[RFC PATCH v2 01/12] arch: mm: rename FORCE_MAX_ZONEORDER to ARCH_FORCE_MAX_ORDER

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Zi Yan <ziy@xxxxxxxxxx>

This Kconfig option is used by individual arch to set its desired
MAX_ORDER. Rename it to reflect its actual use.

Signed-off-by: Zi Yan <ziy@xxxxxxxxxx>
Cc: Vineet Gupta <vgupta@xxxxxxxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
Cc: Guo Ren <guoren@xxxxxxxxxx>
Cc: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Cc: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
Cc: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Cc: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Chris Zankel <chris@xxxxxxxxxx>
Cc: linux-snps-arc@xxxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-oxnas@xxxxxxxxx
Cc: linux-csky@xxxxxxxxxxxxxxx
Cc: linux-ia64@xxxxxxxxxxxxxxx
Cc: linux-m68k@xxxxxxxxxxxxxxxxxxxx
Cc: linux-mips@xxxxxxxxxxxxxxx
Cc: linuxppc-dev@xxxxxxxxxxxxxxxx
Cc: linux-sh@xxxxxxxxxxxxxxx
Cc: sparclinux@xxxxxxxxxxxxxxx
Cc: linux-xtensa@xxxxxxxxxxxxxxxx
Cc: linux-mm@xxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
 arch/arc/Kconfig                             | 2 +-
 arch/arm/Kconfig                             | 2 +-
 arch/arm/configs/imx_v6_v7_defconfig         | 2 +-
 arch/arm/configs/milbeaut_m10v_defconfig     | 2 +-
 arch/arm/configs/oxnas_v6_defconfig          | 2 +-
 arch/arm/configs/sama7_defconfig             | 2 +-
 arch/arm64/Kconfig                           | 2 +-
 arch/csky/Kconfig                            | 2 +-
 arch/ia64/Kconfig                            | 2 +-
 arch/ia64/include/asm/sparsemem.h            | 6 +++---
 arch/m68k/Kconfig.cpu                        | 2 +-
 arch/mips/Kconfig                            | 2 +-
 arch/nios2/Kconfig                           | 2 +-
 arch/powerpc/Kconfig                         | 2 +-
 arch/powerpc/configs/85xx/ge_imp3a_defconfig | 2 +-
 arch/powerpc/configs/fsl-emb-nonhw.config    | 2 +-
 arch/sh/configs/ecovec24_defconfig           | 2 +-
 arch/sh/mm/Kconfig                           | 2 +-
 arch/sparc/Kconfig                           | 2 +-
 arch/xtensa/Kconfig                          | 2 +-
 include/linux/mmzone.h                       | 4 ++--
 21 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 9e3653253ef2..d9a13ccf89a3 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -554,7 +554,7 @@ config ARC_BUILTIN_DTB_NAME
 
 endmenu	 # "ARC Architecture Configuration"
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	default "12" if ARC_HUGEPAGE_16M
 	default "11"
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 87badeae3181..e6c8ee56ac52 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1434,7 +1434,7 @@ config ARM_MODULE_PLTS
 	  Disabling this is usually safe for small single-platform
 	  configurations. If unsure, say y.
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	default "12" if SOC_AM33XX
 	default "9" if SA1111
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 01012537a9b9..fb283059daa0 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -31,7 +31,7 @@ CONFIG_SOC_VF610=y
 CONFIG_SMP=y
 CONFIG_ARM_PSCI=y
 CONFIG_HIGHMEM=y
-CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_ARCH_FORCE_MAX_ORDER=14
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig
index 58810e98de3d..8620061e19a8 100644
--- a/arch/arm/configs/milbeaut_m10v_defconfig
+++ b/arch/arm/configs/milbeaut_m10v_defconfig
@@ -26,7 +26,7 @@ CONFIG_THUMB2_KERNEL=y
 # CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11 is not set
 # CONFIG_ARM_PATCH_IDIV is not set
 CONFIG_HIGHMEM=y
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=12
 CONFIG_SECCOMP=y
 CONFIG_KEXEC=y
 CONFIG_EFI=y
diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig
index 600f78b363dd..5c163a9d1429 100644
--- a/arch/arm/configs/oxnas_v6_defconfig
+++ b/arch/arm/configs/oxnas_v6_defconfig
@@ -12,7 +12,7 @@ CONFIG_ARCH_OXNAS=y
 CONFIG_MACH_OX820=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=12
 CONFIG_SECCOMP=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
index 0384030d8b25..8b2cf6ddd568 100644
--- a/arch/arm/configs/sama7_defconfig
+++ b/arch/arm/configs/sama7_defconfig
@@ -19,7 +19,7 @@ CONFIG_ATMEL_CLOCKSOURCE_TCB=y
 # CONFIG_CACHE_L2X0 is not set
 # CONFIG_ARM_PATCH_IDIV is not set
 # CONFIG_CPU_SW_DOMAIN_PAN is not set
-CONFIG_FORCE_MAX_ZONEORDER=15
+CONFIG_ARCH_FORCE_MAX_ORDER=15
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
 CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk ignore_loglevel"
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 571cc234d0b3..c6fcd8746f60 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1401,7 +1401,7 @@ config XEN
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64.
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int
 	default "14" if ARM64_64K_PAGES
 	default "12" if ARM64_16K_PAGES
diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
index 3cbc2dc62baf..adee6ab36862 100644
--- a/arch/csky/Kconfig
+++ b/arch/csky/Kconfig
@@ -332,7 +332,7 @@ config HIGHMEM
 	select KMAP_LOCAL
 	default y
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	default "11"
 
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 26ac8ea15a9e..c6e06cdc738f 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -200,7 +200,7 @@ config IA64_CYCLONE
 	  Say Y here to enable support for IBM EXA Cyclone time source.
 	  If you're unsure, answer N.
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "MAX_ORDER (11 - 17)"  if !HUGETLB_PAGE
 	range 11 17  if !HUGETLB_PAGE
 	default "17" if HUGETLB_PAGE
diff --git a/arch/ia64/include/asm/sparsemem.h b/arch/ia64/include/asm/sparsemem.h
index 42ed5248fae9..84e8ce387b69 100644
--- a/arch/ia64/include/asm/sparsemem.h
+++ b/arch/ia64/include/asm/sparsemem.h
@@ -11,10 +11,10 @@
 
 #define SECTION_SIZE_BITS	(30)
 #define MAX_PHYSMEM_BITS	(50)
-#ifdef CONFIG_FORCE_MAX_ZONEORDER
-#if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
+#ifdef CONFIG_ARCH_FORCE_MAX_ORDER
+#if ((CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
 #undef SECTION_SIZE_BITS
-#define SECTION_SIZE_BITS (CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT)
+#define SECTION_SIZE_BITS (CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT)
 #endif
 #endif
 
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index e0e9e31339c1..3b2f39508524 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -399,7 +399,7 @@ config SINGLE_MEMORY_CHUNK
 	  order" to save memory that could be wasted for unused memory map.
 	  Say N if not sure.
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order" if ADVANCED
 	depends on !SINGLE_MEMORY_CHUNK
 	default "11"
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ec21f8999249..70d28976a40d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2140,7 +2140,7 @@ config PAGE_SIZE_64KB
 
 endchoice
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	range 14 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
 	default "14" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index 4167f1eb4cd8..a582f72104f3 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -44,7 +44,7 @@ menu "Kernel features"
 
 source "kernel/Kconfig.hz"
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	range 9 20
 	default "11"
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4c466acdc70d..39d71d7701bd 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -845,7 +845,7 @@ config DATA_SHIFT
 	  in that case. If PIN_TLB is selected, it must be aligned to 8M as
 	  8M pages will be pinned.
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	range 8 9 if PPC64 && PPC_64K_PAGES
 	default "9" if PPC64 && PPC_64K_PAGES
diff --git a/arch/powerpc/configs/85xx/ge_imp3a_defconfig b/arch/powerpc/configs/85xx/ge_imp3a_defconfig
index f29c166998af..e7672c186325 100644
--- a/arch/powerpc/configs/85xx/ge_imp3a_defconfig
+++ b/arch/powerpc/configs/85xx/ge_imp3a_defconfig
@@ -30,7 +30,7 @@ CONFIG_PREEMPT=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-CONFIG_FORCE_MAX_ZONEORDER=17
+CONFIG_ARCH_FORCE_MAX_ORDER=17
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_MSI=y
diff --git a/arch/powerpc/configs/fsl-emb-nonhw.config b/arch/powerpc/configs/fsl-emb-nonhw.config
index f14c6dbd7346..ab8a8c4530d9 100644
--- a/arch/powerpc/configs/fsl-emb-nonhw.config
+++ b/arch/powerpc/configs/fsl-emb-nonhw.config
@@ -41,7 +41,7 @@ CONFIG_FIXED_PHY=y
 CONFIG_FONT_8x16=y
 CONFIG_FONT_8x8=y
 CONFIG_FONTS=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_ARCH_FORCE_MAX_ORDER=13
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAME_WARN=1024
 CONFIG_FTL=y
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
index e699e2e04128..b52e14ccb450 100644
--- a/arch/sh/configs/ecovec24_defconfig
+++ b/arch/sh/configs/ecovec24_defconfig
@@ -8,7 +8,7 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=12
 CONFIG_MEMORY_SIZE=0x10000000
 CONFIG_FLATMEM_MANUAL=y
 CONFIG_SH_ECOVEC=y
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index ba569cfb4368..411fdc0901f7 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -18,7 +18,7 @@ config PAGE_OFFSET
 	default "0x80000000" if MMU
 	default "0x00000000"
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	range 9 64 if PAGE_SIZE_16KB
 	default "9" if PAGE_SIZE_16KB
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 1c852bb530ec..4d3d1af90d52 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -269,7 +269,7 @@ config ARCH_SPARSEMEM_ENABLE
 config ARCH_SPARSEMEM_DEFAULT
 	def_bool y if SPARC64
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	default "13"
 	help
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 12ac277282ba..bcb0c5d2abc2 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -771,7 +771,7 @@ config HIGHMEM
 
 	  If unsure, say Y.
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	default "11"
 	help
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 8f571dc7c524..ca285ed3c6e0 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -24,10 +24,10 @@
 #include <asm/page.h>
 
 /* Free memory management - zoned buddy allocator.  */
-#ifndef CONFIG_FORCE_MAX_ZONEORDER
+#ifndef CONFIG_ARCH_FORCE_MAX_ORDER
 #define MAX_ORDER 11
 #else
-#define MAX_ORDER CONFIG_FORCE_MAX_ZONEORDER
+#define MAX_ORDER CONFIG_ARCH_FORCE_MAX_ORDER
 #endif
 #define MAX_ORDER_NR_PAGES (1 << (MAX_ORDER - 1))
 
-- 
2.35.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux