres only one wb in the !CGWB case and it's
> > somewhat duplicative with the bdi stats file, but that seems harmless if
> > the same code can be reused..? Maybe there's also a small argument for
> > dropping the state info from the bdi stats file and moving it to
> > wb_stats.In backing-dev.c, there are a lot "#ifdef CGWB .. #else .. #endif" to
> avoid unneed extra cost when CGWB is not enabled.
> I think it's better to avoid extra cost from wb_stats when CGWB is not
> enabled. For now, we only save cpu cost to create and destroy wb_stats
> and save memory cost to record debugfs file, we could save more in
> future when wb_stats records more debug info.
> Move state info from bdi stats to wb_stats make senses to me. The only
> concern would be compatibility problem. I will add a new patch to this
> to make this more noticeable and easier to revert.
> Thanks a lot for review!
> 
> Kemeng
> > 
> > Brian
> > 
> >>  #endif
> >>  
> >>  static int bdi_debug_stats_show(struct seq_file *m, void *v)
> >> @@ -182,6 +269,7 @@ static void bdi_debug_register(struct backing_dev_info *bdi, const char *name)
> >>  
> >>  	debugfs_create_file("stats", 0444, bdi->debug_dir, bdi,
> >>  			    &bdi_debug_stats_fops);
> >> +	cgwb_debug_register(bdi);
> >>  }
> >>  
> >>  static void bdi_debug_unregister(struct backing_dev_info *bdi)
> >> diff --git a/mm/page-writeback.c b/mm/page-writeback.c
> >> index 0e20467367fe..3724c7525316 100644
> >> --- a/mm/page-writeback.c
> >> +++ b/mm/page-writeback.c
> >> @@ -893,6 +893,25 @@ unsigned long wb_calc_thresh(struct bdi_writeback *wb, unsigned long thresh)
> >>  	return __wb_calc_thresh(&gdtc, thresh);
> >>  }
> >>  
> >> +unsigned long cgwb_calc_thresh(struct bdi_writeback *wb)
> >> +{
> >> +	struct dirty_throttle_control gdtc = { GDTC_INIT_NO_WB };
> >> +	struct dirty_throttle_control mdtc = { MDTC_INIT(wb, &gdtc) };
> >> +	unsigned long filepages, headroom, writeback;
> >> +
> >> +	gdtc.avail = global_dirtyable_memory();
> >> +	gdtc.dirty = global_node_page_state(NR_FILE_DIRTY) +
> >> +		     global_node_page_state(NR_WRITEBACK);
> >> +
> >> +	mem_cgroup_wb_stats(wb, &filepages, &headroom,
> >> +			    &mdtc.dirty, &writeback);
> >> +	mdtc.dirty += writeback;
> >> +	mdtc_calc_avail(&mdtc, filepages, headroom);
> >> +	domain_dirty_limits(&mdtc);
> >> +
> >> +	return __wb_calc_thresh(&mdtc, mdtc.thresh);
> >> +}
> >> +
> >>  /*
> >>   *                           setpoint - dirty 3
> >>   *        f(dirty) := 1.0 + (----------------)
> >> -- 
> >> 2.30.0
> >>
> > 
> > 
> 





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux