Re: [PATCH] mm: export folio_pte_batch as a couple of modules might need it

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27.02.24 10:27, Barry Song wrote:
On Tue, Feb 27, 2024 at 10:14 PM David Hildenbrand <david@xxxxxxxxxx> wrote:

On 27.02.24 10:07, Ryan Roberts wrote:
On 27/02/2024 02:40, Barry Song wrote:
From: Barry Song <v-songbaohua@xxxxxxxx>

madvise and some others might need folio_pte_batch to check if a range
of PTEs are completely mapped to a large folio with contiguous physcial
addresses. Let's export it for others to use.

Cc: Lance Yang <ioworker0@xxxxxxxxx>
Cc: Ryan Roberts <ryan.roberts@xxxxxxx>
Cc: David Hildenbrand <david@xxxxxxxxxx>
Cc: Yin Fengwei <fengwei.yin@xxxxxxxxx>
Signed-off-by: Barry Song <v-songbaohua@xxxxxxxx>
---
   -v1:
   at least two jobs madv_free and madv_pageout depend on it. To avoid
   conflicts and dependencies, after discussing with Lance, we prefer
   this one can land earlier.

I think this will also ultimately be useful for mprotect too, though I haven't
looked at it properly yet.


Yes, I think we briefly discussed that.


   mm/internal.h | 13 +++++++++++++
   mm/memory.c   | 11 +----------
   2 files changed, 14 insertions(+), 10 deletions(-)

diff --git a/mm/internal.h b/mm/internal.h
index 13b59d384845..8e2bc304f671 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -83,6 +83,19 @@ static inline void *folio_raw_mapping(struct folio *folio)
      return (void *)(mapping & ~PAGE_MAPPING_FLAGS);
   }

+/* Flags for folio_pte_batch(). */
+typedef int __bitwise fpb_t;
+
+/* Compare PTEs after pte_mkclean(), ignoring the dirty bit. */
+#define FPB_IGNORE_DIRTY            ((__force fpb_t)BIT(0))
+
+/* Compare PTEs after pte_clear_soft_dirty(), ignoring the soft-dirty bit. */
+#define FPB_IGNORE_SOFT_DIRTY               ((__force fpb_t)BIT(1))
+
+extern int folio_pte_batch(struct folio *folio, unsigned long addr,
+            pte_t *start_ptep, pte_t pte, int max_nr, fpb_t flags,
+            bool *any_writable);
+
   void __acct_reclaim_writeback(pg_data_t *pgdat, struct folio *folio,
                                              int nr_throttled);
   static inline void acct_reclaim_writeback(struct folio *folio)
diff --git a/mm/memory.c b/mm/memory.c
index 1c45b6a42a1b..319b3be05e75 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -953,15 +953,6 @@ static __always_inline void __copy_present_ptes(struct vm_area_struct *dst_vma,
      set_ptes(dst_vma->vm_mm, addr, dst_pte, pte, nr);
   }

-/* Flags for folio_pte_batch(). */
-typedef int __bitwise fpb_t;
-
-/* Compare PTEs after pte_mkclean(), ignoring the dirty bit. */
-#define FPB_IGNORE_DIRTY            ((__force fpb_t)BIT(0))
-
-/* Compare PTEs after pte_clear_soft_dirty(), ignoring the soft-dirty bit. */
-#define FPB_IGNORE_SOFT_DIRTY               ((__force fpb_t)BIT(1))
-
   static inline pte_t __pte_batch_clear_ignored(pte_t pte, fpb_t flags)
   {
      if (flags & FPB_IGNORE_DIRTY)
@@ -982,7 +973,7 @@ static inline pte_t __pte_batch_clear_ignored(pte_t pte, fpb_t flags)
    * If "any_writable" is set, it will indicate if any other PTE besides the
    * first (given) PTE is writable.
    */

David was talking in Lance's patch thread, about improving the docs for this
function now that its exported. Might be worth syncing on that.

Here is my take:

Signed-off-by: David Hildenbrand <david@xxxxxxxxxx>
---
   mm/memory.c | 22 ++++++++++++++++++----
   1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/mm/memory.c b/mm/memory.c
index d0b855a1837a8..098356b8805ae 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -971,16 +971,28 @@ static inline pte_t __pte_batch_clear_ignored(pte_t pte, fpb_t flags)
         return pte_wrprotect(pte_mkold(pte));
   }

-/*
+/**
+ * folio_pte_batch - detect a PTE batch for a large folio
+ * @folio: The large folio to detect a PTE batch for.
+ * @addr: The user virtual address the first page is mapped at.
+ * @start_ptep: Page table pointer for the first entry.
+ * @pte: Page table entry for the first page.
+ * @max_nr: The maximum number of table entries to consider.
+ * @flags: Flags to modify the PTE batch semantics.
+ * @any_writable: Optional pointer to indicate whether any entry except the
+ *               first one is writable.
+ *
    * Detect a PTE batch: consecutive (present) PTEs that map consecutive
- * pages of the same folio.
+ * pages of the same large folio.
    *
    * All PTEs inside a PTE batch have the same PTE bits set, excluding the PFN,
    * the accessed bit, writable bit, dirty bit (with FPB_IGNORE_DIRTY) and
    * soft-dirty bit (with FPB_IGNORE_SOFT_DIRTY).
    *
- * If "any_writable" is set, it will indicate if any other PTE besides the
- * first (given) PTE is writable.
+ * start_ptep must map any page of the folio. max_nr must be at least one and
+ * must be limited by the caller so scanning cannot exceed a single page table.
+ *
+ * Return: the number of table entries in the batch.
    */
   static inline int folio_pte_batch(struct folio *folio, unsigned long addr,
                 pte_t *start_ptep, pte_t pte, int max_nr, fpb_t flags,
@@ -996,6 +1008,8 @@ static inline int folio_pte_batch(struct folio *folio, unsigned long addr,
                 *any_writable = false;

         VM_WARN_ON_FOLIO(!pte_present(pte), folio);
+       VM_WARN_ON_FOLIO(!folio_test_large(folio) || max_nr < 1, folio);
+       VM_WARN_ON_FOLIO(page_folio(pfn_to_page(pte_pfn(pte))) != folio, folio);

         nr = pte_batch_hint(start_ptep, pte);
         expected_pte = __pte_batch_clear_ignored(pte_advance_pfn(pte, nr), flags);
--
2.43.2



-static inline int folio_pte_batch(struct folio *folio, unsigned long addr,
+int folio_pte_batch(struct folio *folio, unsigned long addr,

fork() is very performance sensitive. Is there a risk we are regressing
performance by making this out-of-line? Although its in the same compilation
unit so the compiler may well inline it anyway?

Easy to verify by looking at the generated asm I guess?

my aarch64-linux-gnu-gcc didn't inline it

I think on x86-64 it would inline it with "gcc (GCC) 13.2.1 20231205 (Red Hat 13.2.1-6)"


$ aarch64-linux-gnu-gcc --version
aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0
Copyright (C) 2021 Free Software Foundation, Inc.

$ nm -S -s vmlinux.a | grep  folio_pte_batch
0000000000003818 0000000000000204 T folio_pte_batch


As it's only used on the folio_test_large() "slower" paths, likely optimizing out the "writable" check (and possibly the flags) might not be that important.



Either way, perhaps we are better off making it inline in the header? That would
avoid needing to rerun David's micro-benchmarks for fork() and munmap().

actually tried this before trying extern, the problem is that we have to add
others into internal.h, for example __pte_batch_clear_ignored, which
seems not API. are we comfortable to move that one to internal.h too?

Yes, that shouldn't stop us.

--
Cheers,

David / dhildenb





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux