On Thursday 12 April 2012, Marek Szyprowski wrote:
> +
> > > +/*
> > > + * s5p_sysmmu_late_init
> > > + * Create DMA-mapping IOMMU context for specified devices. This function must
> > > + * be called later, once SYSMMU driver gets registered and probed.
> > > + */
> > > +static int __init s5p_sysmmu_late_init(void)
> > > +{
> > > + platform_set_sysmmu(&SYSMMU_PLATDEV(fimc0).dev,&s5p_device_fimc0.dev);
> > > + platform_set_sysmmu(&SYSMMU_PLATDEV(fimc1).dev,&s5p_device_fimc1.dev);
> > > + platform_set_sysmmu(&SYSMMU_PLATDEV(fimc2).dev,&s5p_device_fimc2.dev);
> > > + platform_set_sysmmu(&SYSMMU_PLATDEV(fimc3).dev,&s5p_device_fimc3.dev);
> > > + platform_set_sysmmu(&SYSMMU_PLATDEV(mfc_l).dev,&s5p_device_mfc_l.dev);
> > > + platform_set_sysmmu(&SYSMMU_PLATDEV(mfc_r).dev,&s5p_device_mfc_r.dev);
> > > +
> > > + s5p_create_iommu_mapping(&s5p_device_fimc0.dev, 0x20000000, SZ_128M, 4);
> > > + s5p_create_iommu_mapping(&s5p_device_fimc1.dev, 0x20000000, SZ_128M, 4);
> > > + s5p_create_iommu_mapping(&s5p_device_fimc2.dev, 0x20000000, SZ_128M, 4);
> > > + s5p_create_iommu_mapping(&s5p_device_fimc3.dev, 0x20000000, SZ_128M, 4);
> > > + s5p_create_iommu_mapping(&s5p_device_mfc_l.dev, 0x20000000, SZ_128M, 4);
> > > + s5p_create_iommu_mapping(&s5p_device_mfc_r.dev, 0x40000000, SZ_128M, 4);
> > > +
> > > + return 0;
> > > +}
> > > +device_initcall(s5p_sysmmu_late_init);
> >
> > Shouldn't these things be specific to a SoC? With this RFC, it happens
> > that you will predefine the IOMMU attachment and mapping information for
> > devices in common location (dev-sysmmu.c)? This may lead to problems
> > because there are some IP's with SYSMMU support in exynos5, but not
> > available in exynos4 (eg: GSC, FIMC-LITE, FIMC-ISP) Previously we used
> > to do above declaration in individual machine file, which I think was
> > more meaningful.
>
> Right, I simplified the code too much. Keeping these definitions inside machine
> files was a better idea. I completely forgot that Exynos sub-platform now covers
> both Exynos4 and Exynos5 SoC families.
Ideally the information about iommu attachment should come from the
device tree. We have the "dma-ranges" properties that define how a dma
address space is mapped. I am not entirely sure how that works when you
have multiple IOMMUs and if that requires defining addititional properties,
but I think we should make it so that we don't have to hardcode specific
devices in the source.
Arnd
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>