RE: [PATCH 00/35] Shadow stacks for userspace

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Edgecombe, Rick P
> Sent: 05 February 2022 20:15
> 
> On Sat, 2022-02-05 at 05:29 -0800, H.J. Lu wrote:
> > On Sat, Feb 5, 2022 at 5:27 AM David Laight <David.Laight@xxxxxxxxxx>
> > wrote:
> > >
> > > From: Edgecombe, Rick P
> > > > Sent: 04 February 2022 01:08
> > > > Hi Thomas,
> > > >
> > > > Thanks for feedback on the plan.
> > > >
> > > > On Thu, 2022-02-03 at 22:07 +0100, Thomas Gleixner wrote:
> > > > > > Until now, the enabling effort was trying to support both
> > > > > > Shadow
> > > > > > Stack and IBT.
> > > > > > This history will focus on a few areas of the shadow stack
> > > > > > development history
> > > > > > that I thought stood out.
> > > > > >
> > > > > >        Signals
> > > > > >        -------
> > > > > >        Originally signals placed the location of the shadow
> > > > > > stack
> > > > > > restore
> > > > > >        token inside the saved state on the stack. This was
> > > > > > problematic from a
> > > > > >        past ABI promises perspective. So the restore location
> > > > > > was
> > > > > > instead just
> > > > > >        assumed from the shadow stack pointer. This works
> > > > > > because in
> > > > > > normal
> > > > > >        allowed cases of calling sigreturn, the shadow stack
> > > > > > pointer
> > > > > > should be
> > > > > >        right at the restore token at that time. There is no
> > > > > > alternate shadow
> > > > > >        stack support. If an alt shadow stack is added later
> > > > > > we
> > > > > > would
> > > > > >        need to
> > > > >
> > > > > So how is that going to work? altstack is not an esoteric
> > > > > corner
> > > > > case.
> > > >
> > > > My understanding is that the main usages for the signal stack
> > > > were
> > > > handling stack overflows and corruption. Since the shadow stack
> > > > only
> > > > contains return addresses rather than large stack allocations,
> > > > and is
> > > > not generally writable or pivotable, I thought there was a good
> > > > possibility an alt shadow stack would not end up being especially
> > > > useful. Does it seem like reasonable guesswork?
> > >
> > > The other 'problem' is that it is valid to longjump out of a signal
> > > handler.
> > > These days you have to use siglongjmp() not longjmp() but it is
> > > still used.
> > >
> > > It is probably also valid to use siglongjmp() to jump from a nested
> > > signal handler into the outer handler.
> > > Given both signal handlers can have their own stack, there can be
> > > three
> > > stacks involved.
> 
> So the scenario is?
> 
> 1. Handle signal 1
> 2. sigsetjmp()
> 3. signalstack()
> 4. Handle signal 2 on alt stack
> 5. siglongjmp()
> 
> I'll check that it is covered by the tests, but I think it should work
> in this series that has no alt shadow stack. I have only done a high
> level overview of how the shadow stack stuff, that doesn't involve the
> kernel, works in glibc. Sounds like I'll need to do a deeper dive.

The posix/xopen definition for setjmp/longjmp doesn't require such
longjmp requests to work.

Although they still have to do something that doesn't break badly.
Aborting the process is probably fine!

> > > I think the shadow stack pointer has to be in ucontext - which also
> > > means the application can change it before returning from a signal.
> 
> Yes we might need to change it to support alt shadow stacks. Can you
> elaborate why you think it has to be in ucontext? I was thinking of
> looking at three options for storing the ssp:
>  - Stored in the shadow stack like a token using WRUSS from the kernel.
>  - Stored on the kernel side using a hashmap that maps ucontext or
>    sigframe userspace address to ssp (this is of course similar to
>    storing in ucontext, except that the user can’t change the ssp).
>  - Stored writable in userspace in ucontext.
> 
> But in this version, without alt shadow stacks, the shadow stack
> pointer is not stored in ucontext. This causes the limitation that
> userspace can only call sigreturn when it has returned back to a point
> where there is a restore token on the shadow stack (which was placed
> there by the kernel). This doesn’t mean it can’t switch to a different
> shadow stack or handle a nested signal, but it limits the possibility
> for calling sigreturn with a totally different sigframe (like CRIU and
> SROP attacks do). It should hopefully be a helpful, protective
> limitation for most apps and I'm hoping CRIU can be fixed without
> removing it.
> 
> I am not aware of other limitations to signals (besides normal shadow
> stack enforcement), but I could be missing it. And people's skepticism
> is making me want to go back over it with more scrutiny.
> 
> > > In much the same way as all the segment registers can be changed
> > > leading to all the nasty bugs when the final 'return to user' code
> > > traps in kernel when loading invalid segment registers or executing
> > > iret.
> 
> I don't think this is as difficult to avoid because userspace ssp has
> its own register that should not be accessed at that point, but I have
> not given this aspect enough analysis. Thanks for bringing it up.

So the user ssp isn't saved (or restored) by the trap entry/exit.
So it needs to be saved by the context switch code?
Much like the user segment registers?
So you are likely to get the same problems if restoring it can fault
in kernel (eg for a non-canonical address).

> > > Hmmm... do shadow stacks mean that longjmp() has to be a system
> > > call?
> >
> > No.  setjmp/longjmp save and restore shadow stack pointer.

Ok, I was thinking that direct access to the user ssp would be
a privileged operation.
If it can be written you don't really have to worry about what code
is trying to do - it can actually do what it likes.
It just catches unintentional operations (like buffer overflows).

Was there any 'spare' space in struct jmpbuf ?
Otherwise you can only enable shadow stacks if everything has been
recompiled - including any shared libraries the might be dlopen()ed.
(or does the compiler invent an alloca() call somehow for a
size that comes back from glibc?)

I've never really considered how setjmp/longjmp handle callee saved
register variables (apart from it being hard).
The original pdp11 implementation probably only needed to save r6 and r7.

What does happen to all the 'extended state' that XSAVE handles?
IIRC all the AVX registers are caller saved (so should probably
be zerod), but some of the SSE ones are callee saved, and one or
two of the fpu flags are sticky and annoying enough the save/restore
at the best of times.

> It sounds like it would help to write up in a lot more detail exactly
> how all the signal and specialer stack manipulation scenarios work in
> glibc.

Some cross references might have made people notice that the ucontext
extensions for AVX512 (if not earlier ones) broke the minimal/default
signal stack size.

	David

-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK
Registration No: 1397386 (Wales)




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux