On Tue, Apr 26, 2022 at 04:02:19PM +1000, Dave Chinner wrote: > On Fri, Apr 22, 2022 at 01:26:37PM -0700, Roman Gushchin wrote: > > There are 50+ different shrinkers in the kernel, many with their own bells and > > whistles. Under the memory pressure the kernel applies some pressure on each of > > them in the order of which they were created/registered in the system. Some > > of them can contain only few objects, some can be quite large. Some can be > > effective at reclaiming memory, some not. > > > > The only existing debugging mechanism is a couple of tracepoints in > > do_shrink_slab(): mm_shrink_slab_start and mm_shrink_slab_end. They aren't > > covering everything though: shrinkers which report 0 objects will never show up, > > there is no support for memcg-aware shrinkers. Shrinkers are identified by their > > scan function, which is not always enough (e.g. hard to guess which super > > block's shrinker it is having only "super_cache_scan"). > > In general, I've had no trouble identifying individual shrinker > instances because I'm always looking at individual subsystem > shrinker tracepoints, too. Hence I've almost always got the > identification information in the traces I need to trace just the > individual shrinker tracepoints and a bit of sed/grep/awk and I've > got something I can feed to gnuplot or a python script to graph... > > > They are a passive > > mechanism: there is no way to call into counting and scanning of an individual > > shrinker and profile it. > > IDGI. profiling shrinkers iunder ideal conditions when there isn't > memory pressure is largely a useless exercise because execution > patterns under memory pressure are vastly different. > > All the problems with shrinkers show up when progress cannot be made > as fast as memory reclaim wants memory to be reclaimed. How do you > trigger priority windup causing large amounts of deferred processing > because shrinkers are running in GFP_NOFS/GFP_NOIO context? How do > you simulate objects getting dirtied in memory so they can't be > immediately reclaimed so the shrinker can't make any progress at all > until IO completes? How do you simulate the unbound concurrency that > direct reclaim can drive into the shrinkers that causes massive lock > contention on shared structures and locks that need to be accessed > to free objects? > > IOWs, if all you want to do is profile shrinkers running in the > absence of memory pressure, then you can do that perfectly well with > the existing 'echo 2 > /proc/sys/vm/drop_caches' mechanism. We don't > need some complex debugfs API just to profile the shrinker > behaviour. > > So why do we need any of the complexity and potential for abuse that > comes from exposing control of shrinkers directly to userspace like > these patches do? > > > To provide a better visibility and debug options for memory shrinkers > > this patchset introduces a /sys/kernel/debug/shrinker interface, to some extent > > similar to /sys/kernel/slab. > > /sys/kernel/slab contains read-only usage information - it is > analagous for visibility arguments, but it is not equivalent for > the rest of the "active" functionality you want to add here.... > > > For each shrinker registered in the system a directory is created. The directory > > contains "count" and "scan" files, which allow to trigger count_objects() > > and scan_objects() callbacks. For memcg-aware and numa-aware shrinkers > > count_memcg, scan_memcg, count_node, scan_node, count_memcg_node > > and scan_memcg_node are additionally provided. They allow to get per-memcg > > and/or per-node object count and shrink only a specific memcg/node. > > Great, but why does the shrinker introspection interface need active > scan control functions like these? > > > To make debugging more pleasant, the patchset also names all shrinkers, > > so that debugfs entries can have more meaningful names. > > > > Usage examples: > > > > 1) List registered shrinkers: > > $ cd /sys/kernel/debug/shrinker/ > > $ ls > > dqcache-16 sb-cgroup2-30 sb-hugetlbfs-33 sb-proc-41 sb-selinuxfs-22 sb-tmpfs-40 sb-zsmalloc-19 > > kfree_rcu-0 sb-configfs-23 sb-iomem-12 sb-proc-44 sb-sockfs-8 sb-tmpfs-42 shadow-18 > > sb-aio-20 sb-dax-11 sb-mqueue-21 sb-proc-45 sb-sysfs-26 sb-tmpfs-43 thp_deferred_split-10 > > sb-anon_inodefs-15 sb-debugfs-7 sb-nsfs-4 sb-proc-47 sb-tmpfs-1 sb-tmpfs-46 thp_zero-9 > > sb-bdev-3 sb-devpts-28 sb-pipefs-14 sb-pstore-31 sb-tmpfs-27 sb-tmpfs-49 xfs_buf-37 > > sb-bpf-32 sb-devtmpfs-5 sb-proc-25 sb-rootfs-2 sb-tmpfs-29 sb-tracefs-13 xfs_inodegc-38 > > sb-btrfs-24 sb-hugetlbfs-17 sb-proc-39 sb-securityfs-6 sb-tmpfs-35 sb-xfs-36 zspool-34 > > Ouch. That's not going to be useful for humans debugging a system as > there's no way to cross reference a "superblock" with an actual > filesystem mount point. Nor is there any way to reallly know that > all the shrinkers in one filesystem are related. > > We normally solve this by ensuring that the fs related object has > the short bdev name appended to them. e.g: > > $ pgrep xfs > 1 I root 36 2 0 60 -20 - 0 - Apr19 ? 00:00:10 [kworker/0:1H-xfs-log/dm-3] > 1 I root 679 2 0 60 -20 - 0 - Apr19 ? 00:00:00 [xfsalloc] > 1 I root 680 2 0 60 -20 - 0 - Apr19 ? 00:00:00 [xfs_mru_cache] > 1 I root 681 2 0 60 -20 - 0 - Apr19 ? 00:00:00 [xfs-buf/dm-1] > ..... > > Here we have a kworker process running log IO completion work on > dm-3, two global workqueue rescuer tasks (alloc, mru) and a rescuer > task for xfs-buf workqueue on dm-1. > > We need the same name discrimination for shrinker information here, > too - just saying "this is an XFS superblock shrinker" is just not > sufficient when there are hundreds of XFS mount points with a > handful of shrinkers each. > > > 2) Get information about a specific shrinker: > > $ cd sb-btrfs-24/ > > $ ls > > count count_memcg count_memcg_node count_node scan scan_memcg scan_memcg_node scan_node > > > > 3) Count objects on the system/root cgroup level > > $ cat count > > 212 > > > > 4) Count objects on the system/root cgroup level per numa node (on a 2-node machine) > > $ cat count_node > > 209 3 > > So a single space separated line with a number per node? > > When you have a few hundred nodes and hundreds of thousands of objects per > node, we overrun the 4kB page size with a single line. What then? > > > 5) Count objects for each memcg (output format: cgroup inode, count) > > $ cat count_memcg > > 1 212 > > 20 96 > > 53 817 > > 2297 2 > > 218 13 > > 581 30 > > 911 124 > > <CUT> > > What does "<CUT>" mean? > > Also, this now iterates separate memcg per line. A parser now needs > to know the difference between count/count_node and > count_memcg/count_memcg_node because they are subtly different file > formats. These files should have the same format, otherwise it just > creates needless complexity. > > Indeed, why do we even need count/count_node? They are just the > "index 1" memcg output, so are totally redundant. > > > 6) Same but with a per-node output > > $ cat count_memcg_node > > 1 209 3 > > 20 96 0 > > 53 810 7 > > 2297 2 0 > > 218 13 0 > > 581 30 0 > > 911 124 0 > > <CUT> > > So now we have a hundred nodes in the machine and thousands of > memcgs. And the information we want is in the numerically largest > memcg that is last in the list. ANd we want to graph it's behaviour > over time at high resolution (say 1Hz). Now we burn huge amounts > of CPU counting memcgs that we don't care about and then throwing > away most of the information. That's highly in-efficient and really > doesn't scale. > > [snap active scan interface] > > This just seems like a solution looking for a problem to solve. > Can you please describe the problem this infrastructure is going > to solve? Hi Dave! Thank you for taking a look. Can you, please, summarize your position, because it's a bit unclear. You made a lot of good points about some details (e.g. shrinkers naming, and I totally agree there; machines with hundreds of nodes etc), then you said the active scanning is useless and then said the whole thing is useless and we're fine with what we have regarding shrinkers debugging. My plan is to work on convert shrinkers API to bytes and experiment with different LRU implementations. I find an ability to easily export statistics and other data (which doesn't exist now) via debugfs useful (and way more convenient than changing existing tracepoints), as well as an ability to trigger scanning of individual shrinkers. If nobody else seeing any value here, I'm fine to keep these patches private, no reason to argue about the output format then. If you (or somebody else) see some value in at least "count" part, I'm happy to answer all questions and incorporate the feedback in the next version. Thank you!
