Punit Agrawal <punit.agrawal@xxxxxxxxxxxxx> writes: > Suren Baghdasaryan <surenb@xxxxxxxxxx> writes: > >> Previous version: >> v1: https://lore.kernel.org/all/20230109205336.3665937-1-surenb@xxxxxxxxxx/ >> RFC: https://lore.kernel.org/all/20220901173516.702122-1-surenb@xxxxxxxxxx/ >> >> LWN article describing the feature: >> https://lwn.net/Articles/906852/ >> >> Per-vma locks idea that was discussed during SPF [1] discussion at LSF/MM >> last year [2], which concluded with suggestion that “a reader/writer >> semaphore could be put into the VMA itself; that would have the effect of >> using the VMA as a sort of range lock. There would still be contention at >> the VMA level, but it would be an improvement.” This patchset implements >> this suggested approach. > > I took the patches for a spin on a 2-socket 32 core (64 threads) system > with Intel 8336C (Ice Lake) and 512GB of RAM. > > For the initial testing, "pft-threads" from the mm-tests suite[0] was > used. The test mmaps a memory region (~100GB on the test system) and > triggers access by a number of threads executing in parallel. For each > degree of parallelism, the test is repeated 10 times to get a better > feel for the behaviour. Below is an excerpt of the harmonic mean > reported by 'compare_kernel' script[1] included with mm-tests. > > The first column is results for mm-unstable as of 2023-02-10, the second > column is the patches posted here while the third column includes > optimizations to reclaim some of the observed regression. > > From the results, there is a drop in page fault/second for low number of > CPUs but good improvement with higher CPUs. > > 6.2.0-rc4 6.2.0-rc4 6.2.0-rc4 > mm-unstable-20230210 pvl-v2 pvl-v2+opt > > Hmean faults/cpu-1 898792.9338 ( 0.00%) 894597.0474 * -0.47%* 895933.2782 * -0.32%* > Hmean faults/cpu-4 751903.9803 ( 0.00%) 677764.2975 * -9.86%* 688643.8163 * -8.41%* > Hmean faults/cpu-7 612275.5663 ( 0.00%) 565363.4137 * -7.66%* 597538.9396 * -2.41%* > Hmean faults/cpu-12 434460.9074 ( 0.00%) 410974.2708 * -5.41%* 452501.4290 * 4.15%* > Hmean faults/cpu-21 291475.5165 ( 0.00%) 293936.8460 ( 0.84%) 308712.2434 * 5.91%* > Hmean faults/cpu-30 218021.3980 ( 0.00%) 228265.0559 * 4.70%* 241897.5225 * 10.95%* > Hmean faults/cpu-48 141798.5030 ( 0.00%) 162322.5972 * 14.47%* 166081.9459 * 17.13%* > Hmean faults/cpu-79 90060.9577 ( 0.00%) 107028.7779 * 18.84%* 109810.4488 * 21.93%* > Hmean faults/cpu-110 64729.3561 ( 0.00%) 80597.7246 * 24.51%* 83134.0679 * 28.43%* > Hmean faults/cpu-128 55740.1334 ( 0.00%) 68395.4426 * 22.70%* 69248.2836 * 24.23%* > > Hmean faults/sec-1 898781.7694 ( 0.00%) 894247.3174 * -0.50%* 894440.3118 * -0.48%* > Hmean faults/sec-4 2965588.9697 ( 0.00%) 2683651.5664 * -9.51%* 2726450.9710 * -8.06%* > Hmean faults/sec-7 4144512.3996 ( 0.00%) 3891644.2128 * -6.10%* 4099918.8601 ( -1.08%) > Hmean faults/sec-12 4969513.6934 ( 0.00%) 4829731.4355 * -2.81%* 5264682.7371 * 5.94%* > Hmean faults/sec-21 5814379.4789 ( 0.00%) 5941405.3116 * 2.18%* 6263716.3903 * 7.73%* > Hmean faults/sec-30 6153685.3709 ( 0.00%) 6489311.6634 * 5.45%* 6910843.5858 * 12.30%* > Hmean faults/sec-48 6197953.1327 ( 0.00%) 7216320.7727 * 16.43%* 7412782.2927 * 19.60%* > Hmean faults/sec-79 6167135.3738 ( 0.00%) 7425927.1022 * 20.41%* 7637042.2198 * 23.83%* > Hmean faults/sec-110 6264768.2247 ( 0.00%) 7813329.3863 * 24.72%* 7984344.4005 * 27.45%* > Hmean faults/sec-128 6460727.8216 ( 0.00%) 7875664.8999 * 21.90%* 8049910.3601 * 24.60%* The above workload represent the worst case with regards to per-VMA locks as it creates a single large VMA. As a follow-up, I modified pft[2] to create a VMA per thread to understand the behaviour in scenarios where per-VMA locks should show the most benefit. 6.2.0-rc4 6.2.0-rc4 6.2.0-rc4 mm-unstable-20230210 pvl-v2 pvl-v2+opt Hmean faults/cpu-1 905497.4354 ( 0.00%) 888736.5570 * -1.85%* 888695.2675 * -1.86%* Hmean faults/cpu-4 758519.2719 ( 0.00%) 812103.1991 * 7.06%* 825077.9277 * 8.77%* Hmean faults/cpu-7 617153.8038 ( 0.00%) 729943.4518 * 18.28%* 770872.3161 * 24.91%* Hmean faults/cpu-12 424848.5266 ( 0.00%) 550357.2856 * 29.54%* 597478.5634 * 40.63%* Hmean faults/cpu-21 290142.9988 ( 0.00%) 383668.3190 * 32.23%* 433376.8959 * 49.37%* Hmean faults/cpu-30 218705.2915 ( 0.00%) 299888.5533 * 37.12%* 342640.6153 * 56.67%* Hmean faults/cpu-48 142842.3372 ( 0.00%) 206498.2605 * 44.56%* 240306.3442 * 68.23%* Hmean faults/cpu-79 90706.1425 ( 0.00%) 160006.6800 * 76.40%* 185298.4326 * 104.28%* Hmean faults/cpu-110 67011.9297 ( 0.00%) 143536.0062 * 114.19%* 162688.8015 * 142.78%* Hmean faults/cpu-128 55986.4986 ( 0.00%) 136550.8760 * 143.90%* 152718.8713 * 172.78%* Hmean faults/sec-1 905492.1265 ( 0.00%) 887244.6592 * -2.02%* 887775.6079 * -1.96%* Hmean faults/sec-4 2994284.4204 ( 0.00%) 3154236.9408 * 5.34%* 3221994.8465 * 7.60%* Hmean faults/sec-7 4177411.3461 ( 0.00%) 4933286.4045 * 18.09%* 5202347.2077 * 24.54%* Hmean faults/sec-12 4892848.3633 ( 0.00%) 6054577.0988 * 23.74%* 6511987.1142 * 33.09%* Hmean faults/sec-21 5823534.1820 ( 0.00%) 7637637.4162 * 31.15%* 8553362.3513 * 46.88%* Hmean faults/sec-30 6247210.8414 ( 0.00%) 8598150.6717 * 37.63%* 9799696.0945 * 56.87%* Hmean faults/sec-48 6274617.1419 ( 0.00%) 9467132.3699 * 50.88%* 11049401.9072 * 76.10%* Hmean faults/sec-79 6187291.4971 ( 0.00%) 11919062.5284 * 92.64%* 13420825.3820 * 116.91%* Hmean faults/sec-110 6454542.3239 ( 0.00%) 15050228.1869 * 133.17%* 16667873.7618 * 158.23%* Hmean faults/sec-128 6472970.8548 ( 0.00%) 16647275.6575 * 157.18%* 18680029.3714 * 188.59%* As expected, the tests highlight the improved scalability as core count increases. > [0] https://github.com/gormanm/mmtests > [1] https://github.com/gormanm/mmtests/blob/master/compare-kernels.sh [2] https://github.com/gormanm/pft/pull/1/commits/8fe554a3d8b4f5947cd00d4b46f97178b8ba8752
