[AMD Official Use Only]
The bandwidth is limited by underutilization of cross socket links and not the latency. Hotspotting on one node will not engage all hardware resources based on our routing protocol which results in the lower bandwidth. Distributing equally across nodes 0 and 1 will yield the best results as it stresses the full system capabilities.
Thanks
Krupa Ramakrishnan
-----Original Message-----
From: Anshuman Khandual <anshuman.khandual@xxxxxxx>
Sent: 31 August, 2021 4:58
To: Rao, Bharata Bhasker <bharata@xxxxxxx>; linux-mm@xxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
Cc: akpm@xxxxxxxxxxxxxxxxxxxx; kamezawa.hiroyu@xxxxxxxxxxxxxx; lee.schermerhorn@xxxxxx; mgorman@xxxxxxx; Ramakrishnan, Krupa <Krupa.Ramakrishnan@xxxxxxx>; Srinivasan, Sadagopan <Sadagopan.Srinivasan@xxxxxxx>
Subject: Re: [FIX PATCH 2/2] mm/page_alloc: Use accumulated load when building node fallback list
[CAUTION: External Email]
On 8/30/21 5:46 PM, Bharata B Rao wrote:
> As an example, consider a 4 node system with the following distance
> matrix.
>
> Node 0 1 2 3
> ----------------
> 0 10 12 32 32
> 1 12 10 32 32
> 2 32 32 10 12
> 3 32 32 12 10
>
> For this case, the node fallback list gets built like this:
>
> Node Fallback list
> ---------------------
> 0 0 1 2 3
> 1 1 0 3 2
> 2 2 3 0 1
> 3 3 2 0 1 <-- Unexpected fallback order
>
> In the fallback list for nodes 2 and 3, the nodes 0 and 1 appear in
> the same order which results in more allocations getting satisfied
> from node 0 compared to node 1.
>
> The effect of this on remote memory bandwidth as seen by stream
> benchmark is shown below:
>
> Case 1: Bandwidth from cores on nodes 2 & 3 to memory on nodes 0 & 1
> (numactl -m 0,1 ./stream_lowOverhead ... --cores <from 2, 3>)
> Case 2: Bandwidth from cores on nodes 0 & 1 to memory on nodes 2 & 3
> (numactl -m 2,3 ./stream_lowOverhead ... --cores <from 0, 1>)
>
> ----------------------------------------
> BANDWIDTH (MB/s)
> TEST Case 1 Case 2
> ----------------------------------------
> COPY 57479.6 110791.8
> SCALE 55372.9 105685.9
> ADD 50460.6 96734.2
> TRIADD 50397.6 97119.1
> ----------------------------------------
>
> The bandwidth drop in Case 1 occurs because most of the allocations
> get satisfied by node 0 as it appears first in the fallback order for
> both nodes 2 and 3.
I am wondering what causes this performance drop here ? Would not the memory access latency be similar between {2, 3} ---> { 0 } and {2, 3} ---> { 1 }, given both these nodes {0, 1} have same distance from {2, 3} i.e 32 from the above distance matrix. Even if the preferred node order changes from { 0 } to { 1 } for the accessing node { 3 }, it should not change the latency as such.
Is the performance drop here, is caused by excessive allocation on node { 0 } resulting from page allocation latency instead.
