Re: [PATCH] mm/ksm: Fix race with ksm_exit() in VMA iteration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08.03.23 17:19, Liam R. Howlett wrote:
* David Hildenbrand <david@xxxxxxxxxx> [230308 04:41]:
On 07.03.23 21:59, Liam R. Howlett wrote:
ksm_exit() may remove the mm from the ksm_scan between the unlocking of
the ksm_mmlist and the start of the VMA iteration.  This results in the
mmap_read_lock() not being taken and a report from lockdep that the mm
isn't locked in the maple tree code.

I'm confused.

Thanks for looking at this.  My explanation is incorrect.


Heh, so that explains my confusion :)

The code does

mmap_read_lock(mm);
...
for_each_vma(vmi, vma) {
mmap_read_unlock(mm);

How can we not take the mmap_read_lock() ? Or am I staring at the wrong
mmap_read_lock() ?

That's the right one.  The mmap lock is taken, but the one we are
checking is not the correct one.  Let me try again.

Checking the mm struct against the one in the vmi confirms they are the
same, so lockdep is telling us the lock we took doesn't match what it
expected.  I verified that the lock is the same before the
'for_each_vma()' call by inserting a BUG_ON() which is never triggered
with the reproducer.

ksm_test_exit() uses the mm->mm_users atomic to detect an mm exit.  This
is usually done in mmget(), mmput(), and friends.

__ksm_exit() and unmerge_and_remove_all_rmap_items() handle freeing by
use of the mm->mm_count atomic. This is usually via mmgrab() and mmdrop().

mmput() will call __mmput() if mm_users is decremented to zero.
__mmput() calls mmdrop() after the ksm_exit() and then continue with
teardown.

So, I believe what is happening is that the external lock flag is being
cleared from the maple tree (the one lockdep checks) before we call the
iterator.


Thanks for the explanation.

So, IIUC, we are really only fixing a lockdep issue, assuming that the maple tree cleanup code leaves the maple tree in a state where an iterator essentially exits right away. Further, I assume this wasn't a problem before the maple tree: there would simply be no VMAs to iterate.

task 1					task 2
unmerge_and_remove_all_rmap_items()
  spin_lock(&ksm_mmlist_lock);
  ksm_scan.mm_slot is set
  spin_unlock(&ksm_mmlist_lock);

=======================================================================
	At this point mm->mm_users is 0, but mm_count is not as it will
	be decremented at the end of __mmput().
=======================================================================

					__mmput()
  					 ksm_exit()
					  __ksm_exit()
					   spin_lock(&ksm_mmlist_lock);
					   mm_slot is set
					   spin_unlock(&ksm_mmlist_lock)
					   mm_slot == ksm_scan.mm_slot
					   mmap_write_lock();
					   mmap_write_unlock();
					   return
					 exit_mmap()
					   ...
					   mmap_write_lock();
					   __mt_destory()
					     Free all maple tree nodes
					     mt->flags = 0;
					   mmap_write_unlock();
					   ...

  mmap_read_lock()
  for_each_vma()
    lockdep checks *internal* spinlock


This was fine before the change as the previous for loop would not have
checked the locking and would have hit the ksm_test_exit() test before
any problem arose.

Now we are getting a lockdep warning because the maple tree flag for the
external lock is cleared.

How about this as the start to the commit message:

The VMA iterator may trigger a lockdep warning if the mm is in the
process of being cleaned up before obtaining the mmap_read_lock().

Maybe something like the following (matches my understanding, as an inspiration):

"
exit_mmap() will tear down the VMAs (maple tree) with the mmap_lock held in write mode. Once we take the mmap_lock in read mode in unmerge_and_remove_all_rmap_items(), we are protected against such concurrent teardown, however, the teardown might already have happened just the way KSM slot registration machinery works.

Without the VMA iterator, we didn't care. But with the VMA iterator, lockdep will now complain when stumbling over a the destroyed maple tree.

Let's check for the teardown by relying on ksm_test_exit() earlier, before working on a torn down maple tree.
"




Fix the race by checking if this mm has been removed before iterating
the VMAs. __ksm_exit() uses the mmap lock to synchronize the freeing of
an mm, so it is safe to keep iterating over the VMAs when it is going to
be freed.

This change will slow down the mm exit during the race condition, but
will speed up the non-race scenarios iteration over the VMA list, which
should be much more common.

Would leaving the existing check in help to just stop scanning faster in
that case?

Yes.  But why?  We would stop the scanning faster in the race condition
case, but slow the normal case down.

This check was here to ensure that the mm isn't being torn down while
it's iterating over the loop.  Hugh (Cc'ed) added this in 2009, but the
fundamental problem he specifies in his commit message in 9ba692948008
("ksm: fix oom deadlock") is that exit_mmap() does not take the
mmap_lock() - which is no longer the case.  We are safe to iterate the
VMAs with the mmap_read_lock() as the mmap_write_lock() is taken during
tear down of the VMA tree today.


Right. I just spotted that we have a ksm_test_exit() already in unmerge_ksm_pages(), so that should be sufficient to make us stop scanning in case ksm_exit() is waiting for the mmap lock.


Adding a comment summarizing why that's required before iterating would be nice. Like

/* Exit right away if the maple tree might have been torn down. */


With a better description, feel free to add

Acked-by: David Hildenbrand <david@xxxxxxxxxx>

--
Thanks,

David / dhildenb





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux