Re: [mm-unstable v4 3/5] mm: memcg: make stats flushing threshold per-memcg

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 29, 2023 at 03:21:51AM +0000, Yosry Ahmed wrote:
> A global counter for the magnitude of memcg stats update is maintained
> on the memcg side to avoid invoking rstat flushes when the pending
> updates are not significant. This avoids unnecessary flushes, which are
> not very cheap even if there isn't a lot of stats to flush. It also
> avoids unnecessary lock contention on the underlying global rstat lock.
> 
> Make this threshold per-memcg. The scheme is followed where percpu (now
> also per-memcg) counters are incremented in the update path, and only
> propagated to per-memcg atomics when they exceed a certain threshold.
> 
> This provides two benefits:
> (a) On large machines with a lot of memcgs, the global threshold can be
> reached relatively fast, so guarding the underlying lock becomes less
> effective. Making the threshold per-memcg avoids this.
> 
> (b) Having a global threshold makes it hard to do subtree flushes, as we
> cannot reset the global counter except for a full flush. Per-memcg
> counters removes this as a blocker from doing subtree flushes, which
> helps avoid unnecessary work when the stats of a small subtree are
> needed.
> 
> Nothing is free, of course. This comes at a cost:
> (a) A new per-cpu counter per memcg, consuming NR_CPUS * NR_MEMCGS * 4
> bytes. The extra memory usage is insigificant.
> 
> (b) More work on the update side, although in the common case it will
> only be percpu counter updates. The amount of work scales with the
> number of ancestors (i.e. tree depth). This is not a new concept, adding
> a cgroup to the rstat tree involves a parent loop, so is charging.
> Testing results below show no significant regressions.
> 
> (c) The error margin in the stats for the system as a whole increases
> from NR_CPUS * MEMCG_CHARGE_BATCH to NR_CPUS * MEMCG_CHARGE_BATCH *
> NR_MEMCGS. This is probably fine because we have a similar per-memcg
> error in charges coming from percpu stocks, and we have a periodic
> flusher that makes sure we always flush all the stats every 2s anyway.
> 
> This patch was tested to make sure no significant regressions are
> introduced on the update path as follows. The following benchmarks were
> ran in a cgroup that is 2 levels deep (/sys/fs/cgroup/a/b/):
> 
> (1) Running 22 instances of netperf on a 44 cpu machine with
> hyperthreading disabled. All instances are run in a level 2 cgroup, as
> well as netserver:
>   # netserver -6
>   # netperf -6 -H ::1 -l 60 -t TCP_SENDFILE -- -m 10K
> 
> Averaging 20 runs, the numbers are as follows:
> Base: 40198.0 mbps
> Patched: 38629.7 mbps (-3.9%)
> 
> The regression is minimal, especially for 22 instances in the same
> cgroup sharing all ancestors (so updating the same atomics).
> 
> (2) will-it-scale page_fault tests. These tests (specifically
> per_process_ops in page_fault3 test) detected a 25.9% regression before
> for a change in the stats update path [1]. These are the
> numbers from 10 runs (+ is good) on a machine with 256 cpus:
> 
>              LABEL            |     MEAN    |   MEDIAN    |   STDDEV   |
> ------------------------------+-------------+-------------+-------------
>   page_fault1_per_process_ops |             |             |            |
>   (A) base                    | 270249.164  | 265437.000  | 13451.836  |
>   (B) patched                 | 261368.709  | 255725.000  | 13394.767  |
>                               | -3.29%      | -3.66%      |            |
>   page_fault1_per_thread_ops  |             |             |            |
>   (A) base                    | 242111.345  | 239737.000  | 10026.031  |
>   (B) patched                 | 237057.109  | 235305.000  | 9769.687   |
>                               | -2.09%      | -1.85%      |            |
>   page_fault1_scalability     |             |             |
>   (A) base                    | 0.034387    | 0.035168    | 0.0018283  |
>   (B) patched                 | 0.033988    | 0.034573    | 0.0018056  |
>                               | -1.16%      | -1.69%      |            |
>   page_fault2_per_process_ops |             |             |
>   (A) base                    | 203561.836  | 203301.000  | 2550.764   |
>   (B) patched                 | 197195.945  | 197746.000  | 2264.263   |
>                               | -3.13%      | -2.73%      |            |
>   page_fault2_per_thread_ops  |             |             |
>   (A) base                    | 171046.473  | 170776.000  | 1509.679   |
>   (B) patched                 | 166626.327  | 166406.000  | 768.753    |
>                               | -2.58%      | -2.56%      |            |
>   page_fault2_scalability     |             |             |
>   (A) base                    | 0.054026    | 0.053821    | 0.00062121 |
>   (B) patched                 | 0.053329    | 0.05306     | 0.00048394 |
>                               | -1.29%      | -1.41%      |            |
>   page_fault3_per_process_ops |             |             |
>   (A) base                    | 1295807.782 | 1297550.000 | 5907.585   |
>   (B) patched                 | 1275579.873 | 1273359.000 | 8759.160   |
>                               | -1.56%      | -1.86%      |            |
>   page_fault3_per_thread_ops  |             |             |
>   (A) base                    | 391234.164  | 390860.000  | 1760.720   |
>   (B) patched                 | 377231.273  | 376369.000  | 1874.971   |
>                               | -3.58%      | -3.71%      |            |
>   page_fault3_scalability     |             |             |
>   (A) base                    | 0.60369     | 0.60072     | 0.0083029  |
>   (B) patched                 | 0.61733     | 0.61544     | 0.009855   |
>                               | +2.26%      | +2.45%      |            |
> 
> All regressions seem to be minimal, and within the normal variance for
> the benchmark. The fix for [1] assumes that 3% is noise -- and there
> were no further practical complaints), so hopefully this means that such
> variations in these microbenchmarks do not reflect on practical
> workloads.
> 
> (3) I also ran stress-ng in a nested cgroup and did not observe any
> obvious regressions.
> 
> [1]https://lore.kernel.org/all/20190520063534.GB19312@shao2-debian/
> 
> Suggested-by: Johannes Weiner <hannes@xxxxxxxxxxx>
> Signed-off-by: Yosry Ahmed <yosryahmed@xxxxxxxxxx>
> Tested-by: Domenico Cerasuolo <cerasuolodomenico@xxxxxxxxx>

Acked-by: Shakeel Butt <shakeelb@xxxxxxxxxx>




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux