[PATCH v5] filemap: avoid unnecessary major faults in filemap_fault()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: ZhangPeng <zhangpeng362@xxxxxxxxxx>

The major fault occurred when using mlockall(MCL_CURRENT | MCL_FUTURE)
in application, which leading to an unexpected issue[1].

This caused by temporarily cleared PTE during a read+clear/modify/write
update of the PTE, eg, do_numa_page()/change_pte_range().

For the data segment of the user-mode program, the global variable area
is a private mapping. After the pagecache is loaded, the private anonymous
page is generated after the COW is triggered. Mlockall can lock COW pages
(anonymous pages), but the original file pages cannot be locked and may
be reclaimed. If the global variable (private anon page) is accessed when
vmf->pte is zeroed in numa fault, a file page fault will be triggered.
At this time, the original private file page may have been reclaimed.
If the page cache is not available at this time, a major fault will be
triggered and the file will be read, causing additional overhead.

This issue affects our traffic analysis service. The inbound traffic is
heavy. If a major fault occurs, the I/O schedule is triggered and the
original I/O is suspended. Generally, the I/O schedule is 0.7 ms. If
other applications are operating disks, the system needs to wait for
more than 10 ms. However, the inbound traffic is heavy and the NIC buffer
is small. As a result, packet loss occurs. But the traffic analysis service
can't tolerate packet loss.

Fix this by holding PTL and rechecking the PTE in filemap_fault() before
triggering a major fault. We do this check only if vma is VM_LOCKED to
reduce the performance impact in common scenarios.

In our product environment, there were 7 major faults every 12 hours.
After the patch is applied, no major fault have been triggered.

Testing file page read and write page fault performance in ext4 and
ramdisk using will-it-scale[2] on a x86 physical machine. The data is
the average change compared with the mainline after the patch is applied.
The test results are within the range of fluctuation. We do this check
only if vma is VM_LOCKED, therefore, no performance regressions is caused
for most common cases.

The test results are as follows:
                          processes processes_idle  threads threads_idle
ext4    private file write:  0.22%    0.26%           1.21%  -0.15%
ext4    private file  read:  0.03%    1.00%           1.39%   0.34%
ext4    shared  file write: -0.50%   -0.02%          -0.14%  -0.02%
ramdisk private file write:  0.07%    0.02%           0.53%   0.04%
ramdisk private file  read:  0.01%    1.60%          -0.32%  -0.02%

[1] https://lore.kernel.org/linux-mm/9e62fd9a-bee0-52bf-50a7-498fa17434ee@xxxxxxxxxx/
[2] https://github.com/antonblanchard/will-it-scale/

Suggested-by: "Huang, Ying" <ying.huang@xxxxxxxxx>
Suggested-by: David Hildenbrand <david@xxxxxxxxxx>
Signed-off-by: ZhangPeng <zhangpeng362@xxxxxxxxxx>
Signed-off-by: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx>
Reviewed-by: "Huang, Ying" <ying.huang@xxxxxxxxx>
Reviewed-by: David Hildenbrand <david@xxxxxxxxxx>
---
v4->v5:
- Replace pte_offset_map with pte_offset_map_nolock per David Hildenbrand
- Collect Reviewed-bys

v3->v4:
- Update the performance data and commit message
- Check PTE without lock firstly per Huang, Ying
- Update comments for recheck function per David Hildenbrand
- Simply return 0 to make it easier to read per David Hildenbrand
- Check !FAULT_FLAG_ORIG_PTE_VALID instead of pmd_none()

v2->v3:
- Do this check only if vma is VM_LOCKED per David Hildenbrand
- Hold PTL and recheck the PTE
- Place the recheck code in a new function filemap_fault_recheck_pte()

v1->v2:
- Add more test results per Huang, Ying
- Add more comments before check PTE per Huang, Ying, David Hildenbrand
  and Yin Fengwei
- Change pte_offset_map_nolock to pte_offset_map as the PTL won't
  be used

RFC->v1:
- Add error handling when ptep == NULL per Huang, Ying and Matthew
  Wilcox
- Check the PTE without acquiring PTL in filemap_fault(), suggested by
  Huang, Ying and Yin Fengwei
- Add pmd_none() check before PTE map
- Update commit message and add performance test information

 mm/filemap.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/mm/filemap.c b/mm/filemap.c
index b4858d89f1b1..222adac7c9c5 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -3181,6 +3181,49 @@ static struct file *do_async_mmap_readahead(struct vm_fault *vmf,
 	return fpin;
 }
 
+static vm_fault_t filemap_fault_recheck_pte_none(struct vm_fault *vmf)
+{
+	struct vm_area_struct *vma = vmf->vma;
+	vm_fault_t ret = 0;
+	pte_t *ptep;
+
+	/*
+	 * We might have COW'ed a pagecache folio and might now have an mlocked
+	 * anon folio mapped. The original pagecache folio is not mlocked and
+	 * might have been evicted. During a read+clear/modify/write update of
+	 * the PTE, such as done in do_numa_page()/change_pte_range(), we
+	 * temporarily clear the PTE under PT lock and might detect it here as
+	 * "none" when not holding the PT lock.
+	 *
+	 * Not rechecking the PTE under PT lock could result in an unexpected
+	 * major fault in an mlock'ed region. Recheck only for this special
+	 * scenario while holding the PT lock, to not degrade non-mlocked
+	 * scenarios. Recheck the PTE without PT lock firstly, thereby reducing
+	 * the number of times we hold PT lock.
+	 */
+	if (!(vma->vm_flags & VM_LOCKED))
+		return 0;
+
+	if (!(vmf->flags & FAULT_FLAG_ORIG_PTE_VALID))
+		return 0;
+
+	ptep = pte_offset_map_nolock(vma->vm_mm, vmf->pmd, vmf->address,
+				     &vmf->ptl);
+	if (unlikely(!ptep))
+		return VM_FAULT_NOPAGE;
+
+	if (unlikely(!pte_none(ptep_get_lockless(ptep)))) {
+		ret = VM_FAULT_NOPAGE;
+	} else {
+		spin_lock(vmf->ptl);
+		if (unlikely(!pte_none(ptep_get(ptep))))
+			ret = VM_FAULT_NOPAGE;
+		spin_unlock(vmf->ptl);
+	}
+	pte_unmap(ptep);
+	return ret;
+}
+
 /**
  * filemap_fault - read in file data for page fault handling
  * @vmf:	struct vm_fault containing details of the fault
@@ -3236,6 +3279,10 @@ vm_fault_t filemap_fault(struct vm_fault *vmf)
 			mapping_locked = true;
 		}
 	} else {
+		ret = filemap_fault_recheck_pte_none(vmf);
+		if (unlikely(ret))
+			return ret;
+
 		/* No page in the page cache at all */
 		count_vm_event(PGMAJFAULT);
 		count_memcg_event_mm(vmf->vma->vm_mm, PGMAJFAULT);
-- 
2.25.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux