On Thu, Sep 28, 2023 at 04:47:59PM +0800, Yajun Deng wrote:
>
> On 2023/9/28 14:16, Mike Rapoport wrote:
> > On Wed, Sep 27, 2023 at 09:37:52AM +0800, Yajun Deng wrote:
> > > There is round twice in memblock_add_range(). The first counts the number
> > > of regions needed to accommodate the new area. The second actually inserts
> > > them. But the first round isn't really needed, we just need to check the
> > > counts before inserting them.
> > >
> > > Check the count before calling memblock_insert_region(). If the count is
> > > equal to the maximum value, it needs to resize the array. Otherwise,
> > > insert it directly.
> > >
> > > To avoid nested calls to memblock_add_range(), we need to call
> > > memblock_reserve() out of memblock_double_array().
> > memblock_add_range() does an extra loop once in a while, but I don't think
> > removing it will have any actual effect on the boot time.
>
>
> Yes, it has no obvious actual effect on the boot time, but it does reduce
> the number of unnecessary loop.
>
> The actual effect on the boot time should not be the only criterion for
> whether a patch is accepted or not.
>
> Since the comment in the previous code, it tells the user that it would be
> executed twice, this can be misleading to users.
>
> So the new code will be simpler and clearer. It not just change the code,
> but also remove the comment
Adding return-by-pointer parameters to memblock_double_array() and pulling
memblock_reserve() out of this function is in no way simpler and clearer
that having an extra loop.
If the comment is wrong, just fix the comment.
> about "executed twice", it obviously tells the user only resize the array
> if it is equal to the maximum value
>
> and doesn't need to be executed twice.
>
> > > Signed-off-by: Yajun Deng <yajun.deng@xxxxxxxxx>
> > > ---
> > > mm/memblock.c | 117 ++++++++++++++++++++++++--------------------------
> > > 1 file changed, 57 insertions(+), 60 deletions(-)
> > >
> > > diff --git a/mm/memblock.c b/mm/memblock.c
> > > index 5a88d6d24d79..3f44c84f5d0b 100644
> > > --- a/mm/memblock.c
> > > +++ b/mm/memblock.c
> > > @@ -400,6 +400,8 @@ void __init memblock_discard(void)
> > > * @type: memblock type of the regions array being doubled
> > > * @new_area_start: starting address of memory range to avoid overlap with
> > > * @new_area_size: size of memory range to avoid overlap with
> > > + * @new_reserve_base: starting address of new array
> > > + * @new_reserve_size: size of new array
> > > *
> > > * Double the size of the @type regions array. If memblock is being used to
> > > * allocate memory for a new reserved regions array and there is a previously
> > > @@ -412,7 +414,9 @@ void __init memblock_discard(void)
> > > */
> > > static int __init_memblock memblock_double_array(struct memblock_type *type,
> > > phys_addr_t new_area_start,
> > > - phys_addr_t new_area_size)
> > > + phys_addr_t new_area_size,
> > > + phys_addr_t *new_reserve_base,
> > > + phys_addr_t *new_reserve_size)
> > > {
> > > struct memblock_region *new_array, *old_array;
> > > phys_addr_t old_alloc_size, new_alloc_size;
> > > @@ -490,11 +494,13 @@ static int __init_memblock memblock_double_array(struct memblock_type *type,
> > > memblock_free(old_array, old_alloc_size);
> > > /*
> > > - * Reserve the new array if that comes from the memblock. Otherwise, we
> > > - * needn't do it
> > > + * Keep the address and size if that comes from the memblock. Otherwise,
> > > + * we needn't do it.
> > > */
> > > - if (!use_slab)
> > > - BUG_ON(memblock_reserve(addr, new_alloc_size));
> > > + if (!use_slab) {
> > > + *new_reserve_base = addr;
> > > + *new_reserve_size = new_alloc_size;
> > > + }
> > > /* Update slab flag */
> > > *in_slab = use_slab;
> > > @@ -588,11 +594,12 @@ static int __init_memblock memblock_add_range(struct memblock_type *type,
> > > phys_addr_t base, phys_addr_t size,
> > > int nid, enum memblock_flags flags)
> > > {
> > > - bool insert = false;
> > > phys_addr_t obase = base;
> > > phys_addr_t end = base + memblock_cap_size(base, &size);
> > > - int idx, nr_new, start_rgn = -1, end_rgn;
> > > + phys_addr_t new_base = 0, new_size;
> > > + int idx, start_rgn = -1, end_rgn;
> > > struct memblock_region *rgn;
> > > + unsigned long ocnt = type->cnt;
> > > if (!size)
> > > return 0;
> > > @@ -608,25 +615,6 @@ static int __init_memblock memblock_add_range(struct memblock_type *type,
> > > return 0;
> > > }
> > > - /*
> > > - * The worst case is when new range overlaps all existing regions,
> > > - * then we'll need type->cnt + 1 empty regions in @type. So if
> > > - * type->cnt * 2 + 1 is less than or equal to type->max, we know
> > > - * that there is enough empty regions in @type, and we can insert
> > > - * regions directly.
> > > - */
> > > - if (type->cnt * 2 + 1 <= type->max)
> > > - insert = true;
> > > -
> > > -repeat:
> > > - /*
> > > - * The following is executed twice. Once with %false @insert and
> > > - * then with %true. The first counts the number of regions needed
> > > - * to accommodate the new area. The second actually inserts them.
> > > - */
> > > - base = obase;
> > > - nr_new = 0;
> > > -
> > > for_each_memblock_type(idx, type, rgn) {
> > > phys_addr_t rbase = rgn->base;
> > > phys_addr_t rend = rbase + rgn->size;
> > > @@ -644,15 +632,23 @@ static int __init_memblock memblock_add_range(struct memblock_type *type,
> > > WARN_ON(nid != memblock_get_region_node(rgn));
> > > #endif
> > > WARN_ON(flags != rgn->flags);
> > > - nr_new++;
> > > - if (insert) {
> > > - if (start_rgn == -1)
> > > - start_rgn = idx;
> > > - end_rgn = idx + 1;
> > > - memblock_insert_region(type, idx++, base,
> > > - rbase - base, nid,
> > > - flags);
> > > - }
> > > +
> > > + /*
> > > + * If type->cnt is equal to type->max, it means there's
> > > + * not enough empty region and the array needs to be
> > > + * resized. Otherwise, insert it directly.
> > > + */
> > > + if ((type->cnt == type->max) &&
> > > + memblock_double_array(type, obase, size,
> > > + &new_base, &new_size))
> > > + return -ENOMEM;
> > > +
> > > + if (start_rgn == -1)
> > > + start_rgn = idx;
> > > + end_rgn = idx + 1;
> > > + memblock_insert_region(type, idx++, base,
> > > + rbase - base, nid,
> > > + flags);
> > > }
> > > /* area below @rend is dealt with, forget about it */
> > > base = min(rend, end);
> > > @@ -660,33 +656,28 @@ static int __init_memblock memblock_add_range(struct memblock_type *type,
> > > /* insert the remaining portion */
> > > if (base < end) {
> > > - nr_new++;
> > > - if (insert) {
> > > - if (start_rgn == -1)
> > > - start_rgn = idx;
> > > - end_rgn = idx + 1;
> > > - memblock_insert_region(type, idx, base, end - base,
> > > - nid, flags);
> > > - }
> > > + if ((type->cnt == type->max) &&
> > > + memblock_double_array(type, obase, size,
> > > + &new_base, &new_size))
> > > + return -ENOMEM;
> > > +
> > > + if (start_rgn == -1)
> > > + start_rgn = idx;
> > > + end_rgn = idx + 1;
> > > + memblock_insert_region(type, idx, base, end - base,
> > > + nid, flags);
> > > }
> > > - if (!nr_new)
> > > + if (ocnt == type->cnt)
> > > return 0;
> > > - /*
> > > - * If this was the first round, resize array and repeat for actual
> > > - * insertions; otherwise, merge and return.
> > > - */
> > > - if (!insert) {
> > > - while (type->cnt + nr_new > type->max)
> > > - if (memblock_double_array(type, obase, size) < 0)
> > > - return -ENOMEM;
> > > - insert = true;
> > > - goto repeat;
> > > - } else {
> > > - memblock_merge_regions(type, start_rgn, end_rgn);
> > > - return 0;
> > > - }
> > > + memblock_merge_regions(type, start_rgn, end_rgn);
> > > +
> > > + /* Reserve the new array */
> > > + if (new_base)
> > > + memblock_reserve(new_base, new_size);
> > > +
> > > + return 0;
> > > }
> > > /**
> > > @@ -755,6 +746,7 @@ static int __init_memblock memblock_isolate_range(struct memblock_type *type,
> > > int *start_rgn, int *end_rgn)
> > > {
> > > phys_addr_t end = base + memblock_cap_size(base, &size);
> > > + phys_addr_t new_base = 0, new_size;
> > > int idx;
> > > struct memblock_region *rgn;
> > > @@ -764,10 +756,15 @@ static int __init_memblock memblock_isolate_range(struct memblock_type *type,
> > > return 0;
> > > /* we'll create at most two more regions */
> > > - while (type->cnt + 2 > type->max)
> > > - if (memblock_double_array(type, base, size) < 0)
> > > + if (type->cnt + 2 > type->max) {
> > > + if (memblock_double_array(type, base, size,
> > > + &new_base, &new_size))
> > > return -ENOMEM;
> > > + if (new_base)
> > > + memblock_reserve(new_base, new_size);
> > > + }
> > > +
> > > for_each_memblock_type(idx, type, rgn) {
> > > phys_addr_t rbase = rgn->base;
> > > phys_addr_t rend = rbase + rgn->size;
> > > --
> > > 2.25.1
> > >
--
Sincerely yours,
Mike.
