From: Barry Song <v-songbaohua@xxxxxxxx>
on x86, batched and deferred tlb shootdown has lead to 90%
performance increase on tlb shootdown. on arm64, HW can do
tlb shootdown without software IPI. But sync tlbi is still
quite expensive.
Even running a simplest program which requires swapout can
prove this is true,
#include <sys/types.h>
#include <unistd.h>
#include <sys/mman.h>
#include <string.h>
int main()
{
#define SIZE (1 * 1024 * 1024)
volatile unsigned char *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_ANONYMOUS, -1, 0);
memset(p, 0x88, SIZE);
for (int k = 0; k < 10000; k++) {
/* swap in */
for (int i = 0; i < SIZE; i += 4096) {
(void)p[i];
}
/* swap out */
madvise(p, SIZE, MADV_PAGEOUT);
}
}
Perf result on snapdragon 888 with 8 cores by using zRAM
as the swap block device.
~ # perf record taskset -c 4 ./a.out
[ perf record: Woken up 10 times to write data ]
[ perf record: Captured and wrote 2.297 MB perf.data (60084 samples) ]
~ # perf report
# To display the perf.data header info, please use --header/--header-only options.
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 60K of event 'cycles'
# Event count (approx.): 35706225414
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. .............................................................................
#
21.07% a.out [kernel.kallsyms] [k] _raw_spin_unlock_irq
8.23% a.out [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore
6.67% a.out [kernel.kallsyms] [k] filemap_map_pages
6.16% a.out [kernel.kallsyms] [k] __zram_bvec_write
5.36% a.out [kernel.kallsyms] [k] ptep_clear_flush
3.71% a.out [kernel.kallsyms] [k] _raw_spin_lock
3.49% a.out [kernel.kallsyms] [k] memset64
1.63% a.out [kernel.kallsyms] [k] clear_page
1.42% a.out [kernel.kallsyms] [k] _raw_spin_unlock
1.26% a.out [kernel.kallsyms] [k] mod_zone_state.llvm.8525150236079521930
1.23% a.out [kernel.kallsyms] [k] xas_load
1.15% a.out [kernel.kallsyms] [k] zram_slot_lock
ptep_clear_flush() takes 5.36% CPU in the micro-benchmark
swapping in/out a page mapped by only one process. If the
page is mapped by multiple processes, typically, like more
than 100 on a phone, the overhead would be much higher as
we have to run tlb flush 100 times for one single page.
Plus, tlb flush overhead will increase with the number
of CPU cores due to the bad scalability of tlb shootdown
in HW, so those ARM64 servers should expect much higher
overhead.
Further perf annonate shows 95% cpu time of ptep_clear_flush
is actually used by the final dsb() to wait for the completion
of tlb flush. This provides us a very good chance to leverage
the existing batched tlb in kernel. The minimum modification
is that we only send async tlbi in the first stage and we send
dsb while we have to sync in the second stage.
With the above simplest micro benchmark, collapsed time to
finish the program decreases around 5%.
Typical collapsed time w/o patch:
~ # time taskset -c 4 ./a.out
0.21user 14.34system 0:14.69elapsed
w/ patch:
~ # time taskset -c 4 ./a.out
0.22user 13.45system 0:13.80elapsed
Cc: Jonathan Corbet <corbet@xxxxxxx>
Cc: Nadav Amit <namit@xxxxxxxxxx>
Cc: Mel Gorman <mgorman@xxxxxxx>
Signed-off-by: Barry Song <v-songbaohua@xxxxxxxx>
---
Documentation/features/vm/TLB/arch-support.txt | 2 +-
arch/arm64/Kconfig | 1 +
arch/arm64/include/asm/tlbbatch.h | 12 ++++++++++++
arch/arm64/include/asm/tlbflush.h | 13 +++++++++++++
4 files changed, 27 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/include/asm/tlbbatch.h
diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt
index 1c009312b9c1..2caf815d7c6c 100644
--- a/Documentation/features/vm/TLB/arch-support.txt
+++ b/Documentation/features/vm/TLB/arch-support.txt
@@ -9,7 +9,7 @@
| alpha: | TODO |
| arc: | TODO |
| arm: | TODO |
- | arm64: | TODO |
+ | arm64: | ok |
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 1652a9800ebe..e94913a0b040 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -93,6 +93,7 @@ config ARM64
select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
select ARCH_SUPPORTS_NUMA_BALANCING
select ARCH_SUPPORTS_PAGE_TABLE_CHECK
+ select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT
select ARCH_WANT_DEFAULT_BPF_JIT
select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
diff --git a/arch/arm64/include/asm/tlbbatch.h b/arch/arm64/include/asm/tlbbatch.h
new file mode 100644
index 000000000000..fedb0b87b8db
--- /dev/null
+++ b/arch/arm64/include/asm/tlbbatch.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ARCH_ARM64_TLBBATCH_H
+#define _ARCH_ARM64_TLBBATCH_H
+
+struct arch_tlbflush_unmap_batch {
+ /*
+ * For arm64, HW can do tlb shootdown, so we don't
+ * need to record cpumask for sending IPI
+ */
+};
+
+#endif /* _ARCH_ARM64_TLBBATCH_H */
diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
index 412a3b9a3c25..b3ed163267ca 100644
--- a/arch/arm64/include/asm/tlbflush.h
+++ b/arch/arm64/include/asm/tlbflush.h
@@ -272,6 +272,19 @@ static inline void flush_tlb_page(struct vm_area_struct *vma,
dsb(ish);
}
+static inline void arch_tlbbatch_add_mm(struct arch_tlbflush_unmap_batch *batch,
+ struct mm_struct *mm,
+ struct vm_area_struct *vma,
+ unsigned long uaddr)
+{
+ flush_tlb_page_nosync(vma, uaddr);
+}
+
+static inline void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
+{
+ dsb(ish);
+}
+
/*
* This is meant to avoid soft lock-ups on large TLB flushing ranges and not
* necessarily a performance improvement.
--
2.25.1
