Re: [PATCH v4 3/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 01, 2023 at 05:13:35PM +0800, Baoquan He wrote:
> Currently, vread can read out vmalloc areas which is associated with
> a vm_struct. While this doesn't work for areas created by vm_map_ram()
> interface because it doesn't have an associated vm_struct. Then in vread(),
> these areas are all skipped.
>
> Here, add a new function vmap_ram_vread() to read out vm_map_ram areas.
> The area created with vmap_ram_vread() interface directly can be handled
> like the other normal vmap areas with aligned_vread(). While areas
> which will be further subdivided and managed with vmap_block need
> carefully read out page-aligned small regions and zero fill holes.
>
> Signed-off-by: Baoquan He <bhe@xxxxxxxxxx>
> ---
>  mm/vmalloc.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 80 insertions(+), 7 deletions(-)
>
> diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> index ab4825050b5c..5a3ea6cb7ec2 100644
> --- a/mm/vmalloc.c
> +++ b/mm/vmalloc.c
> @@ -3544,6 +3544,67 @@ static int aligned_vread(char *buf, char *addr, unsigned long count)
>  	return copied;
>  }
>
> +static void vmap_ram_vread(char *buf, char *addr, int count, unsigned long flags)
> +{
> +	char *start;
> +	struct vmap_block *vb;
> +	unsigned long offset;
> +	unsigned int rs, re, n;
> +
> +	/*
> +	 * If it's area created by vm_map_ram() interface directly, but
> +	 * not further subdividing and delegating management to vmap_block,
> +	 * handle it here.
> +	 */
> +	if (!(flags & VMAP_BLOCK)) {
> +		aligned_vread(buf, addr, count);
> +		return;
> +	}
> +
> +	/*
> +	 * Area is split into regions and tracked with vmap_block, read out
> +	 * each region and zero fill the hole between regions.
> +	 */
> +	vb = xa_load(&vmap_blocks, addr_to_vb_idx((unsigned long)addr));
> +	if (!vb)
> +		goto finished;
> +
> +	spin_lock(&vb->lock);
> +	if (bitmap_empty(vb->used_map, VMAP_BBMAP_BITS)) {
> +		spin_unlock(&vb->lock);
> +		goto finished;
> +	}
> +	for_each_set_bitrange(rs, re, vb->used_map, VMAP_BBMAP_BITS) {
> +		if (!count)
> +			break;
> +		start = vmap_block_vaddr(vb->va->va_start, rs);
> +		while (addr < start) {
> +			if (count == 0)
> +				break;

Bit pedantic, but you're using the `if (!count)` form of checking whether it's
zero above, but here you explicitly check it, would be good to keep both consistent.

Given you're checking here, perhaps you could simply drop the previous check?

> +			*buf = '\0';
> +			buf++;
> +			addr++;
> +			count--;
> +		}
> +		/*it could start reading from the middle of used region*/
> +		offset = offset_in_page(addr);
> +		n = ((re - rs + 1) << PAGE_SHIFT) - offset;
> +		if (n > count)
> +			n = count;
> +		aligned_vread(buf, start+offset, n);
> +
> +		buf += n;
> +		addr += n;
> +		count -= n;
> +	}
> +	spin_unlock(&vb->lock);
> +
> +finished:
> +	/* zero-fill the left dirty or free regions */
> +	if (count)
> +		memset(buf, 0, count);
> +}
> +
>  /**
>   * vread() - read vmalloc area in a safe way.
>   * @buf:     buffer for reading data
> @@ -3574,7 +3635,7 @@ long vread(char *buf, char *addr, unsigned long count)
>  	struct vm_struct *vm;
>  	char *vaddr, *buf_start = buf;
>  	unsigned long buflen = count;
> -	unsigned long n;
> +	unsigned long n, size, flags;
>
>  	addr = kasan_reset_tag(addr);
>
> @@ -3595,12 +3656,21 @@ long vread(char *buf, char *addr, unsigned long count)
>  		if (!count)
>  			break;
>
> -		if (!va->vm)
> +		vm = va->vm;
> +		flags = va->flags & VMAP_FLAGS_MASK;
> +		/*
> +		 * VMAP_BLOCK indicates a sub-type of vm_map_ram area, need
> +		 * be set together with VMAP_RAM.
> +		 */
> +		WARN_ON(flags == VMAP_BLOCK);
> +
> +		if (!vm && !flags)
>  			continue;
>
> -		vm = va->vm;
> -		vaddr = (char *) vm->addr;
> -		if (addr >= vaddr + get_vm_area_size(vm))
> +		vaddr = (char *) va->va_start;
> +		size = vm ? get_vm_area_size(vm) : va_size(va);
> +
> +		if (addr >= vaddr + size)
>  			continue;
>  		while (addr < vaddr) {
>  			if (count == 0)
> @@ -3610,10 +3680,13 @@ long vread(char *buf, char *addr, unsigned long count)
>  			addr++;
>  			count--;
>  		}
> -		n = vaddr + get_vm_area_size(vm) - addr;
> +		n = vaddr + size - addr;
>  		if (n > count)
>  			n = count;
> -		if (!(vm->flags & VM_IOREMAP))
> +
> +		if (flags & VMAP_RAM)
> +			vmap_ram_vread(buf, addr, n, flags);
> +		else if (!(vm->flags & VM_IOREMAP))
>  			aligned_vread(buf, addr, n);
>  		else /* IOREMAP area is treated as memory hole */
>  			memset(buf, 0, n);
> --
> 2.34.1
>

Other than the nit, feel free to add:-

Reviewed-by: Lorenzo Stoakes <lstoakes@xxxxxxxxx>




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux