Re: [PATCH v2 5/5] kasan: suppress recursive reports for HW_TAGS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 29 Mar 2023 at 20:38, <andrey.konovalov@xxxxxxxxx> wrote:
>
> From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
>
> KASAN suppresses reports for bad accesses done by the KASAN reporting
> code. The reporting code might access poisoned memory for reporting
> purposes.
>
> Software KASAN modes do this by suppressing reports during reporting
> via current->kasan_depth, the same way they suppress reports during
> accesses to poisoned slab metadata.
>
> Hardware Tag-Based KASAN does not use current->kasan_depth, and instead
> resets pointer tags for accesses to poisoned memory done by the reporting
> code.
>
> Despite that, a recursive report can still happen:
>
> 1. On hardware with faulty MTE support. This was observed by Weizhao
>    Ouyang on a faulty hardware that caused memory tags to randomly change
>    from time to time.
>
> 2. Theoretically, due to a previous MTE-undetected memory corruption.
>
> A recursive report can happen via:
>
> 1. Accessing a pointer with a non-reset tag in the reporting code, e.g.
>    slab->slab_cache, which is what Weizhao Ouyang observed.
>
> 2. Theoretically, via external non-annotated routines, e.g. stackdepot.
>
> To resolve this issue, resetting tags for all of the pointers in the
> reporting code and all the used external routines would be impractical.
>
> Instead, disable tag checking done by the CPU for the duration of KASAN
> reporting for Hardware Tag-Based KASAN.
>
> Without this fix, Hardware Tag-Based KASAN reporting code might deadlock.
>
> Fixes: 2e903b914797 ("kasan, arm64: implement HW_TAGS runtime")
> Reported-by: Weizhao Ouyang <ouyangweizhao@xxxxxxxx>
> Signed-off-by: Andrey Konovalov <andreyknvl@xxxxxxxxxx>

Reviewed-by: Marco Elver <elver@xxxxxxxxxx>

> ---
>
> Considering that 1. the bug this patch fixes was only observed on faulty
> MTE hardware, and 2. the patch depends on the other patches in this series,
> I don't think it's worth backporting it into stable.

Given the Fixes above, it's likely this may or may not still end up in stable.

> Changes v1->v2:
> - Disable preemption instead of migration.
> - Fix comment typo.
> ---
>  mm/kasan/report.c | 59 ++++++++++++++++++++++++++++++++++++++---------
>  1 file changed, 48 insertions(+), 11 deletions(-)
>
> diff --git a/mm/kasan/report.c b/mm/kasan/report.c
> index 89078f912827..892a9dc9d4d3 100644
> --- a/mm/kasan/report.c
> +++ b/mm/kasan/report.c
> @@ -72,10 +72,18 @@ static int __init kasan_set_multi_shot(char *str)
>  __setup("kasan_multi_shot", kasan_set_multi_shot);
>
>  /*
> - * Used to suppress reports within kasan_disable/enable_current() critical
> - * sections, which are used for marking accesses to slab metadata.
> + * This function is used to check whether KASAN reports are suppressed for
> + * software KASAN modes via kasan_disable/enable_current() critical sections.
> + *
> + * This is done to avoid:
> + * 1. False-positive reports when accessing slab metadata,
> + * 2. Deadlocking when poisoned memory is accessed by the reporting code.
> + *
> + * Hardware Tag-Based KASAN instead relies on:
> + * For #1: Resetting tags via kasan_reset_tag().
> + * For #2: Suppression of tag checks via CPU, see report_suppress_start/end().
>   */
> -static bool report_suppressed(void)
> +static bool report_suppressed_sw(void)
>  {
>  #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
>         if (current->kasan_depth)
> @@ -84,6 +92,30 @@ static bool report_suppressed(void)
>         return false;
>  }
>
> +static void report_suppress_start(void)
> +{
> +#ifdef CONFIG_KASAN_HW_TAGS
> +       /*
> +        * Disable preemption for the duration of printing a KASAN report, as
> +        * hw_suppress_tag_checks_start() disables checks on the current CPU.
> +        */
> +       preempt_disable();
> +       hw_suppress_tag_checks_start();
> +#else
> +       kasan_disable_current();
> +#endif
> +}
> +
> +static void report_suppress_stop(void)
> +{
> +#ifdef CONFIG_KASAN_HW_TAGS
> +       hw_suppress_tag_checks_stop();
> +       preempt_enable();
> +#else
> +       kasan_enable_current();
> +#endif
> +}
> +
>  /*
>   * Used to avoid reporting more than one KASAN bug unless kasan_multi_shot
>   * is enabled. Note that KASAN tests effectively enable kasan_multi_shot
> @@ -174,7 +206,7 @@ static void start_report(unsigned long *flags, bool sync)
>         /* Do not allow LOCKDEP mangling KASAN reports. */
>         lockdep_off();
>         /* Make sure we don't end up in loop. */
> -       kasan_disable_current();
> +       report_suppress_start();
>         spin_lock_irqsave(&report_lock, *flags);
>         pr_err("==================================================================\n");
>  }
> @@ -192,7 +224,7 @@ static void end_report(unsigned long *flags, void *addr)
>                 panic("kasan.fault=panic set ...\n");
>         add_taint(TAINT_BAD_PAGE, LOCKDEP_NOW_UNRELIABLE);
>         lockdep_on();
> -       kasan_enable_current();
> +       report_suppress_stop();
>  }
>
>  static void print_error_description(struct kasan_report_info *info)
> @@ -480,9 +512,13 @@ void kasan_report_invalid_free(void *ptr, unsigned long ip, enum kasan_report_ty
>         struct kasan_report_info info;
>
>         /*
> -        * Do not check report_suppressed(), as an invalid-free cannot be
> -        * caused by accessing slab metadata and thus should not be
> -        * suppressed by kasan_disable/enable_current() critical sections.
> +        * Do not check report_suppressed_sw(), as an invalid-free cannot be
> +        * caused by accessing poisoned memory and thus should not be suppressed
> +        * by kasan_disable/enable_current() critical sections.
> +        *
> +        * Note that for Hardware Tag-Based KASAN, kasan_report_invalid_free()
> +        * is triggered by explicit tag checks and not by the ones performed by
> +        * the CPU. Thus, reporting invalid-free is not suppressed as well.
>          */
>         if (unlikely(!report_enabled()))
>                 return;
> @@ -517,7 +553,7 @@ bool kasan_report(unsigned long addr, size_t size, bool is_write,
>         unsigned long irq_flags;
>         struct kasan_report_info info;
>
> -       if (unlikely(report_suppressed()) || unlikely(!report_enabled())) {
> +       if (unlikely(report_suppressed_sw()) || unlikely(!report_enabled())) {
>                 ret = false;
>                 goto out;
>         }
> @@ -549,8 +585,9 @@ void kasan_report_async(void)
>         unsigned long flags;
>
>         /*
> -        * Do not check report_suppressed(), as kasan_disable/enable_current()
> -        * critical sections do not affect Hardware Tag-Based KASAN.
> +        * Do not check report_suppressed_sw(), as
> +        * kasan_disable/enable_current() critical sections do not affect
> +        * Hardware Tag-Based KASAN.
>          */
>         if (unlikely(!report_enabled()))
>                 return;
> --
> 2.25.1
>




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux