On Tue, Dec 12, 2023 at 8:03 PM Kairui Song <ryncsn@xxxxxxxxx> wrote: > > Kairui Song <ryncsn@xxxxxxxxx> 于2023年12月12日周二 14:52写道： > > > > Yu Zhao <yuzhao@xxxxxxxxxx> 于2023年12月12日周二 06:07写道： > > > > > > On Fri, Dec 8, 2023 at 1:24 AM Kairui Song <ryncsn@xxxxxxxxx> wrote: > > > > > > > > Yu Zhao <yuzhao@xxxxxxxxxx> 于2023年12月8日周五 14:14写道： > > > > > > > > > > Unmapped folios accessed through file descriptors can be > > > > > underprotected. Those folios are added to the oldest generation based > > > > > on: > > > > > 1. The fact that they are less costly to reclaim (no need to walk the > > > > > rmap and flush the TLB) and have less impact on performance (don't > > > > > cause major PFs and can be non-blocking if needed again). > > > > > 2. The observation that they are likely to be single-use. E.g., for > > > > > client use cases like Android, its apps parse configuration files > > > > > and store the data in heap (anon); for server use cases like MySQL, > > > > > it reads from InnoDB files and holds the cached data for tables in > > > > > buffer pools (anon). > > > > > > > > > > However, the oldest generation can be very short lived, and if so, it > > > > > doesn't provide the PID controller with enough time to respond to a > > > > > surge of refaults. (Note that the PID controller uses weighted > > > > > refaults and those from evicted generations only take a half of the > > > > > whole weight.) In other words, for a short lived generation, the > > > > > moving average smooths out the spike quickly. > > > > > > > > > > To fix the problem: > > > > > 1. For folios that are already on LRU, if they can be beyond the > > > > > tracking range of tiers, i.e., five accesses through file > > > > > descriptors, move them to the second oldest generation to give them > > > > > more time to age. (Note that tiers are used by the PID controller > > > > > to statistically determine whether folios accessed multiple times > > > > > through file descriptors are worth protecting.) > > > > > 2. When adding unmapped folios to LRU, adjust the placement of them so > > > > > that they are not too close to the tail. The effect of this is > > > > > similar to the above. > > > > > > > > > > On Android, launching 55 apps sequentially: > > > > > Before After Change > > > > > workingset_refault_anon 25641024 25598972 0% > > > > > workingset_refault_file 115016834 106178438 -8% > > > > > > > > Hi Yu, > > > > > > > > Thanks you for your amazing works on MGLRU. > > > > > > > > I believe this is the similar issue I was trying to resolve previously: > > > > https://lwn.net/Articles/945266/ > > > > The idea is to use refault distance to decide if the page should be > > > > place in oldest generation or some other gen, which per my test, > > > > worked very well, and we have been using refault distance for MGLRU in > > > > multiple workloads. > > > > > > > > There are a few issues left in my previous RFC series, like anon pages > > > > in MGLRU shouldn't be considered, I wanted to collect feedback or test > > > > cases, but unfortunately it seems didn't get too much attention > > > > upstream. > > > > > > > > I think both this patch and my previous series are for solving the > > > > file pages underpertected issue, and I did a quick test using this > > > > series, for mongodb test, refault distance seems still a better > > > > solution (I'm not saying these two optimization are mutually exclusive > > > > though, just they do have some conflicts in implementation and solving > > > > similar problem): > > > > > > > > Previous result: > > > > ================================================================== > > > > Execution Results after 905 seconds > > > > ------------------------------------------------------------------ > > > > Executed Time (µs) Rate > > > > STOCK_LEVEL 2542 27121571486.2 0.09 txn/s > > > > ------------------------------------------------------------------ > > > > TOTAL 2542 27121571486.2 0.09 txn/s > > > > > > > > This patch: > > > > ================================================================== > > > > Execution Results after 900 seconds > > > > ------------------------------------------------------------------ > > > > Executed Time (µs) Rate > > > > STOCK_LEVEL 1594 27061522574.4 0.06 txn/s > > > > ------------------------------------------------------------------ > > > > TOTAL 1594 27061522574.4 0.06 txn/s > > > > > > > > Unpatched version is always around ~500. > > > > > > Thanks for the test results! > > > > > > > I think there are a few points here: > > > > - Refault distance make use of page shadow so it can better > > > > distinguish evicted pages of different access pattern (re-access > > > > distance). > > > > - Throttled refault distance can help hold part of workingset when > > > > memory is too small to hold the whole workingset. > > > > > > > > So maybe part of this patch and the bits of previous series can be > > > > combined to work better on this issue, how do you think? > > > > > > I'll try to find some time this week to look at your RFC. It'd be a > > Hi Yu, > > I'm working on V4 of the RFC now, which just update some comments, and > skip anon page re-activation in refault path for mglru which was not > very helpful, only some tiny adjustment. > And I found it easier to test with fio, using following test script: > > #!/bin/bash > swapoff -a > > modprobe brd rd_nr=1 rd_size=16777216 > mkfs.ext4 /dev/ram0 > mount /dev/ram0 /mnt > > mkdir -p /sys/fs/cgroup/benchmark > cd /sys/fs/cgroup/benchmark > > echo 4G > memory.max > echo $$ > cgroup.procs > echo 3 > /proc/sys/vm/drop_caches > > fio -name=mglru --numjobs=12 --directory=/mnt --size=1024m \ > --buffered=1 --ioengine=io_uring --iodepth=128 \ > --iodepth_batch_submit=32 --iodepth_batch_complete=32 \ > --rw=randread --random_distribution=zipf:0.5 --norandommap \ > --time_based --ramp_time=5m --runtime=5m --group_reporting > > zipf:0.5 is used here to simulate a cached read with slight bias > towards certain pages. > Unpatched 6.7-rc4: > Run status group 0 (all jobs): > READ: bw=6548MiB/s (6866MB/s), 6548MiB/s-6548MiB/s > (6866MB/s-6866MB/s), io=1918GiB (2060GB), run=300001-300001msec > > Patched with RFC v4: > Run status group 0 (all jobs): > READ: bw=7270MiB/s (7623MB/s), 7270MiB/s-7270MiB/s > (7623MB/s-7623MB/s), io=2130GiB (2287GB), run=300001-300001msec > > Patched with this series: > Run status group 0 (all jobs): > READ: bw=7098MiB/s (7442MB/s), 7098MiB/s-7098MiB/s > (7442MB/s-7442MB/s), io=2079GiB (2233GB), run=300002-300002msec > > MGLRU off: > Run status group 0 (all jobs): > READ: bw=6525MiB/s (6842MB/s), 6525MiB/s-6525MiB/s > (6842MB/s-6842MB/s), io=1912GiB (2052GB), run=300002-300002msec > > - If I change zipf:0.5 to random: > Unpatched 6.7-rc4: > Patched with this series: > Run status group 0 (all jobs): > READ: bw=5975MiB/s (6265MB/s), 5975MiB/s-5975MiB/s > (6265MB/s-6265MB/s), io=1750GiB (1879GB), run=300002-300002msec > > Patched with RFC v4: > Run status group 0 (all jobs): > READ: bw=5987MiB/s (6278MB/s), 5987MiB/s-5987MiB/s > (6278MB/s-6278MB/s), io=1754GiB (1883GB), run=300001-300001msec > > Patched with this series: > Run status group 0 (all jobs): > READ: bw=5839MiB/s (6123MB/s), 5839MiB/s-5839MiB/s > (6123MB/s-6123MB/s), io=1711GiB (1837GB), run=300001-300001msec > > MGLRU off: > Run status group 0 (all jobs): > READ: bw=5689MiB/s (5965MB/s), 5689MiB/s-5689MiB/s > (5965MB/s-5965MB/s), io=1667GiB (1790GB), run=300003-300003msec > > fio uses ramdisk so LRU accuracy will have smaller impact. The Mongodb > test I provided before uses a SATA SSD so it will have a much higher > impact. I'll provides a script to setup the test case and run it, it's > more complex to setup than fio since involving setting up multiple > replicas and auth and hundreds of GB of test fixtures, I'm currently > occupied by some other tasks but will try best to send them out as > soon as possible. Thanks! Apparently your RFC did show better IOPS with both access patterns, which was a surprise to me because it had higher refaults and usually higher refautls result in worse performance. So I'm still trying to figure out why it turned out the opposite. My current guess is that: 1. It had a very small but stable inactive LRU list, which was able to fit into the L3 cache entirely. 2. It counted few folios as workingset and therefore incurred less overhead from CONFIG_PSI and/or CONFIG_TASK_DELAY_ACCT. Did you save workingset_refault_file when you ran the test? If so, can you check the difference between this series and your RFC?
