Re: [PATCH v3 00/19] stackdepot: allow evicting stack traces

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 24, 2023 at 3:14 PM Marco Elver <elver@xxxxxxxxxx> wrote:
>
> 1. I know fixed-sized slots are need for eviction to work, but have
> you evaluated if this causes some excessive memory waste now? Or is it
> negligible?

With the current default stack depot slot size of 64 frames, a single
stack trace takes up ~3-4x on average compared to precisely sized
slots (KMSAN is closer to ~4x due to its 3-frame-sized linking
records).

However, as the tag-based KASAN modes evict old stack traces, the
average total amount of memory used for stack traces is ~0.5 MB (with
the default stack ring size of 32k entries).

I also have just mailed an eviction implementation for Generic KASAN.
With it, the stack traces take up ~1 MB per 1 GB of RAM while running
syzkaller (stack traces are evicted when they are flushed from
quarantine, and quarantine's size depends on the amount of RAM.)

The only problem is KMSAN. Based on a discussion with Alexander, it
might not be possible to implement the eviction for it. So I suspect,
with this change, syzbot might run into the capacity WARNING from time
to time.

The simplest solution would be to bump the maximum size of stack depot
storage to x4 if KMSAN is enabled (to 512 MB from the current 128 MB).
KMSAN requires a significant amount of RAM for shadow anyway.

Would that be acceptable?

> If it turns out to be a problem, one way out would be to partition the
> freelist into stack size classes; e.g. one for each of stack traces of
> size 8, 16, 32, 64.

This shouldn't be hard to implement.

However, as one of the perf improvements, I'm thinking of saving a
stack trace directly into a stack depot slot (to avoid copying it).
With this, we won't know the stack trace size before it is saved. So
this won't work together with the size classes.

> 2. I still think switching to the percpu_rwsem right away is the right
> thing, and not actually a downside. I mentioned this before, but you
> promised a follow-up patch, so I trust that this will happen. ;-)

First thing on my TODO list wrt perf improvements :)

> Acked-by: Marco Elver <elver@xxxxxxxxxx>
>
> The series looks good in its current state. However, see my 2
> higher-level comments above.

Thank you!





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux