Hi Nicolas, I found there are several 'lru_add_drain_per_cpu()' worker thread on the NOHZ_FULL CPUs. I am just wondering do you have plan to add support for remote per-cpu LRU pagevec drain ? Thanks, Xiongfeng On 2022/2/8 18:07, Nicolas Saenz Julienne wrote: > This series replaces mm/page_alloc's per-cpu page lists drain mechanism with > one that allows accessing the lists remotely. Currently, only a local CPU is > permitted to change its per-cpu lists, and it's expected to do so, on-demand, > whenever a process demands it by means of queueing a drain task on the local > CPU. This causes problems for NOHZ_FULL CPUs and real-time systems that can't > take any sort of interruption and to some lesser extent inconveniences idle and > virtualised systems. > > The new algorithm will atomically switch the pointer to the per-cpu page lists > and use RCU to make sure it's not being concurrently used before draining the > lists. And its main benefit of is that it fixes the issue for good, avoiding > the need for configuration based heuristics or having to modify applications > (i.e. using the isolation prctrl being worked by Marcello Tosatti ATM). > > All this with minimal performance implications: a page allocation > microbenchmark was run on multiple systems and architectures generally showing > no performance differences, only the more extreme cases showed a 1-3% > degradation. See data below. Needless to say that I'd appreciate if someone > could validate my values independently. > > The approach has been stress-tested: I forced 100 drains/s while running > mmtests' pft in a loop for a full day on multiple machines and archs (arm64, > x86_64, ppc64le). > > Note that this is not the first attempt at fixing this per-cpu page lists: > - The first attempt[1] tried to conditionally change the pagesets locking > scheme based the NOHZ_FULL config. It was deemed hard to maintain as the > NOHZ_FULL code path would be rarely tested. Also, this only solves the issue > for NOHZ_FULL setups, which isn't ideal. > - The second[2] unanimously switched the local_locks to per-cpu spinlocks. The > performance degradation was too big. > > Previous RFC: https://lkml.org/lkml/2021/10/8/793 > > Thanks! > > [1] https://lkml.org/lkml/2021/9/21/599 > [2] https://lkml.org/lkml/2021/11/3/644 > > --- > > Changes since RFC: > - Get rid of aesthetic changes that affected performance > - Add more documentation > - Add better commit messages > - Pass sparse tests > - Verify this_cpu_*() usage > - Performance measurements > > Nicolas Saenz Julienne (2): > mm/page_alloc: Access lists in 'struct per_cpu_pages' indirectly > mm/page_alloc: Add remote draining support to per-cpu lists > > include/linux/mmzone.h | 28 +++++- > mm/page_alloc.c | 212 ++++++++++++++++++++++++++--------------- > mm/vmstat.c | 6 +- > 3 files changed, 162 insertions(+), 84 deletions(-) > > > -------------------------Performance results----------------------------- > > I'm focusing on mmtests' Page Fault Test (pft), as it's page allocator > intensive. > > - AMD Daytona Reference System, 2 sockets, AMD EPYC 7742, Zen 2, 64-Core, > 4 NUMA nodes, x86_64 > > pft timings: > vanilla rcu > Amean system-1 58.52 ( 0.00%) 58.92 * -0.68%* > Amean system-4 61.00 ( 0.00%) 61.41 * -0.67%* > Amean system-7 61.55 ( 0.00%) 61.74 * -0.30%* > Amean system-12 64.91 ( 0.00%) 64.94 * -0.05%* > Amean system-21 98.80 ( 0.00%) 99.92 * -1.13%* > Amean system-30 147.68 ( 0.00%) 145.83 * 1.25%* > Amean system-48 237.04 ( 0.00%) 241.29 * -1.79%* > Amean system-79 286.61 ( 0.00%) 283.72 * 1.01%* > Amean system-110 303.40 ( 0.00%) 299.91 * 1.15%* > Amean system-128 345.07 ( 0.00%) 342.10 * 0.86%* > Amean elapsed-1 61.21 ( 0.00%) 61.65 * -0.71%* > Amean elapsed-4 15.94 ( 0.00%) 16.05 * -0.69%* > Amean elapsed-7 9.24 ( 0.00%) 9.28 * -0.47%* > Amean elapsed-12 5.70 ( 0.00%) 5.70 * -0.07%* > Amean elapsed-21 5.11 ( 0.00%) 5.06 * 1.13%* > Amean elapsed-30 5.28 ( 0.00%) 5.14 * 2.73%* > Amean elapsed-48 5.28 ( 0.00%) 5.24 * 0.74%* > Amean elapsed-79 4.41 ( 0.00%) 4.31 * 2.17%* > Amean elapsed-110 3.45 ( 0.00%) 3.44 * 0.40%* > Amean elapsed-128 2.75 ( 0.00%) 2.75 * -0.28%* > > - AMD Speedway Reference System, 2 sockets, AMD EPYC 7601, Zen 1, 64-core, 8 > NUMA nodes, x86_64. Lots of variance between tests on this platform. It'll > easily swing -+5% on each result. > > pft timings: > vanilla rcu > Amean system-1 69.20 ( 0.00%) 66.21 * 4.32%* > Amean system-4 70.79 ( 0.00%) 69.01 * 2.52%* > Amean system-7 71.34 ( 0.00%) 69.16 * 3.05%* > Amean system-12 74.00 ( 0.00%) 72.74 * 1.70%* > Amean system-21 86.01 ( 0.00%) 85.70 * 0.36%* > Amean system-30 89.21 ( 0.00%) 89.93 * -0.80%* > Amean system-48 92.39 ( 0.00%) 92.43 * -0.04%* > Amean system-79 120.19 ( 0.00%) 121.30 * -0.92%* > Amean system-110 172.79 ( 0.00%) 179.37 * -3.81%* > Amean system-128 201.70 ( 0.00%) 212.57 * -5.39%* > Amean elapsed-1 72.23 ( 0.00%) 69.29 * 4.08%* > Amean elapsed-4 18.69 ( 0.00%) 18.28 * 2.20%* > Amean elapsed-7 10.80 ( 0.00%) 10.54 * 2.41%* > Amean elapsed-12 6.62 ( 0.00%) 6.53 * 1.30%* > Amean elapsed-21 4.68 ( 0.00%) 4.69 * -0.14%* > Amean elapsed-30 3.44 ( 0.00%) 3.50 * -1.66%* > Amean elapsed-48 2.40 ( 0.00%) 2.42 * -1.00%* > Amean elapsed-79 2.05 ( 0.00%) 2.09 * -1.90%* > Amean elapsed-110 1.83 ( 0.00%) 1.91 * -4.60%* > Amean elapsed-128 1.75 ( 0.00%) 1.85 * -5.99%* > > - IBM 9006-22C system, 2 sockets, POWER9, 64-Core, 1 NUMA node per cpu, > pppc64le. > > pft timings: > vanilla rcu > Amean system-1 1.82 ( 0.00%) 1.85 * -1.43%* > Amean system-4 2.18 ( 0.00%) 2.22 * -2.02%* > Amean system-7 3.27 ( 0.00%) 3.28 * -0.15%* > Amean system-12 5.22 ( 0.00%) 5.20 * 0.26%* > Amean system-21 10.10 ( 0.00%) 10.20 * -1.00%* > Amean system-30 15.00 ( 0.00%) 14.52 * 3.20%* > Amean system-48 26.41 ( 0.00%) 25.96 * 1.71%* > Amean system-79 29.35 ( 0.00%) 29.70 * -1.21%* > Amean system-110 24.01 ( 0.00%) 23.40 * 2.54%* > Amean system-128 24.57 ( 0.00%) 25.32 * -3.06%* > Amean elapsed-1 1.85 ( 0.00%) 1.87 * -1.28%* > Amean elapsed-4 0.56 ( 0.00%) 0.57 * -1.72%* > Amean elapsed-7 0.51 ( 0.00%) 0.50 * 0.07%* > Amean elapsed-12 0.51 ( 0.00%) 0.51 * 0.06%* > Amean elapsed-21 0.54 ( 0.00%) 0.54 * 0.06%* > Amean elapsed-30 0.54 ( 0.00%) 0.53 * 2.22%* > Amean elapsed-48 0.58 ( 0.00%) 0.57 * 1.73%* > Amean elapsed-79 0.49 ( 0.00%) 0.48 * 0.89%* > Amean elapsed-110 0.37 ( 0.00%) 0.37 * -1.08%* > Amean elapsed-128 0.33 ( 0.00%) 0.33 * 0.00%* > > - Ampere MtSnow, 1 socket, Neoverse-N1, 80-Cores, 1 NUMA node, arm64. > > pft timings: > vanilla rcu > Amean system-1 11.92 ( 0.00%) 11.99 * -0.61%* > Amean system-4 13.13 ( 0.00%) 13.09 * 0.31%* > Amean system-7 13.91 ( 0.00%) 13.94 * -0.20%* > Amean system-12 15.77 ( 0.00%) 15.69 * 0.48%* > Amean system-21 21.32 ( 0.00%) 21.42 * -0.46%* > Amean system-30 28.58 ( 0.00%) 29.12 * -1.90%* > Amean system-48 47.41 ( 0.00%) 46.91 * 1.04%* > Amean system-79 76.76 ( 0.00%) 77.16 * -0.52%* > Amean system-80 77.98 ( 0.00%) 78.23 * -0.32%* > Amean elapsed-1 12.46 ( 0.00%) 12.53 * -0.58%* > Amean elapsed-4 3.47 ( 0.00%) 3.46 * 0.34%* > Amean elapsed-7 2.18 ( 0.00%) 2.21 * -1.58%* > Amean elapsed-12 1.41 ( 0.00%) 1.42 * -0.80%* > Amean elapsed-21 1.09 ( 0.00%) 1.12 * -2.60%* > Amean elapsed-30 0.98 ( 0.00%) 1.01 * -3.08%* > Amean elapsed-48 1.08 ( 0.00%) 1.10 * -1.78%* > Amean elapsed-79 1.32 ( 0.00%) 1.28 * 2.71%* > Amean elapsed-80 1.32 ( 0.00%) 1.28 * 3.23%* > > - Dell R430, 2 sockets, Intel Xeon E5-2640 v3, Sandy Bridge, 16-Cores, 2 NUMA > nodes, x86_64. > > pft timings: > vanilla rcu > Amean system-1 11.10 ( 0.00%) 11.07 * 0.24%* > Amean system-3 11.14 ( 0.00%) 11.10 * 0.34%* > Amean system-5 11.18 ( 0.00%) 11.13 * 0.47%* > Amean system-7 11.21 ( 0.00%) 11.17 * 0.38%* > Amean system-12 11.28 ( 0.00%) 11.28 ( -0.03%) > Amean system-18 13.24 ( 0.00%) 13.25 * -0.11%* > Amean system-24 17.12 ( 0.00%) 17.14 ( -0.13%) > Amean system-30 21.10 ( 0.00%) 21.23 * -0.60%* > Amean system-32 22.31 ( 0.00%) 22.47 * -0.71%* > Amean elapsed-1 11.76 ( 0.00%) 11.73 * 0.29%* > Amean elapsed-3 3.93 ( 0.00%) 3.93 * 0.17%* > Amean elapsed-5 2.39 ( 0.00%) 2.37 * 0.74%* > Amean elapsed-7 1.72 ( 0.00%) 1.71 * 0.81%* > Amean elapsed-12 1.02 ( 0.00%) 1.03 ( -0.42%) > Amean elapsed-18 1.13 ( 0.00%) 1.14 ( -0.18%) > Amean elapsed-24 0.87 ( 0.00%) 0.88 * -0.65%* > Amean elapsed-30 0.77 ( 0.00%) 0.78 * -0.86%* > Amean elapsed-32 0.74 ( 0.00%) 0.74 ( 0.00%) > > - HPE Apollo 70, 2 sockets, Cavium ThunderX2, 128-Cores, 2 NUMA nodes, arm64. > NOTE: The test here only goes up to 128 for some reason, although there are > 256 CPUs. Maybe a mmtests issue? I didn't investigate. > > pft timings: > vanilla rcu > Amean system-1 4.42 ( 0.00%) 4.36 * 1.29%* > Amean system-4 4.56 ( 0.00%) 4.51 * 1.05%* > Amean system-7 4.63 ( 0.00%) 4.65 * -0.42%* > Amean system-12 5.96 ( 0.00%) 6.02 * -1.00%* > Amean system-21 10.97 ( 0.00%) 11.01 * -0.32%* > Amean system-30 16.01 ( 0.00%) 16.04 * -0.19%* > Amean system-48 26.81 ( 0.00%) 26.78 * 0.09%* > Amean system-79 30.80 ( 0.00%) 30.85 * -0.16%* > Amean system-110 31.87 ( 0.00%) 31.93 * -0.19%* > Amean system-128 36.27 ( 0.00%) 36.31 * -0.10%* > Amean elapsed-1 4.88 ( 0.00%) 4.85 * 0.60%* > Amean elapsed-4 1.27 ( 0.00%) 1.26 * 1.00%* > Amean elapsed-7 0.73 ( 0.00%) 0.74 * -0.46%* > Amean elapsed-12 0.55 ( 0.00%) 0.55 * 1.09%* > Amean elapsed-21 0.59 ( 0.00%) 0.60 * -0.96%* > Amean elapsed-30 0.60 ( 0.00%) 0.60 * 0.28%* > Amean elapsed-48 0.60 ( 0.00%) 0.60 * 0.44%* > Amean elapsed-79 0.49 ( 0.00%) 0.49 * -0.07%* > Amean elapsed-110 0.36 ( 0.00%) 0.36 * 0.28%* > Amean elapsed-128 0.31 ( 0.00%) 0.31 * -0.43%* > > - Raspberry Pi 4, 1 socket, bcm2711, Cortex-A72, 4-Cores, 1 NUMA node, arm64. > > pft timings: > vanilla rcu > Amean system-1 0.67 ( 0.00%) 0.67 * -1.25%* > Amean system-3 1.30 ( 0.00%) 1.29 * 0.62%* > Amean system-4 1.61 ( 0.00%) 1.59 * 0.95%* > Amean elapsed-1 0.71 ( 0.00%) 0.72 * -1.17%* > Amean elapsed-3 0.45 ( 0.00%) 0.45 * 0.88%* > Amean elapsed-4 0.42 ( 0.00%) 0.42 * 1.19%* > >
