On 8/6/2022 3:22 AM, Mike Rapoport wrote:
Hi Vijay,
On Wed, Aug 03, 2022 at 04:27:33PM +0530, Vijayanand Jitta wrote:
On 5/9/2022 5:12 PM, Mike Rapoport wrote:
On Mon, May 09, 2022 at 04:37:30PM +0530, Faiyaz Mohammed wrote:
On 5/5/2022 10:24 PM, Mike Rapoport wrote:
On Thu, May 05, 2022 at 08:46:15PM +0530, Faiyaz Mohammed wrote:
On 4/12/2022 10:56 PM, Mike Rapoport wrote:
On Tue, Apr 12, 2022 at 12:39:32AM +0530, Faiyaz Mohammed wrote:
This 'commit 86588296acbf ("fdt: Properly handle "no-map" field in the
memory region")' is keeping the no-map regions in memblock.memory with
MEMBLOCK_NOMAP flag set to use no-map memory for EFI using memblock api's,
but during the initialization sparse_init mark all memblock.memory as
present using for_each_mem_pfn_range, which is creating the memmap for
no-map memblock regions. To avoid it skiping the memblock.memory regions
set with MEMBLOCK_NOMAP set and with this change we will be able to save
~11MB memory for ~612MB carve out.
The MEMBLOCK_NOMAP is very fragile and caused a lot of issues already. I
really don't like the idea if adding more implicit assumptions about how
NOMAP memory may or may not be used in a generic iterator function.
Sorry for delayed response.
Yes, it is possible that implicit assumption can create
misunderstanding. How about adding command line option and control the
no-map region in fdt.c driver, to decide whether to keep "no-map" region
with NOMAP flag or remove?. Something like below
I really don't like memblock_remove() for such cases.
Pretending there is a hole when there is an actual DRAM makes things really
hairy when it comes to memory map and page allocator initialization.
You wouldn't want to trade system stability and random memory corruptions
for 11M of "saved" memory.
Creating memory map for holes memory is adding 11MB overhead which is
huge on low memory target and same time 11MB memory saving is good enough
on low memory target.
Or we can have separate list of NOMAP like reserved?.
Any other suggestion to address this issue?.
Make your firmware to report the memory that Linux cannot use as a hole,
i.e. _not_ report it as memory.
Thanks, Mike for the comments.
Few concerns with this approach.
1) One concern is, even if firmware doesn't report these regions as
memory, we would need addresses for these to be part of device tree so
that the clients would be able to get these addresses. Otherwise there
is no way for client to know these addresses.
2) This would also add a dependency on firmware to be able to pass these
regions not as memory, though we know that these regions would be used
by the clients. Isn't it better to have such control within the kernel ?
If it is memory that is used by the kernel it should be reported as memory
and have the memory map.
If this is a hole in the memory layout from the kernel perspective, then
kernel should not bother with this memory.
Hi Mike,
We've put effort on bootloader side to implement the similar suggestion
of os bootloader to convey the reserved memory by omit the hole from
/memory@0{reg=[]} directly.
While there is a concern from device tree spec perspective, link [1]: "A
memory device node is required for all devicetrees and describes the
physical memory layout for the system. "
Do you have any idea on this pls?
[1]
https://github.com/devicetree-org/devicetree-specification/blob/main/source/chapter3-devicenodes.rst
And I'm not buying "low memory target" argument if you have enough memory
to carve out ~600M for some mysterious clients.
Just for your information, for low memory target, the carve out can be
more than ~60M out of 128M in total.
Let me know your comments on these.
Thanks,
Vijay
--
Thx and BRs,
Aiqun(Maria) Yu
