On Thu, Jan 19, 2023 at 01:22:44PM -0800, Rick Edgecombe wrote: > Just like user xfeatures, supervisor xfeatures can be active in the > registers or present in the task FPU buffer. If the registers are > active, the registers can be modified directly. If the registers are > not active, the modification must be performed on the task FPU buffer. > > When the state is not active, the kernel could perform modifications > directly to the buffer. But in order for it to do that, it needs > to know where in the buffer the specific state it wants to modify is > located. Doing this is not robust against optimizations that compact > the FPU buffer, as each access would require computing where in the > buffer it is. > > The easiest way to modify supervisor xfeature data is to force restore > the registers and write directly to the MSRs. Often times this is just fine > anyway as the registers need to be restored before returning to userspace. > Do this for now, leaving buffer writing optimizations for the future. > > Add a new function fpregs_lock_and_load() that can simultaneously call > fpregs_lock() and do this restore. Also perform some extra sanity > checks in this function since this will be used in non-fpu focused code. > > Tested-by: Pengfei Xu <pengfei.xu@xxxxxxxxx> > Tested-by: John Allen <john.allen@xxxxxxx> > Suggested-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx> > Signed-off-by: Rick Edgecombe <rick.p.edgecombe@xxxxxxxxx> Reviewed-by: Kees Cook <keescook@xxxxxxxxxxxx> -- Kees Cook
