Re: [PATCH 04/23] membarrier: Make the post-switch-mm barrier explicit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



----- On Jan 8, 2022, at 11:43 AM, Andy Lutomirski luto@xxxxxxxxxx wrote:

> membarrier() needs a barrier after any CPU changes mm.  There is currently
> a comment explaining why this barrier probably exists in all cases. The
> logic is based on ensuring that the barrier exists on every control flow
> path through the scheduler.  It also relies on mmgrab() and mmdrop() being
> full barriers.
> 
> mmgrab() and mmdrop() would be better if they were not full barriers.  As a
> trivial optimization, mmgrab() could use a relaxed atomic and mmdrop()
> could use a release on architectures that have these operations.  Larger
> optimizations are also in the works.  Doing any of these optimizations
> while preserving an unnecessary barrier will complicate the code and
> penalize non-membarrier-using tasks.
> 
> Simplify the logic by adding an explicit barrier, and allow architectures
> to override it as an optimization if they want to.
> 
> One of the deleted comments in this patch said "It is therefore
> possible to schedule between user->kernel->user threads without
> passing through switch_mm()".  It is possible to do this without, say,
> writing to CR3 on x86, but the core scheduler indeed calls
> switch_mm_irqs_off() to tell the arch code to go back from lazy mode
> to no-lazy mode.
> 
> The membarrier_finish_switch_mm() call in exec_mmap() is a no-op so long as
> there is no way for a newly execed program to register for membarrier prior
> to running user code.  Subsequent patches will merge the exec_mmap() code
> with the kthread_use_mm() code, though, and keeping the paths consistent
> will make the result more comprehensible.

I don't agree with the approach here. Adding additional memory barrier overhead
for the sake of possible future optimization work is IMHO not an appropriate
justification for a performance regression.

However I think we can manage to allow forward progress on optimization of
mmgrab/mmdrop without hurting performance.

One possible approach would be to introduce smp_mb__{before,after}_{mmgrab,mmdrop},
which would initially be no-ops. Those could be used by membarrier without
introducing any overhead, and would allow to gradually move the implicit barriers
from mmgrab/mmdrop to smp_mb__{before,after}_{mmgrab,mmdrop} on a per-architecture
basis.

Thanks,

Mathieu


> 
> Cc: Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxxxx>
> Cc: Nicholas Piggin <npiggin@xxxxxxxxx>
> Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
> Signed-off-by: Andy Lutomirski <luto@xxxxxxxxxx>
> ---
> fs/exec.c                |  1 +
> include/linux/sched/mm.h | 18 ++++++++++++++++++
> kernel/kthread.c         | 12 +-----------
> kernel/sched/core.c      | 34 +++++++++-------------------------
> 4 files changed, 29 insertions(+), 36 deletions(-)
> 
> diff --git a/fs/exec.c b/fs/exec.c
> index a098c133d8d7..3abbd0294e73 100644
> --- a/fs/exec.c
> +++ b/fs/exec.c
> @@ -1019,6 +1019,7 @@ static int exec_mmap(struct mm_struct *mm)
> 	activate_mm(active_mm, mm);
> 	if (IS_ENABLED(CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM))
> 		local_irq_enable();
> +	membarrier_finish_switch_mm(mm);
> 	tsk->mm->vmacache_seqnum = 0;
> 	vmacache_flush(tsk);
> 	task_unlock(tsk);
> diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
> index 0df706c099e5..e8919995d8dd 100644
> --- a/include/linux/sched/mm.h
> +++ b/include/linux/sched/mm.h
> @@ -349,6 +349,20 @@ extern void membarrier_exec_mmap(struct mm_struct *mm);
> 
> extern void membarrier_update_current_mm(struct mm_struct *next_mm);
> 
> +/*
> + * Called by the core scheduler after calling switch_mm_irqs_off().
> + * Architectures that have implicit barriers when switching mms can
> + * override this as an optimization.
> + */
> +#ifndef membarrier_finish_switch_mm
> +static inline void membarrier_finish_switch_mm(struct mm_struct *mm)
> +{
> +	if (atomic_read(&mm->membarrier_state) &
> +	    (MEMBARRIER_STATE_GLOBAL_EXPEDITED | MEMBARRIER_STATE_PRIVATE_EXPEDITED))
> +		smp_mb();
> +}
> +#endif
> +
> #else
> static inline void membarrier_exec_mmap(struct mm_struct *mm)
> {
> @@ -356,6 +370,10 @@ static inline void membarrier_exec_mmap(struct mm_struct
> *mm)
> static inline void membarrier_update_current_mm(struct mm_struct *next_mm)
> {
> }
> +static inline void membarrier_finish_switch_mm(struct mm_struct *mm)
> +{
> +}
> +
> #endif
> 
> #endif /* _LINUX_SCHED_MM_H */
> diff --git a/kernel/kthread.c b/kernel/kthread.c
> index 5b37a8567168..396ae78a1a34 100644
> --- a/kernel/kthread.c
> +++ b/kernel/kthread.c
> @@ -1361,25 +1361,15 @@ void kthread_use_mm(struct mm_struct *mm)
> 	tsk->mm = mm;
> 	membarrier_update_current_mm(mm);
> 	switch_mm_irqs_off(active_mm, mm, tsk);
> +	membarrier_finish_switch_mm(mm);
> 	local_irq_enable();
> 	task_unlock(tsk);
> #ifdef finish_arch_post_lock_switch
> 	finish_arch_post_lock_switch();
> #endif
> 
> -	/*
> -	 * When a kthread starts operating on an address space, the loop
> -	 * in membarrier_{private,global}_expedited() may not observe
> -	 * that tsk->mm, and not issue an IPI. Membarrier requires a
> -	 * memory barrier after storing to tsk->mm, before accessing
> -	 * user-space memory. A full memory barrier for membarrier
> -	 * {PRIVATE,GLOBAL}_EXPEDITED is implicitly provided by
> -	 * mmdrop(), or explicitly with smp_mb().
> -	 */
> 	if (active_mm != mm)
> 		mmdrop(active_mm);
> -	else
> -		smp_mb();
> 
> 	to_kthread(tsk)->oldfs = force_uaccess_begin();
> }
> diff --git a/kernel/sched/core.c b/kernel/sched/core.c
> index 6a1db8264c7b..917068b0a145 100644
> --- a/kernel/sched/core.c
> +++ b/kernel/sched/core.c
> @@ -4824,14 +4824,6 @@ static struct rq *finish_task_switch(struct task_struct
> *prev)
> 	fire_sched_in_preempt_notifiers(current);
> 
> 	/*
> -	 * When switching through a kernel thread, the loop in
> -	 * membarrier_{private,global}_expedited() may have observed that
> -	 * kernel thread and not issued an IPI. It is therefore possible to
> -	 * schedule between user->kernel->user threads without passing though
> -	 * switch_mm(). Membarrier requires a barrier after storing to
> -	 * rq->curr, before returning to userspace, and mmdrop() provides
> -	 * this barrier.
> -	 *
> 	 * If an architecture needs to take a specific action for
> 	 * SYNC_CORE, it can do so in switch_mm_irqs_off().
> 	 */
> @@ -4915,15 +4907,14 @@ context_switch(struct rq *rq, struct task_struct *prev,
> 			prev->active_mm = NULL;
> 	} else {                                        // to user
> 		membarrier_switch_mm(rq, prev->active_mm, next->mm);
> +		switch_mm_irqs_off(prev->active_mm, next->mm, next);
> +
> 		/*
> 		 * sys_membarrier() requires an smp_mb() between setting
> -		 * rq->curr / membarrier_switch_mm() and returning to userspace.
> -		 *
> -		 * The below provides this either through switch_mm(), or in
> -		 * case 'prev->active_mm == next->mm' through
> -		 * finish_task_switch()'s mmdrop().
> +		 * rq->curr->mm to a membarrier-enabled mm and returning
> +		 * to userspace.
> 		 */
> -		switch_mm_irqs_off(prev->active_mm, next->mm, next);
> +		membarrier_finish_switch_mm(next->mm);
> 
> 		if (!prev->mm) {                        // from kernel
> 			/* will mmdrop() in finish_task_switch(). */
> @@ -6264,17 +6255,10 @@ static void __sched notrace __schedule(unsigned int
> sched_mode)
> 		RCU_INIT_POINTER(rq->curr, next);
> 		/*
> 		 * The membarrier system call requires each architecture
> -		 * to have a full memory barrier after updating
> -		 * rq->curr, before returning to user-space.
> -		 *
> -		 * Here are the schemes providing that barrier on the
> -		 * various architectures:
> -		 * - mm ? switch_mm() : mmdrop() for x86, s390, sparc, PowerPC.
> -		 *   switch_mm() rely on membarrier_arch_switch_mm() on PowerPC.
> -		 * - finish_lock_switch() for weakly-ordered
> -		 *   architectures where spin_unlock is a full barrier,
> -		 * - switch_to() for arm64 (weakly-ordered, spin_unlock
> -		 *   is a RELEASE barrier),
> +		 * to have a full memory barrier before and after updating
> +		 * rq->curr->mm, before returning to userspace.  This
> +		 * is provided by membarrier_finish_switch_mm().  Architectures
> +		 * that want to optimize this can override that function.
> 		 */
> 		++*switch_count;
> 
> --
> 2.33.1

-- 
Mathieu Desnoyers
EfficiOS Inc.
http://www.efficios.com




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux