Hi all,
This patch series aims to make slab shrink lockless.
1. Background
=============
On our servers, we often find the following system cpu hotspots:
52.22% [kernel] [k] down_read_trylock
19.60% [kernel] [k] up_read
8.86% [kernel] [k] shrink_slab
2.44% [kernel] [k] idr_find
1.25% [kernel] [k] count_shadow_nodes
1.18% [kernel] [k] shrink lruvec
0.71% [kernel] [k] mem_cgroup_iter
0.71% [kernel] [k] shrink_node
0.55% [kernel] [k] find_next_bit
And we used bpftrace to capture its calltrace as follows:
@[
down_read_trylock+1
shrink_slab+128
shrink_node+371
do_try_to_free_pages+232
try_to_free_pages+243
_alloc_pages_slowpath+771
_alloc_pages_nodemask+702
pagecache_get_page+255
filemap_fault+1361
ext4_filemap_fault+44
__do_fault+76
handle_mm_fault+3543
do_user_addr_fault+442
do_page_fault+48
page_fault+62
]: 1161690
@[
down_read_trylock+1
shrink_slab+128
shrink_node+371
balance_pgdat+690
kswapd+389
kthread+246
ret_from_fork+31
]: 8424884
@[
down_read_trylock+1
shrink_slab+128
shrink_node+371
do_try_to_free_pages+232
try_to_free_pages+243
__alloc_pages_slowpath+771
__alloc_pages_nodemask+702
__do_page_cache_readahead+244
filemap_fault+1674
ext4_filemap_fault+44
__do_fault+76
handle_mm_fault+3543
do_user_addr_fault+442
do_page_fault+48
page_fault+62
]: 20917631
We can see that down_read_trylock() of shrinker_rwsem is being called with
high frequency at that time. Because of the poor multicore scalability of atomic
operations, this can lead to a significant drop in IPC (instructions per cycle).
And more, the shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many filesystems mounted or
unmounted at the same time, slab shrink will be affected (down_read_trylock()
failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start of an overcommitted
node containing many starting containers after node crash (or many resuming
containers after reboot for kernel update). In these cases memory pressure is
huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned in [1]) and a writer
comes in (such as mount a fs), then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@xxxxxxxxxxxxx/
All the above cases can be solved by replacing the shrinker_rwsem trylocks with
SRCU.
2. Survey
=========
Before doing the code implementation, I found that there were many similar
submissions in the community:
a. Davidlohr Bueso submitted a patch in 2015.
Subject: [PATCH -next v2] mm: srcu-ify shrinkers
Link: https://lore.kernel.org/all/1437080113.3596.2.camel@xxxxxxxxxxxx/
Result: It was finally merged into the linux-next branch, but failed on arm
allnoconfig (without CONFIG_SRCU)
b. Tetsuo Handa submitted a patchset in 2017.
Subject: [PATCH 1/2] mm,vmscan: Kill global shrinker lock.
Link: https://lore.kernel.org/lkml/1510609063-3327-1-git-send-email-penguin-kernel@xxxxxxxxxxxxxxxxxxx/
Result: Finally chose to use the current simple way (break when
rwsem_is_contended()). And Christoph Hellwig suggested to using SRCU,
but SRCU was not unconditionally enabled at the time.
c. Kirill Tkhai submitted a patchset in 2018.
Subject: [PATCH RFC 00/10] Introduce lockless shrink_slab()
Link: https://lore.kernel.org/lkml/153365347929.19074.12509495712735843805.stgit@localhost.localdomain/
Result: At that time, SRCU was not unconditionally enabled, and there were
some objections to enabling SRCU. Later, because Kirill's focus was
moved to other things, this patchset was not continued to be updated.
d. Sultan Alsawaf submitted a patch in 2021.
Subject: [PATCH] mm: vmscan: Replace shrinker_rwsem trylocks with SRCU protection
Link: https://lore.kernel.org/lkml/20210927074823.5825-1-sultan@xxxxxxxxxxxxxxx/
Result: Rejected because SRCU was not unconditionally enabled.
We can find that almost all these historical commits were abandoned because SRCU
was not unconditionally enabled. But now SRCU has been unconditionally enable
by Paul E. McKenney in 2023 [2], so it's time to replace shrinker_rwsem trylocks
with SRCU.
[2] https://lore.kernel.org/lkml/20230105003759.GA1769545@paulmck-ThinkPad-P17-Gen-1/
3. Reproduction and testing
===========================
We can reproduce the down_read_trylock() hotspot through the following script:
```
#!/bin/bash
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
mkdir -p /sys/fs/cgroup/perf_event/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
echo $$ > /sys/fs/cgroup/perf_event/test/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
echo $$ > /sys/fs/cgroup/perf_event/test/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands. Then we can use the
following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
32.31% [kernel] [k] down_read_trylock
19.40% [kernel] [k] pv_native_safe_halt
16.24% [kernel] [k] up_read
15.70% [kernel] [k] shrink_slab
4.69% [kernel] [k] _find_next_bit
2.62% [kernel] [k] shrink_node
1.78% [kernel] [k] shrink_lruvec
0.76% [kernel] [k] do_shrink_slab
2) After applying this patchset:
27.83% [kernel] [k] _find_next_bit
16.97% [kernel] [k] shrink_slab
15.82% [kernel] [k] pv_native_safe_halt
9.58% [kernel] [k] shrink_node
8.31% [kernel] [k] shrink_lruvec
5.64% [kernel] [k] do_shrink_slab
3.88% [kernel] [k] mem_cgroup_iter
At the same time, we use the following perf command to capture IPC information:
perf stat -e cycles,instructions -G test -a --repeat 5 -- sleep 10
1) Before applying this patchset:
Performance counter stats for 'system wide' (5 runs):
454187219766 cycles test ( +- 1.84% )
78896433101 instructions test # 0.17 insn per cycle ( +- 0.44% )
10.0020430 +- 0.0000366 seconds time elapsed ( +- 0.00% )
2) After applying this patchset:
Performance counter stats for 'system wide' (5 runs):
841954709443 cycles test ( +- 15.80% ) (98.69%)
527258677936 instructions test # 0.63 insn per cycle ( +- 15.11% ) (98.68%)
10.01064 +- 0.00831 seconds time elapsed ( +- 0.08% )
We can see that IPC drops very seriously when calling down_read_trylock() at
high frequency. After using SRCU, the IPC is at a normal level.
This series is based on next-20230306.
Comments and suggestions are welcome.
Thanks,
Qi.
Changelog in v4 -> v5:
- clean up [PATCH v4 1/8] (per Kirill)
- include linux/srcu.h in [PATCH v4 2/8] and [PATCH v4 5/8] (per Vlastimil)
- fix typo in the commit message of [PATCH v4 4/8] (per Vlastimil)
- add more explanation to the commit message of [PATCH v4 7/8]
- collect Acked-bys
Changelog in v3 -> v4:
- fix bug in [PATCH v3 1/7]
- revise commit messages
- rebase onto the next-20230306
Changelog in v2 -> v3:
- fix bug in [PATCH v2 1/7] (per Kirill)
- add Kirill's pacth which restore a check similar to the rwsem_is_contendent()
check by adding shrinker_srcu_generation
Changelog in v1 -> v2:
- add a map_nr_max field to shrinker_info (suggested by Kirill)
- use shrinker_mutex in reparent_shrinker_deferred() (pointed by Kirill)
Kirill Tkhai (1):
mm: vmscan: add shrinker_srcu_generation
Qi Zheng (7):
mm: vmscan: add a map_nr_max field to shrinker_info
mm: vmscan: make global slab shrink lockless
mm: vmscan: make memcg slab shrink lockless
mm: shrinkers: make count and scan in shrinker debugfs lockless
mm: vmscan: hold write lock to reparent shrinker nr_deferred
mm: vmscan: remove shrinker_rwsem from synchronize_shrinkers()
mm: shrinkers: convert shrinker_rwsem to mutex
drivers/md/dm-cache-metadata.c | 2 +-
drivers/md/dm-thin-metadata.c | 2 +-
fs/super.c | 2 +-
include/linux/memcontrol.h | 1 +
mm/shrinker_debug.c | 39 ++++----
mm/vmscan.c | 160 ++++++++++++++++++---------------
6 files changed, 107 insertions(+), 99 deletions(-)
--
2.20.1
