Re: [PATCH v5 0/5] introduce mirrored memory support for arm64

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2022/6/14 17:21, Wupeng Ma wrote:
From: Ma Wupeng <mawupeng1@xxxxxxxxxx>

Commit b05b9f5f9dcf ("x86, mirror: x86 enabling - find mirrored memory ranges")
introduced mirrored memory support for x86. This support rely on UEFI to
report mirrored memory address ranges.  See UEFI 2.5 spec pages 157-158:

   http://www.uefi.org/sites/default/files/resources/UEFI%202_5.pdf

Memory mirroring is a technique used to separate memory into two separate
channels, usually on a memory device, like a server. In memory mirroring,
one channel is copied to another to create redundancy. This method makes
input/output (I/O) registers and memory appear with more than one address
range because the same physical byte is accessible at more than one
address. Using memory mirroring, higher memory reliability and a higher
level of memory consolidation are possible.

These EFI memory regions have various attributes, and the "mirrored"
attribute is one of them. The physical memory region whose descriptors
in EFI memory map has EFI_MEMORY_MORE_RELIABLE attribute (bit: 16) are
mirrored. The address range mirroring feature of the kernel arranges such
mirrored regions into normal zones and other regions into movable zones.

Arm64 can support this too. So mirrored memory support is added to support
arm64.

The main purpose of this patch set is to introduce mirrored support for
arm64 and we have already fixed the problems we had which is shown in
patch #5 to patch #8 and try to bring total isolation in patch #9 which
will disable mirror feature if kernelcore is not specified.

In order to test this support in arm64:
- patch this patch set
- add kernelcore=mirror in kernel parameter
- start you kernel

Patch #1 introduce mirrored memory support form arm64.
Patch #2-#4 fix some bugs for arm64 if memory reliable is enabled.
Patch #5 disable mirror feature if kernelcore is not specified.

Thanks to Ard Biesheuvel's hard work [1], now kernel will perfer mirrored
memory if kaslr is enabled.

[1] https://lore.kernel.org/linux-arm-kernel/CAMj1kXEPVEzMgOM4+Yj6PxHA-jFuDOAUdDJSiSxy_XaP4P7LSw@xxxxxxxxxxxxxx/T/

For series,

Reviewed-by: Kefeng Wang<wangkefeng.wang@xxxxxxxxxx>


Changelog since v4:
- merge the first two patches into one
- change __initdata to __initdata_memblock in patch #5

Changelog since v3:
- limit warning message in vmemmap_verify via pr_warn_once()
- only clear memblock_nomap flags rather than bring the mirrored flag back
- disable mirrored feature in memblock_mark_mirror()

Changelog since v2:
- remove efi_fake_mem support
- remove Commit ("remove some redundant code in ia64 efi_init") since
   efi_print_memmap() is not public
- add mirror flag back on initrd memory

Changelog since v1:
- update changelog in cover letter
- use PHYS_PFN in patch #7

Ma Wupeng (5):
   efi: arm64: Introduce ability to find mirrored memory ranges
   mm: Ratelimited mirrored memory related warning messages
   mm: Limit warning message in vmemmap_verify() to once
   arm64: mm: Only remove nomap flag for initrd
   memblock: Disable mirror feature if kernelcore is not specified

  arch/arm64/mm/init.c            |  2 +-
  arch/x86/include/asm/efi.h      |  4 ----
  arch/x86/platform/efi/efi.c     | 23 -----------------------
  drivers/firmware/efi/efi-init.c |  1 +
  drivers/firmware/efi/efi.c      | 23 +++++++++++++++++++++++
  include/linux/efi.h             |  3 +++
  mm/internal.h                   |  2 ++
  mm/memblock.c                   |  7 +++++--
  mm/page_alloc.c                 |  2 +-
  mm/sparse-vmemmap.c             |  2 +-
  10 files changed, 37 insertions(+), 32 deletions(-)





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux