This patch series adds support for async buffered writes when using both
xfs and io-uring. Currently io-uring only supports buffered writes in the
slow path, by processing them in the io workers. With this patch series it is
now possible to support buffered writes in the fast path. To be able to use
the fast path the required pages must be in the page cache, the required locks
in xfs can be granted immediately and no additional blocks need to be read
form disk.
Updating the inode can take time. An optimization has been implemented for
the time update. Time updates will be processed in the slow path. While there
is already a time update in process, other write requests for the same file,
can skip the update of the modification time.
Performance results:
For fio the following results have been obtained with a queue depth of
1 and 4k block size (runtime 600 secs):
sequential writes:
without patch with patch libaio psync
iops: 77k 209k 195K 233K
bw: 314MB/s 854MB/s 790MB/s 953MB/s
clat: 9600ns 120ns 540ns 3000ns
For an io depth of 1, the new patch improves throughput by over three times
(compared to the exiting behavior, where buffered writes are processed by an
io-worker process) and also the latency is considerably reduced. To achieve the
same or better performance with the exisiting code an io depth of 4 is required.
Increasing the iodepth further does not lead to improvements.
In addition the latency of buffered write operations is reduced considerably.
Support for async buffered writes:
To support async buffered writes the flag FMODE_BUF_WASYNC is introduced. In
addition the check in generic_write_checks is modified to allow for async
buffered writes that have this flag set.
Changes to the iomap page create function to allow the caller to specify
the gfp flags. Sets the IOMAP_NOWAIT flag in iomap if IOCB_NOWAIT has been set
and specifies the requested gfp flags.
Adds the iomap async buffered write support to the xfs iomap layer.
Adds async buffered write support to the xfs iomap layer.
Support for async buffered write support and inode time modification
Splits the functions for checking if the file privileges need to be removed in
two functions: check function and a function for the removal of file privileges.
The same split is also done for the function to update the file modification time.
Implement an optimization that while a file modification time is pending other
requests for the same file don't need to wait for the file modification update.
This avoids that a considerable number of buffered async write requests get
punted.
Take the ilock in nowait mode if async buffered writes are enabled and enable
the async buffered writes optimization in io_uring.
Support for write throttling of async buffered writes:
Add a no_wait parameter to the exisiting balance_dirty_pages() function. The
function will return -EAGAIN if the parameter is true and write throttling is
required.
Add a new function called balance_dirty_pages_ratelimited_async() that will be
invoked from iomap_write_iter() if an async buffered write is requested.
Enable async buffered write support in xfs
This enables async buffered writes for xfs.
Testing:
This patch has been tested with xfstests, fsx, fio and individual test programs.
Changes:
V9:
- Added comment for function balance_dirty_pages_ratelimited_flags()
- checking return code for iop allocation in iomap_page_create()
V8:
- Reverted back changes to iomap_write_iter and used Mathew Wilcox code review
recommendation with an additional change to revert the iterator.
- Removed patch "fs: Optimization for concurrent file time updates"
- Setting flag value in file_modified_flags()
- Removed additional spaces in comment in file_update_time()
- Run fsx with 1 billion ops against the changes (Run passed)
V7:
- Change definition and if clause in " iomap: Add flags parameter to
iomap_page_create()"
- Added patch "iomap: Return error code from iomap_write_iter()" to address
the problem Dave Chinner brought up: retrying memory allocation a second
time when we are under memory pressure.
- Removed patch "xfs: Change function signature of xfs_ilock_iocb()"
- Merged patch "xfs: Enable async buffered write support" with previous
patch
V6:
- Pass in iter->flags to calls in iomap_page_create()
V5:
- Refreshed to 5.19-rc1
- Merged patch 3 and patch 4
"mm: Prepare balance_dirty_pages() for async buffered writes" and
"mm: Add balance_dirty_pages_ratelimited_flags() function"
- Reformatting long file in iomap_page_create()
- Replacing gfp parameter with flags parameter in iomap_page_create()
This makes sure that the gfp setting is done in one location.
- Moved variable definition outside of loop in iomap_write_iter()
- Merged patch 7 with patch 6.
- Introduced __file_remove_privs() that get the iocb_flags passed in
as an additional parameter
- Removed file_needs_remove_privs() function
- Renamed file_needs_update_time() inode_needs_update_time()
- inode_needs_update_time() no longer passes the file pointer
- Renamed file_modified_async() to file_modified_flags()
- Made file_modified_flags() an internal function
- Removed extern keyword in file_modified_async definition
- Added kiocb_modified function.
- Separate patch for changes to xfs_ilock_for_iomap()
- Separate patch for changes to xfs_ilock_inode()
- Renamed xfs_ilock_xfs_inode()n back to xfs_ilock_iocb()
- Renamed flags parameter to iocb_flags in function xfs_ilock_iocb()
- Used inode_set_flags() to manipulate inode flags in the function
file_modified_flags()
V4:
- Reformat new code in generic_write_checks_count().
- Removed patch that introduced new function iomap_page_create_gfp().
- Add gfp parameter to iomap_page_create() and change all callers
All users will enforce the number of blocks check
- Removed confusing statement in iomap async buffer support patch
- Replace no_wait variable in __iomap_write_begin with check of
IOMAP_NOWAIT for easier readability.
- Moved else if clause in __iomap_write_begin into else clause for
easier readability
- Removed the balance_dirty_pages_ratelimited_async() function and
reverted back to the earlier version that used the function
balance_dirty_pages_ratelimited_flags()
- Introduced the flag BDP_ASYNC.
- Renamed variable in iomap_write_iter from i_mapping to mapping.
- Directly call balance_dirty_pages_ratelimited_flags() in the function
iomap_write_iter().
- Re-ordered the patches.
V3:
- Reformat new code in generic_write_checks_count() to line lengthof 80.
- Remove if condition in __iomap_write_begin to maintain current behavior.
- use GFP_NOWAIT flag in __iomap_write_begin
- rename need_file_remove_privs() function to file_needs_remove_privs()
- rename do_file_remove_privs to __file_remove_privs()
- add kernel documentation to file_remove_privs() function
- rework else if branch in file_remove_privs() function
- add kernel documentation to file_modified() function
- add kernel documentation to file_modified_async() function
- rename err variable in file_update_time to ret
- rename function need_file_update_time() to file_needs_update_time()
- rename function do_file_update_time() to __file_update_time()
- don't move check for FMODE_NOCMTIME in generic helper
- reformat __file_update_time for easier reading
- add kernel documentation to file_update_time() function
- fix if in file_update_time from < to <=
- move modification of inode flags from do_file_update_time to file_modified()
When this function is called, the caller must hold the inode lock.
- 3 new patches from Jan to add new no_wait flag to balance_dirty_pages(),
remove patch 12 from previous series
- Make balance_dirty_pages_ratelimited_flags() a static function
- Add new balance_dirty_pages_ratelimited_async() function
V2:
- Remove atomic allocation
- Use direct write in xfs_buffered_write_iomap_begin()
- Use xfs_ilock_for_iomap() in xfs_buffered_write_iomap_begin()
- Remove no_wait check at the end of xfs_buffered_write_iomap_begin() for
the COW path.
- Pass xfs_inode pointer to xfs_ilock_iocb and rename function to
xfs_lock_xfs_inode
- Replace existing uses of xfs_ilock_iocb with xfs_ilock_xfs_inode
- Use xfs_ilock_xfs_inode in xfs_file_buffered_write()
- Callers of xfs_ilock_for_iomap need to initialize lock mode. This is
required so writes use an exclusive lock
- Split of _balance_dirty_pages() from balance_dirty_pages() and return
sleep time
- Call _balance_dirty_pages() in balance_dirty_pages_ratelimited_flags()
- Move call to balance_dirty_pages_ratelimited_flags() in iomap_write_iter()
to the beginning of the loop
Jan Kara (3):
mm: Move starting of background writeback into the main balancing loop
mm: Move updates of dirty_exceeded into one place
mm: Add balance_dirty_pages_ratelimited_flags() function
Stefan Roesch (11):
iomap: Add flags parameter to iomap_page_create()
iomap: Add async buffered write support
iomap: Return -EAGAIN from iomap_write_iter()
fs: Add check for async buffered writes to generic_write_checks
fs: add __remove_file_privs() with flags parameter
fs: Split off inode_needs_update_time and __file_update_time
fs: Add async write file modification handling.
io_uring: Add support for async buffered writes
io_uring: Add tracepoint for short writes
xfs: Specify lockmode when calling xfs_ilock_for_iomap()
xfs: Add async buffered write support
fs/inode.c | 168 +++++++++++++++++++++++---------
fs/io_uring.c | 32 +++++-
fs/iomap/buffered-io.c | 71 +++++++++++---
fs/read_write.c | 4 +-
fs/xfs/xfs_file.c | 11 +--
fs/xfs/xfs_iomap.c | 11 ++-
include/linux/fs.h | 4 +
include/linux/writeback.h | 7 ++
include/trace/events/io_uring.h | 25 +++++
mm/page-writeback.c | 89 +++++++++++------
10 files changed, 314 insertions(+), 108 deletions(-)
base-commit: b13baccc3850ca8b8cccbf8ed9912dbaa0fdf7f3
--
2.30.2
