Re: [PATCH v7 25/41] x86/mm: Introduce MAP_ABOVE4G

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 27, 2023 at 02:29:41PM -0800, Rick Edgecombe wrote:
> The x86 Control-flow Enforcement Technology (CET) feature includes a new
> type of memory called shadow stack. This shadow stack memory has some
> unusual properties, which require some core mm changes to function
> properly.
> 
> One of the properties is that the shadow stack pointer (SSP), which is a
> CPU register that points to the shadow stack like the stack pointer points
> to the stack, can't be pointing outside of the 32 bit address space when
> the CPU is executing in 32 bit mode. It is desirable to prevent executing
> in 32 bit mode when shadow stack is enabled because the kernel can't easily
> support 32 bit signals.
> 
> On x86 it is possible to transition to 32 bit mode without any special
> interaction with the kernel, by doing a "far call" to a 32 bit segment.
> So the shadow stack implementation can use this address space behavior
> as a feature, by enforcing that shadow stack memory is always crated
								^^^^^^^

"created"

and I'd say "mapped" or "allocated" here. "Created" sounds weird.

> outside of the 32 bit address space. This way userspace will trigger a
> general protection fault which will in turn trigger a segfault if it
> tries to transition to 32 bit mode with shadow stack enabled.
> 
> This provides a clean error generating border for the user if they try
> attempt to do 32 bit mode shadow stack, rather than leave the kernel in a
> half working state for userspace to be surprised by.
> 
> So to allow future shadow stack enabling patches to map shadow stacks
> out of the 32 bit address space, introduce MAP_ABOVE4G. The behavior

I guess this needs to be documented in the mmap() manpage too.

> is pretty much like MAP_32BIT, except that it has the opposite address
> range. The are a few differences though.
> 
> If both MAP_32BIT and MAP_ABOVE4G are provided, the kernel will use the
> MAP_ABOVE4G behavior. Like MAP_32BIT, MAP_ABOVE4G is ignored in a 32 bit
> syscall.
> 
> Since the default search behavior is top down, the normal kaslr base can
> be used for MAP_ABOVE4G. This is unlike MAP_32BIT which has to add it's
								     ^^^^


"its"

> own randomization in the bottom up case.

...

> diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
> index 8cc653ffdccd..06378b5682c1 100644
> --- a/arch/x86/kernel/sys_x86_64.c
> +++ b/arch/x86/kernel/sys_x86_64.c
> @@ -193,7 +193,11 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
>  
>  	info.flags = VM_UNMAPPED_AREA_TOPDOWN;
>  	info.length = len;
> -	info.low_limit = PAGE_SIZE;
> +	if (!in_32bit_syscall() && (flags & MAP_ABOVE4G))
> +		info.low_limit = 0x100000000;

We have a human readable define for that: SZ_4G

> +	else
> +		info.low_limit = PAGE_SIZE;
> +
>  	info.high_limit = get_mmap_base(0);
>  
>  	/*

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux