On Wed, Oct 20, 2021 at 11:13:06AM +0100, Catalin Marinas wrote:
> On Wed, Oct 20, 2021 at 10:38:23AM +0300, Mike Rapoport wrote:
> > On Tue, Oct 19, 2021 at 09:33:11PM +0300, Mike Rapoport wrote:
> > > On Tue, Oct 19, 2021 at 01:59:22PM -0400, Qian Cai wrote:
> > > > [ 0.000000][ T0] Booting Linux on physical CPU 0x0000000000 [0x503f0002]
> > > > [ 0.000000][ T0] Linux version 5.15.0-rc6-next-20211019+ (root@admin5) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #104 SMP Tue Oct 19 17:36:17 UTC 2021
> > > > [ 0.000000][ T0] earlycon: pl11 at MMIO32 0x0000000012600000 (options '')
> > > > [ 0.000000][ T0] printk: bootconsole [pl11] enabled
> > > > [ 0.000000][ T0] efi: Getting UEFI parameters from /chosen in DT:
> > > > [ 0.000000][ T0] efi: System Table : 0x0000009ff7de0018
> > > > [ 0.000000][ T0] efi: MemMap Address : 0x0000009fe6dae018
> > > > [ 0.000000][ T0] efi: MemMap Size : 0x0000000000000600
> > > > [ 0.000000][ T0] efi: MemMap Desc. Size : 0x0000000000000030
> > > > [ 0.000000][ T0] efi: MemMap Desc. Version : 0x0000000000000001
> > > > [ 0.000000][ T0] efi: EFI v2.70 by American Megatrends
> > > > [ 0.000000][ T0] efi: ACPI 2.0=0x9ff5b40000 SMBIOS 3.0=0x9ff686fd98 ESRT=0x9ff1d18298 MEMRESERVE=0x9fe6dacd98
> > > > [ 0.000000][ T0] efi: Processing EFI memory map:
> > > > [ 0.000000][ T0] efi: 0x000090000000-0x000091ffffff [Conventional| | | | | | | | | | |WB|WT|WC|UC]
> > > > [ 0.000000][ T0] efi: 0x000092000000-0x0000928fffff [Runtime Data|RUN| | | | | | | | | |WB|WT|WC|UC]
> > > > [ 0.000000][ T0] ------------[ cut here ]------------
> > > > [ 0.000000][ T0] kernel BUG at mm/kmemleak.c:1140!
> > > > [ 0.000000][ T0] Internal error: Oops - BUG: 0 [#1] SMP
> > > >
> > > > I did not quite figure out where this BUG() was triggered and I did not
> > >
> > > This is from here:
> > > arch/arm64/include/asm/memory.h:
> > >
> > > #define PHYS_OFFSET ({ VM_BUG_ON(memstart_addr & 1); memstart_addr; })
> > >
> > > kmemleak_free_part_phys() does __va() which uses PHYS_OFFSET and all this
> > > happens before memstart_addr is set.
> > >
> > > I'll try to see how this can be untangled...
> >
> > This late in the cycle I can only think of reverting kmemleak wavier from
> > memblock_mark_nomap() and putting it in
> > early_init_dt_alloc_reserved_memory_arch() being the only user setting
> > MEMBLOCK_NOMAP to an allocated chunk rather than marking NOMAP "unusable"
> > memory reported by firmware.
>
> BTW, would something like this work:
>
> diff --git a/mm/memblock.c b/mm/memblock.c
> index aa87ff5ae2a4..7e67378a8ddf 100644
> --- a/mm/memblock.c
> +++ b/mm/memblock.c
> @@ -939,7 +939,7 @@ int __init_memblock memblock_mark_nomap(phys_addr_t base, phys_addr_t size)
> {
> int ret = memblock_setclr_flag(base, size, 1, MEMBLOCK_NOMAP);
>
> - if (!ret)
> + if (!ret && memblock_is_region_reserved(base, size))
> kmemleak_free_part_phys(base, size);
Apparently it would for the cases we have now.
But it will fail same way as now if somebody will call memblock_reserve() and then
memblock_mark_nomap() for the same chunk before arm64_memblock_init().
For instance, slight order change in efi-init::reserve_regions() will
trigger the same fault... :(
--
Sincerely yours,
Mike.
