On 2024/2/7 10:21, Huang, Ying wrote:
Peng Zhang <zhangpeng362@xxxxxxxxxx> writes:
From: ZhangPeng <zhangpeng362@xxxxxxxxxx>
The major fault occurred when using mlockall(MCL_CURRENT | MCL_FUTURE)
in application, which leading to an unexpected performance issue[1].
This caused by temporarily cleared PTE during a read+clear/modify/write
update of the PTE, eg, do_numa_page()/change_pte_range().
For the data segment of the user-mode program, the global variable area
is a private mapping. After the pagecache is loaded, the private anonymous
page is generated after the COW is triggered. Mlockall can lock COW pages
(anonymous pages), but the original file pages cannot be locked and may
be reclaimed. If the global variable (private anon page) is accessed when
vmf->pte is zeroed in numa fault, a file page fault will be triggered.
At this time, the original private file page may have been reclaimed.
If the page cache is not available at this time, a major fault will be
triggered and the file will be read, causing additional overhead.
Fix this by rechecking the PTE without acquiring PTL in filemap_fault()
before triggering a major fault.
Testing file anonymous page read and write page fault performance in ext4
and ramdisk using will-it-scale[2] on a x86 physical machine. The data
is the average change compared with the mainline after the patch is
applied. The test results are within the range of fluctuation, and there
is no obvious difference. The test results are as follows:
You still claim that there's no difference in the test results. If so,
why do you implement the patch? IMHO, you need to prove your patch can
improve the performance in some cases.
I'm sorry that maybe I didn't express myself clearly.
The purpose of this patch is to fix the issue that major fault may still be triggered
with mlockall(), thereby improving a little performance. This patch is more of a bugfix
than a performance improvement patch.
This issue affects our traffic analysis service. The inbound traffic is heavy. If a major
fault occurs, the I/O schedule is triggered and the original I/O is suspended. Generally,
the I/O schedule is 0.7 ms. If other applications are operating disks, the system needs
to wait for more than 10 ms. However, the inbound traffic is heavy and the NIC buffer is
small. As a result, packet loss occurs. The traffic analysis service can't tolerate packet
loss.
To prevent packet loss, we use the mlockall() function to prevent I/O. It is unreasonable
that major faults will still be triggered after mlockall() is used.
In our service test environment, the baseline is 7 major faults/12 hours. After applied the
unlock patch, the probability of triggering the major fault is 1 major faults/12 hours. After
applied the lock patch, no major fault will be triggered. So only the locked patch can actually
solve our problem.
The test data provided is intended to prove that the patch does not have a major impact
on the performance of the page fault itself.
processes processes_idle threads threads_idle
ext4 private file write: -1.14% -0.08% -1.87% 0.13%
ext4 shared file write: 0.14% -0.53% 2.88% -0.77%
ext4 private file read: 0.03% -0.65% -0.51% -0.08%
tmpfs private file write: -0.34% -0.11% 0.20% 0.15%
tmpfs shared file write: 0.96% 0.10% 2.78% -0.34%
ramdisk private file write: -1.21% -0.21% -1.12% 0.11%
ramdisk private file read: 0.00% -0.68% -0.33% -0.02%
[1] https://lore.kernel.org/linux-mm/9e62fd9a-bee0-52bf-50a7-498fa17434ee@xxxxxxxxxx/
[2] https://github.com/antonblanchard/will-it-scale/
Suggested-by: "Huang, Ying" <ying.huang@xxxxxxxxx>
Suggested-by: Yin Fengwei <fengwei.yin@xxxxxxxxx>
Signed-off-by: ZhangPeng <zhangpeng362@xxxxxxxxxx>
Signed-off-by: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx>
---
v1->v2:
- Add more test results per Huang, Ying
- Add more comments before check PTE per Huang, Ying, David Hildenbrand
and Yin Fengwei
- Change pte_offset_map_nolock to pte_offset_map as the ptl lock won't
be used
RFC->v1:
- Add error handling when ptep == NULL per Huang, Ying and Matthew
Wilcox
- Check the PTE without acquiring PTL in filemap_fault(), suggested by
Huang, Ying and Yin Fengwei
- Add pmd_none() check before PTE map
- Update commit message and add performance test information
mm/filemap.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/mm/filemap.c b/mm/filemap.c
index 142864338ca4..a2c1a98bc771 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -3238,6 +3238,40 @@ vm_fault_t filemap_fault(struct vm_fault *vmf)
mapping_locked = true;
}
} else {
+ if (!pmd_none(*vmf->pmd)) {
+ pte_t *ptep;
+
+ ptep = pte_offset_map(vmf->pmd, vmf->address);
+ if (unlikely(!ptep))
+ return VM_FAULT_NOPAGE;
+ /*
+ * Recheck PTE as the PTE can be cleared temporarily
+ * during a read+clear/modify/write update of the PTE,
+ * eg, do_numa_page()/change_pte_range(). This will
+ * trigger a major fault, even if we use mlockall,
+ * which may affect performance.
+ * We don't hold PTL here as acquiring PTL hurts
+ * performance. So the check is still racy, but
+ * the race window seems small enough.
+ *
+ * If we lose the race during the check, the page_fault
+ * will be triggered. Butthe page table entry lock
+ * still make sure the correctness:
+ * - If the page cache is not reclaimed, the page_fault
+ * will work like the page fault was served already
+ * and bail out.
+ * - If the page cache is reclaimed, the major fault
+ * will be triggered, page cache is filled,
+ * page_fault also work like the page fault was
+ * served already and bail out.
+ */
IMHO, this is too long. It can be shorten to like,
If we lose the race, major fault may be triggered unnecessary. This
hurts performance but not functionality.
OK, I'll fix it in the next version.
+ if (unlikely(!pte_none(ptep_get_lockless(ptep))))
+ ret = VM_FAULT_NOPAGE;
+ pte_unmap(ptep);
+ if (unlikely(ret))
+ return ret;
+ }
+
/* No page in the page cache at all */
count_vm_event(PGMAJFAULT);
count_memcg_event_mm(vmf->vma->vm_mm, PGMAJFAULT);
--
Best Regards,
Huang, Ying
--
Best Regards,
Peng
