Re: [PATCH v2 14/14] arm64/mm: Add ptep_get_and_clear_full() to optimize process teardown

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 30, 2023 at 8:00 PM Ryan Roberts <ryan.roberts@xxxxxxx> wrote:
>
> >> Just because you found a pte that maps a page from a large folio, that doesn't
> >> mean that all pages from the folio are mapped, and it doesn't mean they are
> >> mapped contiguously. We have to deal with partial munmap(), partial mremap()
> >> etc. We could split in these cases (and in future it might be sensible to try),
> >> but that can fail (due to GUP). So we still have to handle the corner case.
> >>
> >> But I can imagine doing a batched version of ptep_get_and_clear(), like I did
> >> for ptep_set_wrprotects(). And I think this would be an improvement.
> >>
> >> The reason I haven't done that so far, is because ptep_get_and_clear() returns
> >> the pte value when it was cleared and that's hard to do if batching due to the
> >> storage requirement. But perhaps you could just return the logical OR of the
> >> dirty and young bits across all ptes in the batch. The caller should be able to
> >> reconstitute the rest if it needs it?
> >>
> >> What do you think?
> >
> > I really don't know why we care about the return value of ptep_get_and_clear()
> > as zap_pte_range() doesn't ask for any ret value at all. so why not totally give
> > up this kind of complex logical OR of dirty and young as they are useless in
> > this case?
>
> That's not the case in v6.7-rc1:
>
>
> static unsigned long zap_pte_range(struct mmu_gather *tlb,
>                                 struct vm_area_struct *vma, pmd_t *pmd,
>                                 unsigned long addr, unsigned long end,
>                                 struct zap_details *details)
> {
>         ...
>
>         do {
>                 pte_t ptent = ptep_get(pte);
>
>                 ...
>
>                 if (pte_present(ptent)) {
>                         ...
>
>                         ptent = ptep_get_and_clear_full(mm, addr, pte,
>                                                         tlb->fullmm);
>                         arch_check_zapped_pte(vma, ptent);
>                         tlb_remove_tlb_entry(tlb, pte, addr);
>                         zap_install_uffd_wp_if_needed(vma, addr, pte, details,
>                                                       ptent);
>                         if (unlikely(!page)) {
>                                 ksm_might_unmap_zero_page(mm, ptent);
>                                 continue;
>                         }
>
>                         delay_rmap = 0;
>                         if (!PageAnon(page)) {
>                                 if (pte_dirty(ptent)) {
>                                         set_page_dirty(page);
>                                         if (tlb_delay_rmap(tlb)) {
>                                                 delay_rmap = 1;
>                                                 force_flush = 1;
>                                         }
>                                 }
>                                 if (pte_young(ptent) && likely(vma_has_recency(vma)))
>                                         mark_page_accessed(page);
>                         }
>
>                         ...
>                 }
>
>                 ...
>         } while (pte++, addr += PAGE_SIZE, addr != end);
>
>         ...
> }
>
> Most importantly, file-backed mappings need the access/dirty bits to propagate that information back to the folio, so it will be written back to disk. x86 is also looking at the dirty bit in arch_check_zapped_pte(), and ksm is using it in ksm_might_unmap_zero_page().
>
> Probably for your use case of anon memory on arm64 on a phone, you don't need the return value. But my solution is also setting cotnpte for file-backed memory, and there are performance wins to be had there, especially for executable mappings where contpte reduces iTLB pressure. (I have other work which ensures these file-backed mappings are in correctly-sized large folios).
>
> So I don't think we can just do a clear without the get part. But I think I have a solution in the shape of clear_ptes(), as described in the other thread, which gives the characteristics you suggest.

understood. i realized OPPO's code actually also returned logic OR of
dirty and access bits while it exposes
CONTPTE to mm-core [1]:

static pte_t get_clear_flush(struct mm_struct *mm,
                             unsigned long addr,
                             pte_t *ptep,
                             unsigned long pgsize,
                             unsigned long ncontig,
                             bool flush)
{
        pte_t orig_pte = ptep_get(ptep);
        bool valid = pte_valid(orig_pte);
        unsigned long i, saddr = addr;

        for (i = 0; i < ncontig; i++, addr += pgsize, ptep++) {
                pte_t pte = ptep_get_and_clear(mm, addr, ptep);

                if (pte_dirty(pte))
                        orig_pte = pte_mkdirty(orig_pte);

                if (pte_young(pte))
                        orig_pte = pte_mkyoung(orig_pte);
        }

        if (valid && flush) {
                struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0);

                flush_tlb_range(&vma, saddr, addr);
        }
        return orig_pte;
}

static inline pte_t __cont_pte_huge_ptep_get_and_clear_flush(struct
mm_struct *mm,
                                       unsigned long addr,
                                       pte_t *ptep,
                                       bool flush)
{
        pte_t orig_pte = ptep_get(ptep);

        CHP_BUG_ON(!pte_cont(orig_pte));
        CHP_BUG_ON(!IS_ALIGNED(addr, HPAGE_CONT_PTE_SIZE));
        CHP_BUG_ON(!IS_ALIGNED(pte_pfn(orig_pte), HPAGE_CONT_PTE_NR));

        return get_clear_flush(mm, addr, ptep, PAGE_SIZE, CONT_PTES, flush);
}

[1] https://github.com/OnePlusOSS/android_kernel_oneplus_sm8550/blob/oneplus/sm8550_u_14.0.0_oneplus11/mm/cont_pte_hugepage.c#L1421

>
>
> >
> > Is it possible for us to introduce a new api like?
> >
> > bool clear_folio_ptes(folio, ptep)
> > {
> >     if(ptes are contiguous mapped) {
> >            clear all ptes all together    // this also clears all CONTPTE
> >            return true;
> >     }
> >     return false;
> > }
> >
> > in zap_pte_range():
> >
> > if (large_folio(folio) && clear_folio_ptes(folio, ptep)) {
> >          addr += nr - 1
> >          pte += nr  -1
> > } else
> >          old path.
> >
> >
> >>
> >>>
> >>> zap_pte_range is the most frequent behaviour from userspace libc heap
> >>> as i explained
> >>> before. libc can call madvise(DONTNEED) the most often. It is crucial
> >>> to performance.
> >>>
> >>> and this way can also help drop your full version by moving to full
> >>> flushing the whole
> >>> large folios? and we don't need to depend on fullmm any more?
> >>>
> >>>>
> >>>> I don't think there is any correctness issue here. But there is a problem with
> >>>> fragility, as raised by Alistair. I have some ideas on potentially how to solve
> >>>> that. I'm going to try to work on it this afternoon and will post if I get some
> >>>> confidence that it is a real solution.
> >>>>
> >>>> Thanks,
> >>>> Ryan
> >>>>
> >>>>>
> >>>>> static inline pte_t __cont_pte_huge_ptep_get_and_clear_flush(struct mm_struct *mm,
> >>>>>                                      unsigned long addr,
> >>>>>                                      pte_t *ptep,
> >>>>>                                      bool flush)
> >>>>> {
> >>>>>       pte_t orig_pte = ptep_get(ptep);
> >>>>>
> >>>>>       CHP_BUG_ON(!pte_cont(orig_pte));
> >>>>>       CHP_BUG_ON(!IS_ALIGNED(addr, HPAGE_CONT_PTE_SIZE));
> >>>>>       CHP_BUG_ON(!IS_ALIGNED(pte_pfn(orig_pte), HPAGE_CONT_PTE_NR));
> >>>>>
> >>>>>       return get_clear_flush(mm, addr, ptep, PAGE_SIZE, CONT_PTES, flush);
> >>>>> }
> >>>>>
> >>>>> [1] https://github.com/OnePlusOSS/android_kernel_oneplus_sm8550/blob/oneplus/sm8550_u_14.0.0_oneplus11/mm/memory.c#L1539
> >>>>>
> >>>>>> +     */
> >>>>>> +
> >>>>>> +    return __ptep_get_and_clear(mm, addr, ptep);
> >>>>>> +}
> >>>>>> +EXPORT_SYMBOL(contpte_ptep_get_and_clear_full);
> >>>>>> +
> >>>>>
> >>>
> >  Thanks
> >  Barry
>





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux