Re: [PATCH RFC v2 bpf-next 7/9] selftests/bpf: Replace extract_build_id with read_build_id

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 07, 2023 at 05:26:32PM -0800, Andrii Nakryiko wrote:
> On Tue, Feb 28, 2023 at 1:33 AM Jiri Olsa <jolsa@xxxxxxxxxx> wrote:
> >
> > Replacing extract_build_id with read_build_id that parses out
> > build id directly from elf without using readelf tool.
> >
> > Signed-off-by: Jiri Olsa <jolsa@xxxxxxxxxx>
> > ---
> 
> small nit below, but looks good. Thanks for clean up!
> 
> Acked-by: Andrii Nakryiko <andrii@xxxxxxxxxx>
> 
> >  .../bpf/prog_tests/stacktrace_build_id.c      | 19 ++++++--------
> >  .../bpf/prog_tests/stacktrace_build_id_nmi.c  | 17 +++++--------
> >  tools/testing/selftests/bpf/test_progs.c      | 25 -------------------
> >  tools/testing/selftests/bpf/test_progs.h      |  1 -
> >  4 files changed, 13 insertions(+), 49 deletions(-)
> >
> > diff --git a/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id.c b/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id.c
> > index 9ad09a6c538a..9e4b76ee356f 100644
> > --- a/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id.c
> > +++ b/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id.c
> > @@ -7,13 +7,12 @@ void test_stacktrace_build_id(void)
> >
> >         int control_map_fd, stackid_hmap_fd, stackmap_fd, stack_amap_fd;
> >         struct test_stacktrace_build_id *skel;
> > -       int err, stack_trace_len;
> > +       int err, stack_trace_len, build_id_size;
> >         __u32 key, prev_key, val, duration = 0;
> > -       char buf[256];
> > -       int i, j;
> > +       char buf[BPF_BUILD_ID_SIZE];
> >         struct bpf_stack_build_id id_offs[PERF_MAX_STACK_DEPTH];
> >         int build_id_matches = 0;
> > -       int retry = 1;
> > +       int i, retry = 1;
> >
> >  retry:
> >         skel = test_stacktrace_build_id__open_and_load();
> > @@ -52,9 +51,10 @@ void test_stacktrace_build_id(void)
> >                   "err %d errno %d\n", err, errno))
> >                 goto cleanup;
> >
> > -       err = extract_build_id(buf, 256);
> > +       build_id_size = read_build_id("./urandom_read", buf);
> 
> nit: "urandom_read" vs "./urandom_read" matters only when executing
> binary, not when opening a file. So all these "./" just creates
> unnecessary confusion, IMO

right, I'll remove it also in the other test

thanks,
jirka

> 
> > +       err = build_id_size < 0 ? build_id_size : 0;
> >
> > -       if (CHECK(err, "get build_id with readelf",
> > +       if (CHECK(err, "read_build_id",
> >                   "err %d errno %d\n", err, errno))
> >                 goto cleanup;
> >
> > @@ -64,8 +64,6 @@ void test_stacktrace_build_id(void)
> >                 goto cleanup;
> >
> >         do {
> > -               char build_id[64];
> > -
> >                 err = bpf_map_lookup_elem(stackmap_fd, &key, id_offs);
> >                 if (CHECK(err, "lookup_elem from stackmap",
> >                           "err %d, errno %d\n", err, errno))
> > @@ -73,10 +71,7 @@ void test_stacktrace_build_id(void)
> >                 for (i = 0; i < PERF_MAX_STACK_DEPTH; ++i)
> >                         if (id_offs[i].status == BPF_STACK_BUILD_ID_VALID &&
> >                             id_offs[i].offset != 0) {
> > -                               for (j = 0; j < 20; ++j)
> > -                                       sprintf(build_id + 2 * j, "%02x",
> > -                                               id_offs[i].build_id[j] & 0xff);
> > -                               if (strstr(buf, build_id) != NULL)
> > +                               if (memcmp(buf, id_offs[i].build_id, build_id_size) == 0)
> >                                         build_id_matches = 1;
> >                         }
> >                 prev_key = key;
> > diff --git a/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c b/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c
> > index f4ea1a215ce4..8d84149ebcc7 100644
> > --- a/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c
> > +++ b/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c
> > @@ -28,11 +28,10 @@ void test_stacktrace_build_id_nmi(void)
> >                 .config = PERF_COUNT_HW_CPU_CYCLES,
> >         };
> >         __u32 key, prev_key, val, duration = 0;
> > -       char buf[256];
> > -       int i, j;
> > +       char buf[BPF_BUILD_ID_SIZE];
> >         struct bpf_stack_build_id id_offs[PERF_MAX_STACK_DEPTH];
> > -       int build_id_matches = 0;
> > -       int retry = 1;
> > +       int build_id_matches = 0, build_id_size;
> > +       int i, retry = 1;
> >
> >         attr.sample_freq = read_perf_max_sample_freq();
> >
> > @@ -94,7 +93,8 @@ void test_stacktrace_build_id_nmi(void)
> >                   "err %d errno %d\n", err, errno))
> >                 goto cleanup;
> >
> > -       err = extract_build_id(buf, 256);
> > +       build_id_size = read_build_id("./urandom_read", buf);
> > +       err = build_id_size < 0 ? build_id_size : 0;
> >
> >         if (CHECK(err, "get build_id with readelf",
> >                   "err %d errno %d\n", err, errno))
> > @@ -106,8 +106,6 @@ void test_stacktrace_build_id_nmi(void)
> >                 goto cleanup;
> >
> >         do {
> > -               char build_id[64];
> > -
> >                 err = bpf_map__lookup_elem(skel->maps.stackmap, &key, sizeof(key),
> >                                            id_offs, sizeof(id_offs), 0);
> >                 if (CHECK(err, "lookup_elem from stackmap",
> > @@ -116,10 +114,7 @@ void test_stacktrace_build_id_nmi(void)
> >                 for (i = 0; i < PERF_MAX_STACK_DEPTH; ++i)
> >                         if (id_offs[i].status == BPF_STACK_BUILD_ID_VALID &&
> >                             id_offs[i].offset != 0) {
> > -                               for (j = 0; j < 20; ++j)
> > -                                       sprintf(build_id + 2 * j, "%02x",
> > -                                               id_offs[i].build_id[j] & 0xff);
> > -                               if (strstr(buf, build_id) != NULL)
> > +                               if (memcmp(buf, id_offs[i].build_id, build_id_size) == 0)
> >                                         build_id_matches = 1;
> >                         }
> >                 prev_key = key;
> > diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
> > index 6d5e3022c75f..9813d53c4878 100644
> > --- a/tools/testing/selftests/bpf/test_progs.c
> > +++ b/tools/testing/selftests/bpf/test_progs.c
> > @@ -591,31 +591,6 @@ int compare_stack_ips(int smap_fd, int amap_fd, int stack_trace_len)
> >         return err;
> >  }
> >
> > -int extract_build_id(char *build_id, size_t size)
> > -{
> > -       FILE *fp;
> > -       char *line = NULL;
> > -       size_t len = 0;
> > -
> > -       fp = popen("readelf -n ./urandom_read | grep 'Build ID'", "r");
> > -       if (fp == NULL)
> > -               return -1;
> > -
> > -       if (getline(&line, &len, fp) == -1)
> > -               goto err;
> > -       pclose(fp);
> > -
> > -       if (len > size)
> > -               len = size;
> > -       memcpy(build_id, line, len);
> > -       build_id[len] = '\0';
> > -       free(line);
> > -       return 0;
> > -err:
> > -       pclose(fp);
> > -       return -1;
> > -}
> > -
> >  static int finit_module(int fd, const char *param_values, int flags)
> >  {
> >         return syscall(__NR_finit_module, fd, param_values, flags);
> > diff --git a/tools/testing/selftests/bpf/test_progs.h b/tools/testing/selftests/bpf/test_progs.h
> > index 9fbdc57c5b57..3825c2797a4b 100644
> > --- a/tools/testing/selftests/bpf/test_progs.h
> > +++ b/tools/testing/selftests/bpf/test_progs.h
> > @@ -404,7 +404,6 @@ static inline void *u64_to_ptr(__u64 ptr)
> >  int bpf_find_map(const char *test, struct bpf_object *obj, const char *name);
> >  int compare_map_keys(int map1_fd, int map2_fd);
> >  int compare_stack_ips(int smap_fd, int amap_fd, int stack_trace_len);
> > -int extract_build_id(char *build_id, size_t size);
> >  int kern_sync_rcu(void);
> >  int trigger_module_test_read(int read_sz);
> >  int trigger_module_test_write(int write_sz);
> > --
> > 2.39.2
> >




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux