On Tue, Feb 14, 2023 at 10:28 AM Suren Baghdasaryan <surenb@xxxxxxxxxx> wrote:
>
> On Tue, Feb 14, 2023 at 10:13 AM Munehisa Kamata <kamatam@xxxxxxxxxx> wrote:
> >
> > If a non-root cgroup gets removed when there is a thread that registered
> > trigger and is polling on a pressure file within the cgroup, the polling
> > waitqueue gets freed in the following path.
> >
> > do_rmdir
> > cgroup_rmdir
> > kernfs_drain_open_files
> > cgroup_file_release
> > cgroup_pressure_release
> > psi_trigger_destroy
> >
> > However, the polling thread still has a reference to the pressure file and
> > will access the freed waitqueue when the file is closed or upon exit.
> >
> > fput
> > ep_eventpoll_release
> > ep_free
> > ep_remove_wait_queue
> > remove_wait_queue
> >
> > This results in use-after-free as pasted below.
> >
> > The fundamental problem here is that cgroup_file_release() (and
> > consequently waitqueue's lifetime) is not tied to the file's real lifetime.
> > Using wake_up_pollfree() here might be less than ideal, but it also is not
> > fully contradicting the comment at commit 42288cb44c4b ("wait: add
> > wake_up_pollfree()") since the waitqueue's lifetime is not tied to file's
> > one and can be considered as another special case. While this would be
> > fixable by somehow making cgroup_file_release() be tied to the fput(), it
> > would require sizable refactoring at cgroups or higher layer which might be
> > more justifiable if we identify more cases like this.
> >
> > BUG: KASAN: use-after-free in _raw_spin_lock_irqsave+0x60/0xc0
> > Write of size 4 at addr ffff88810e625328 by task a.out/4404
> >
> > CPU: 19 PID: 4404 Comm: a.out Not tainted 6.2.0-rc6 #38
> > Hardware name: Amazon EC2 c5a.8xlarge/, BIOS 1.0 10/16/2017
> > Call Trace:
> > <TASK>
> > dump_stack_lvl+0x73/0xa0
> > print_report+0x16c/0x4e0
> > ? _printk+0x59/0x80
> > ? __virt_addr_valid+0xb8/0x130
> > ? _raw_spin_lock_irqsave+0x60/0xc0
> > kasan_report+0xc3/0xf0
> > ? _raw_spin_lock_irqsave+0x60/0xc0
> > kasan_check_range+0x2d2/0x310
> > _raw_spin_lock_irqsave+0x60/0xc0
> > remove_wait_queue+0x1a/0xa0
> > ep_free+0x12c/0x170
> > ep_eventpoll_release+0x26/0x30
> > __fput+0x202/0x400
> > task_work_run+0x11d/0x170
> > do_exit+0x495/0x1130
> > ? update_cfs_rq_load_avg+0x2c2/0x2e0
> > do_group_exit+0x100/0x100
> > get_signal+0xd67/0xde0
> > ? finish_task_switch+0x15f/0x3a0
> > arch_do_signal_or_restart+0x2a/0x2b0
> > exit_to_user_mode_prepare+0x94/0x100
> > syscall_exit_to_user_mode+0x20/0x40
> > do_syscall_64+0x52/0x90
> > entry_SYSCALL_64_after_hwframe+0x63/0xcd
> > RIP: 0033:0x7f8e392bfb91
> > Code: Unable to access opcode bytes at 0x7f8e392bfb67.
> > RSP: 002b:00007fff261e08d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000022
> > RAX: fffffffffffffdfe RBX: 0000000000000000 RCX: 00007f8e392bfb91
> > RDX: 0000000000000001 RSI: 00007fff261e08e8 RDI: 0000000000000004
> > RBP: 00007fff261e0920 R08: 0000000000400780 R09: 00007f8e3960f240
> > R10: 00000000000003df R11: 0000000000000246 R12: 00000000004005a0
> > R13: 00007fff261e0a00 R14: 0000000000000000 R15: 0000000000000000
> > </TASK>
> >
> > Allocated by task 4404:
> > kasan_set_track+0x3d/0x60
> > __kasan_kmalloc+0x85/0x90
> > psi_trigger_create+0x113/0x3e0
> > pressure_write+0x146/0x2e0
> > cgroup_file_write+0x11c/0x250
> > kernfs_fop_write_iter+0x186/0x220
> > vfs_write+0x3d8/0x5c0
> > ksys_write+0x90/0x110
> > do_syscall_64+0x43/0x90
> > entry_SYSCALL_64_after_hwframe+0x63/0xcd
> >
> > Freed by task 4407:
> > kasan_set_track+0x3d/0x60
> > kasan_save_free_info+0x27/0x40
> > ____kasan_slab_free+0x11d/0x170
> > slab_free_freelist_hook+0x87/0x150
> > __kmem_cache_free+0xcb/0x180
> > psi_trigger_destroy+0x2e8/0x310
> > cgroup_file_release+0x4f/0xb0
> > kernfs_drain_open_files+0x165/0x1f0
> > kernfs_drain+0x162/0x1a0
> > __kernfs_remove+0x1fb/0x310
> > kernfs_remove_by_name_ns+0x95/0xe0
> > cgroup_addrm_files+0x67f/0x700
> > cgroup_destroy_locked+0x283/0x3c0
> > cgroup_rmdir+0x29/0x100
> > kernfs_iop_rmdir+0xd1/0x140
> > vfs_rmdir+0xfe/0x240
> > do_rmdir+0x13d/0x280
> > __x64_sys_rmdir+0x2c/0x30
> > do_syscall_64+0x43/0x90
> > entry_SYSCALL_64_after_hwframe+0x63/0xcd
> >
> > v3: updated commit message and the comment in the code
> > v2: updated commit message
> >
> > Link: https://lore.kernel.org/lkml/20230106224859.4123476-1-kamatam@xxxxxxxxxx/
> > Fixes: 0e94682b73bf ("psi: introduce psi monitor")
> > Cc: stable@xxxxxxxxxxxxxxx
> > Signed-off-by: Munehisa Kamata <kamatam@xxxxxxxxxx>
> > Signed-off-by: Mengchi Cheng <mengcc@xxxxxxxxxx>
>
Acked-by: Suren Baghdasaryan <surenb@xxxxxxxxxx>
CC'ing PeterZ directly for inclusion into his tree.
>
> > ---
> > kernel/sched/psi.c | 7 ++++---
> > 1 file changed, 4 insertions(+), 3 deletions(-)
> >
> > diff --git a/kernel/sched/psi.c b/kernel/sched/psi.c
> > index 8ac8b81bfee6..02e011cabe91 100644
> > --- a/kernel/sched/psi.c
> > +++ b/kernel/sched/psi.c
> > @@ -1343,10 +1343,11 @@ void psi_trigger_destroy(struct psi_trigger *t)
> >
> > group = t->group;
> > /*
> > - * Wakeup waiters to stop polling. Can happen if cgroup is deleted
> > - * from under a polling process.
> > + * Wakeup waiters to stop polling and clear the queue to prevent it from
> > + * being accessed later. Can happen if cgroup is deleted from under a
> > + * polling process.
> > */
> > - wake_up_interruptible(&t->event_wait);
> > + wake_up_pollfree(&t->event_wait);
> >
> > mutex_lock(&group->trigger_lock);
> >
> > --
> > 2.38.1
> >
