splice_direct_to_actor() doesn't manage SPLICE_F_MORE correctly[1] - and,
as a result, it incorrectly signals/fails to signal MSG_MORE when splicing
to a socket. The problem I'm seeing happens when a short splice occurs
because we got a short read due to hitting the EOF on a file: as the length
read (read_len) is less than the remaining size to be spliced (len),
SPLICE_F_MORE (and thus MSG_MORE) is set.
The issue is that, for the moment, we have no way to know *why* the short
read occurred and so can't make a good decision on whether we *should* keep
MSG_MORE set. Further, the argument can be made that it should be left to
userspace to decide how to handle it - userspace could perform some sort of
cancellation for example.
MSG_SENDPAGE_NOTLAST was added to work around this, but that is also set
incorrectly under some circumstances - for example if a short read fills a
single pipe_buffer, but the next read would return more (seqfile can do
this).
This was observed with the multi_chunk_sendfile tests in the tls kselftest
program. Some of those tests would hang and time out when the last chunk
of file was less than the sendfile request size:
build/kselftest/net/tls -r tls.12_aes_gcm.multi_chunk_sendfile
This has been observed before[2] and worked around in AF_TLS[3].
Fix this by making splice_direct_to_actor() always signal SPLICE_F_MORE if
we haven't yet hit the requested operation size. SPLICE_F_MORE remains
signalled if the user passed it in to splice() but otherwise gets cleared
when we've read sufficient data to fulfill the request. The cleanup of a
short splice to userspace is left to userspace.
[!] Note that this changes user-visible behaviour. It will cause the
multi_chunk_sendfile tests in the TLS kselftest to fail. This failure
in the testsuite will be addressed in a subsequent patch by making
userspace do a zero-length send().
It appears that SPLICE_F_MORE is only used by splice-to-socket.
Signed-off-by: David Howells <dhowells@xxxxxxxxxx>
cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
cc: Jakub Kicinski <kuba@xxxxxxxxxx>
cc: Jens Axboe <axboe@xxxxxxxxx>
cc: Christoph Hellwig <hch@xxxxxx>
cc: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
cc: Matthew Wilcox <willy@xxxxxxxxxxxxx>
cc: Jan Kara <jack@xxxxxxx>
cc: Jeff Layton <jlayton@xxxxxxxxxx>
cc: David Hildenbrand <david@xxxxxxxxxx>
cc: Christian Brauner <brauner@xxxxxxxxxx>
cc: Chuck Lever <chuck.lever@xxxxxxxxxx>
cc: Boris Pismenny <borisp@xxxxxxxxxx>
cc: John Fastabend <john.fastabend@xxxxxxxxx>
cc: Eric Dumazet <edumazet@xxxxxxxxxx>
cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
cc: Paolo Abeni <pabeni@xxxxxxxxxx>
cc: linux-fsdevel@xxxxxxxxxxxxxxx
cc: linux-block@xxxxxxxxxxxxxxx
cc: linux-mm@xxxxxxxxx
cc: netdev@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/499791.1685485603@xxxxxxxxxxxxxxxxxxxxxx/ [1]
Link: https://lore.kernel.org/r/1591392508-14592-1-git-send-email-pooja.trivedi@xxxxxxxxxxxxx/ [2]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=d452d48b9f8b1a7f8152d33ef52cfd7fe1735b0a [3]
---
fs/splice.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/fs/splice.c b/fs/splice.c
index 9b1d43c0c562..c71bd8e03469 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1052,13 +1052,17 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd,
*/
bytes = 0;
len = sd->total_len;
+
+ /* Don't block on output, we have to drain the direct pipe. */
flags = sd->flags;
+ sd->flags &= ~SPLICE_F_NONBLOCK;
/*
- * Don't block on output, we have to drain the direct pipe.
+ * We signal MORE until we've read sufficient data to fulfill the
+ * request and we keep signalling it if the caller set it.
*/
- sd->flags &= ~SPLICE_F_NONBLOCK;
more = sd->flags & SPLICE_F_MORE;
+ sd->flags |= SPLICE_F_MORE;
WARN_ON_ONCE(!pipe_empty(pipe->head, pipe->tail));
@@ -1074,14 +1078,12 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd,
sd->total_len = read_len;
/*
- * If more data is pending, set SPLICE_F_MORE
- * If this is the last data and SPLICE_F_MORE was not set
- * initially, clears it.
+ * If we now have sufficient data to fulfill the request then
+ * we clear SPLICE_F_MORE if it was not set initially.
*/
- if (read_len < len)
- sd->flags |= SPLICE_F_MORE;
- else if (!more)
+ if (read_len >= len && !more)
sd->flags &= ~SPLICE_F_MORE;
+
/*
* NOTE: nonblocking mode only applies to the input. We
* must not do the output in nonblocking mode as then we
