Re: [PATCH v18 2/5] fs/proc/task_mmu: Implement IOCTL to get and optionally clear info about PTEs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/16/23 1:07 AM, Michał Mirosław wrote:
> On Thu, 15 Jun 2023 at 17:11, Muhammad Usama Anjum
> <usama.anjum@xxxxxxxxxxxxx> wrote:
>> On 6/15/23 7:52 PM, Michał Mirosław wrote:
>>> On Thu, 15 Jun 2023 at 15:58, Muhammad Usama Anjum
>>> <usama.anjum@xxxxxxxxxxxxx> wrote:
>>>> I'll send next revision now.
>>>> On 6/14/23 11:00 PM, Michał Mirosław wrote:
>>>>> (A quick reply to answer open questions in case they help the next version.)
>>>>>
>>>>> On Wed, 14 Jun 2023 at 19:10, Muhammad Usama Anjum
>>>>> <usama.anjum@xxxxxxxxxxxxx> wrote:
>>>>>> On 6/14/23 8:14 PM, Michał Mirosław wrote:
>>>>>>> On Wed, 14 Jun 2023 at 15:46, Muhammad Usama Anjum
>>>>>>> <usama.anjum@xxxxxxxxxxxxx> wrote:
>>>>>>>>
>>>>>>>> On 6/14/23 3:36 AM, Michał Mirosław wrote:
>>>>>>>>> On Tue, 13 Jun 2023 at 12:29, Muhammad Usama Anjum
>>>>>>>>> <usama.anjum@xxxxxxxxxxxxx> wrote:
>>>>> [...]
>>>>>>>>>> +       if (cur_buf->bitmap == bitmap &&
>>>>>>>>>> +           cur_buf->start + cur_buf->len * PAGE_SIZE == addr) {
>>>>>>>>>> +               cur_buf->len += n_pages;
>>>>>>>>>> +               p->found_pages += n_pages;
>>>>>>>>>> +       } else {
>>>>>>>>>> +               if (cur_buf->len && p->vec_buf_index >= p->vec_buf_len)
>>>>>>>>>> +                       return -ENOMEM;
>>>>>>>>>
>>>>>>>>> Shouldn't this be -ENOSPC? -ENOMEM usually signifies that the kernel
>>>>>>>>> ran out of memory when allocating, not that there is no space in a
>>>>>>>>> user-provided buffer.
>>>>>>>> There are 3 kinds of return values here:
>>>>>>>> * PM_SCAN_FOUND_MAX_PAGES (1) ---> max_pages have been found. Abort the
>>>>>>>> page walk from next entry
>>>>>>>> * 0 ---> continue the page walk
>>>>>>>> * -ENOMEM --> Abort the page walk from current entry, user buffer is full
>>>>>>>> which is not error, but only a stop signal. This -ENOMEM is just
>>>>>>>> differentiater from (1). This -ENOMEM is for internal use and isn't
>>>>>>>> returned to user.
>>>>>>>
>>>>>>> But why ENOSPC is not good here? I was used before, I think.
>>>>>> -ENOSPC is being returned in form of true error from
>>>>>> pagemap_scan_hugetlb_entry(). So I'd to remove -ENOSPC from here as it
>>>>>> wasn't true error here, it was only a way to abort the walk immediately.
>>>>>> I'm liking the following erturn code from here now:
>>>>>>
>>>>>> #define PM_SCAN_BUFFER_FULL     (-256)
>>>>>
>>>>> I guess this will be reworked anyway, but I'd prefer this didn't need
>>>>> custom errors etc. If we agree to decoupling the selection and GET
>>>>> output, it could be:
>>>>>
>>>>> bool is_interesting_page(p, flags); // this one does the
>>>>> required/anyof/excluded match
>>>>> size_t output_range(p, start, len, flags); // this one fills the
>>>>> output vector and returns how many pages were fit
>>>>>
>>>>> In this setup, `is_interesting_page() && (n_out = output_range()) <
>>>>> n_pages` means this is the final range, no more will fit. And if
>>>>> `n_out == 0` then no pages fit and no WP is needed (no other special
>>>>> cases).
>>>> Right now, pagemap_scan_output() performs the work of both of these two
>>>> functions. The part can be broken into is_interesting_pages() and we can
>>>> leave the remaining part as it is.
>>>>
>>>> Saying that n_out < n_pages tells us the buffer is full covers one case.
>>>> But there is case of maximum pages have been found and walk needs to be
>>>> aborted.
>>>
>>> This case is exactly what `n_out < n_pages` will cover (if scan_output
>>> uses max_pages properly to limit n_out).
>>> Isn't it that when the buffer is full we want to abort the scan always
>>> (with WP if `n_out > 0`)?
>> Wouldn't it be duplication of condition if buffer is full inside
>> pagemap_scan_output() and just outside it. Inside pagemap_scan_output() we
>> check if we have space before putting data inside it. I'm using this same
>> condition to indicate that buffer is full.
> 
> I'm not sure what do you mean? The buffer-full conditions would be
> checked in ..scan_output() and communicated to the caller by returning
> N less than `n_pages` passed in. This is exactly how e.g. read()
> works: if you get less than requested you've hit the end of the file.
> If the file happens to have size that is equal to the provided buffer
> length, the next read() will return 0.
Right now we have:

pagemap_scan_output():
	if (p->vec_buf_index >= p->vec_buf_len)
		return PM_SCAN_BUFFER_FULL;
	if (p->found_pages == p->max_pages)
		return PM_SCAN_FOUND_MAX_PAGES;

pagemap_scan_pmd_entry():
	ret = pagemap_scan_output(bitmap, p, start, n_pages);
	if (ret >= 0) // success
		make_UFFD_WP and flush
	else
		buffer_error

You are asking me to do:

pagemap_scan_output():
	if (p->vec_buf_index >= p->vec_buf_len)
		return 0;
	if (p->found_pages == p->max_pages)
		return PM_SCAN_FOUND_MAX_PAGES;

pagemap_scan_pmd_entry():
	ret = pagemap_scan_output(bitmap, p, start, n_pages);
	if (ret > 0) // success
		make_UFFD_WP and flush
	else if (ret == 0) // buffer full
		return PM_SCAN_BUFFER_FULL;	
	else //other errors
		buffer_error

So you are asking me to go from consie code to write more lines of code. I
would write more lines without any issue if it improves readability and
logical sense. But I don't see here any benefit.

> 
>>>>>>> While here, I wonder if we really need to fail the call if there are
>>>>>>> unknown bits in those masks set: if this bit set is expanded with
>>>>>>> another category flags, a newer userspace run on older kernel would
>>>>>>> get EINVAL even if the "treat unknown as 0" be what it requires.
>>>>>>> There is no simple way in the API to discover what bits the kernel
>>>>>>> supports. We could allow a no-op (no WP nor GET) call to help with
>>>>>>> that and then rejecting unknown bits would make sense.
>>>>>> I've not seen any examples of this. But I've seen examples of returning
>>>>>> error if kernel doesn't support a feature. Each new feature comes with a
>>>>>> kernel version, greater than this version support this feature. If user is
>>>>>> trying to use advanced feature which isn't present in a kernel, we should
>>>>>> return error and not proceed to confuse the user/kernel. In fact if we look
>>>>>> at userfaultfd_api(), we return error immediately if feature has some bit
>>>>>> set which kernel doesn't support.
>>>>>
>>>>> I think we should have a way of detecting the supported flags if we
>>>>> don't want a forward compatibility policy for flags here. Maybe it
>>>>> would be enough to allow all the no-op combinations for this purpose?
>>>> Again I don't think UFFD is doing anything like this.
>>>
>>> If it's cheap and easy to provide a user with a way to detect the
>>> supported features - why not do it?
>> I'm sorry. But it would bring up something new and iterations will be
>> needed to just play around. I like the UFFD way.
> 
> Let's then first agree on what would have to be changed. I guess we
> could leverage that `scan_len = 0` doesn't make much sense otherwise
> and let it be used to check the other fields for support.
We are making things more and more complex. I don't like multi-plexing
variables. Can you give examples where multi-plexing has been done on
variables inside linux kernel? Muti-plexing means user gives input and
takes output from same variable. It makes variable double meaning.

> 
> Best Regards
> Michał Mirosław

-- 
BR,
Muhammad Usama Anjum




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux