On Tue, Nov 8, 2022 at 9:04 PM HORIGUCHI NAOYA(堀口 直也) <naoya.horiguchi@xxxxxxx> wrote: > > On Tue, Nov 08, 2022 at 04:17:06PM +0000, Luck, Tony wrote: > > > If it is feasible in future that hardware vendors can make patrol > > > scrubber programmable, we can even direct the scanning to patrol > > > scrubber. > > > > There was an attempt to create an ACPI interface for this. I don't know if it made > > it into the standard. > > I briefly checked the latest ACPI spec, and it seems that some interfaces > to control (h/w based) patrol scrubbing are defined. > > https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#acpi-ras-feature-table-rasf A followup question to Intel and AMD RAS folks (Mike and Vilas), what is your position on the ACPI interface to control hw patrol scrubber, and further make it programmable by kernel? Is this something you are willing to consider? > > > I didn't do anything with it for Linux because the interface was > > quite complex. > > > > From a h/w perspective it might always be complex. Consecutive system physical > > addresses are generally interleaved across multiple memory controllers, channels, > > DIMMs and ranks. While patrol scrubbing may be done by each memory controller > > at the channel level. > > > > So a simple request to scan a few megabytes of system physical address would > > require address translation to figure out the channel addresses on each of the > > memory controllers and programming each to scan the pieces they contribute to > > the target range. > > I expect that the physical address visible to the kernel is transparently > translated to the real address in which DIMM in which channel. > > - Naoya Horiguchi
