This series adds a multi-page clearing primitive, clear_pages(),
which enables more effective use of x86 string instructions by
advertising the real region-size to be cleared.
Region-size can be used as a hint by uarchs to optimize the
clearing.
Also add allow_resched() which marks a code-section as allowing
rescheduling in the irqentry_exit path. This allows clear_pages()
to get by without having to call cond_sched() periodically.
(preempt_model_full() already handles this via
irqentry_exit_cond_resched(), so we handle this similarly for
preempt_model_none() and preempt_model_voluntary().)
Performance
==
With this demand fault performance gets a decent increase:
*Milan* mm/clear_huge_page x86/clear_huge_page change
(GB/s) (GB/s)
pg-sz=2MB 14.55 19.29 +32.5%
pg-sz=1GB 19.34 49.60 +156.4%
Milan (and some other AMD Zen uarchs tested) take advantage of the
hint to elide cacheline allocation for pg-sz=1GB. The cut-off for
this optimization seems to be at around region-size > LLC-size so
the pg-sz=2MB load still allocates cachelines.
*Icelakex* mm/clear_huge_page x86/clear_huge_page change
(GB/s) (GB/s)
pg-sz=2MB 9.19 12.94 +40.8%
pg-sz=1GB 9.36 12.97 +38.5%
Icelakex sees a decent improvement in performance but for both
region-sizes does continue to allocate cachelines.
Negative: there is, a downside to clearing in larger chunks: the
current approach clears page-at-a-time, narrowing towards
the faulting subpage. This has better cache characteristics for
some sequential access workloads where subpages near the faulting
page have a greater likelihood of access.
I'm not sure if there are real cases which care about this workload
but one example is the vm-scalability/case-anon-w-seq-hugetlb test.
This test starts a process for each online CPU, with each process
writing sequentially to its set of hugepages.
The bottleneck here is the memory pipe and so the improvement in
stime is limited, and because the clearing is less cache-optimal
now, utime suffers from worse user cache misses.
*Icelakex* mm/clear_huge_page x86/clear_huge_page change
(tasks=128, mem=4GB/task)
stime 286.8 +- 3.6% 243.9 +- 4.1% -14.9%
utime 497.7 +- 4.1% 553.5 +- 2.0% +11.2%
wall-clock 6.9 +- 2.8% 7.0 +- 1.4% + 1.4%
*Milan* mm/clear_huge_page x86/clear_huge_page change
(mem=1GB/task, tasks=512)
stime 501.3 +- 1.4% 498.0 +- 0.9% -0.5%
utime 298.7 +- 1.1% 335.0 +- 2.2% +12.1%
wall-clock 3.5 +- 2.8% 3.8 +- 2.6% +8.5%
The same test performs better if we have a smaller number of processes,
since there is more backend BW available, and thus the improved stime
compensates for the worse utime.
This could be improved by using more circuitous chunking (somewhat
like this:
https://lore.kernel.org/lkml/20220606203725.1313715-1-ankur.a.arora@xxxxxxxxxx/).
But I'm not sure if it is worth doing. Opinions?
Patches
==
Patch 1, 2, 3:
"mm/clear_huge_page: allow arch override for clear_huge_page()",
"mm/huge_page: separate clear_huge_page() and copy_huge_page()",
"mm/huge_page: cleanup clear_/copy_subpage()"
are minor. The first one allows clear_huge_page() to have an
arch specific version and the other two are mechanical cleanup
patches.
Patches 3, 4, 5:
"x86/clear_page: extend clear_page*() for multi-page clearing",
"x86/clear_page: add clear_pages()",
"x86/clear_huge_page: multi-page clearing"
define the x86 specific clear_pages() and clear_huge_pages().
Patches 6, 7, 8:
"sched: define TIF_ALLOW_RESCHED"
"irqentry: define irqentry_exit_allow_resched()"
which defines allow_resched() to demarcate preemptible sections.
This gets used in patch 9:
"x86/clear_huge_page: make clear_contig_region() preemptible".
Changelog:
v2:
- Addressed review comments from peterz, tglx.
- Removed clear_user_pages(), and CONFIG_X86_32:clear_pages()
- General code cleanup
Also at:
github.com/terminus/linux clear-pages.v2
Comments appreciated!
Ankur Arora (9):
mm/clear_huge_page: allow arch override for clear_huge_page()
mm/huge_page: separate clear_huge_page() and copy_huge_page()
mm/huge_page: cleanup clear_/copy_subpage()
x86/clear_page: extend clear_page*() for multi-page clearing
x86/clear_page: add clear_pages()
x86/clear_huge_page: multi-page clearing
sched: define TIF_ALLOW_RESCHED
irqentry: define irqentry_exit_allow_resched()
x86/clear_huge_page: make clear_contig_region() preemptible
arch/x86/include/asm/page_64.h | 27 +++--
arch/x86/include/asm/thread_info.h | 2 +
arch/x86/lib/clear_page_64.S | 52 ++++++---
arch/x86/mm/hugetlbpage.c | 59 ++++++++++
include/linux/entry-common.h | 13 +++
include/linux/sched.h | 30 +++++
kernel/entry/common.c | 13 ++-
kernel/sched/core.c | 32 ++---
mm/memory.c | 181 +++++++++++++++++------------
9 files changed, 297 insertions(+), 112 deletions(-)
--
2.31.1
