Re: [PATCH Part1 v5 34/38] x86/sev: Add snp_msg_seqno() helper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 8/27/21 1:41 PM, Borislav Petkov wrote:
On Fri, Aug 20, 2021 at 10:19:29AM -0500, Brijesh Singh wrote:
The SNP guest request message header contains a message count. The
message count is used while building the IV. The PSP firmware increments
the message count by 1, and expects that next message will be using the
incremented count. The snp_msg_seqno() helper will be used by driver to
get the message sequence counter used in the request message header,
and it will be automatically incremented after the request is successful.
The incremented value is saved in the secrets page so that the kexec'ed
kernel knows from where to begin.

Signed-off-by: Brijesh Singh <brijesh.singh@xxxxxxx>
---
  arch/x86/kernel/sev.c     | 79 +++++++++++++++++++++++++++++++++++++++
  include/linux/sev-guest.h | 37 ++++++++++++++++++
  2 files changed, 116 insertions(+)

diff --git a/arch/x86/kernel/sev.c b/arch/x86/kernel/sev.c
index 319a40fc57ce..f42cd5a8e7bb 100644
--- a/arch/x86/kernel/sev.c
+++ b/arch/x86/kernel/sev.c
@@ -51,6 +51,8 @@ static struct ghcb boot_ghcb_page __bss_decrypted __aligned(PAGE_SIZE);
   */
  static struct ghcb __initdata *boot_ghcb;

Explain what that is in a comment above it.

+static u64 snp_secrets_phys;

snp_secrets_pa;

is the usual convention when a variable is supposed to contain a
physical address.


Noted.

+
  /* #VC handler runtime per-CPU data */
  struct sev_es_runtime_data {
  	struct ghcb ghcb_page;
@@ -2030,6 +2032,80 @@ bool __init handle_vc_boot_ghcb(struct pt_regs *regs)
  		halt();
  }
+static struct snp_secrets_page_layout *snp_map_secrets_page(void)
+{
+	u16 __iomem *secrets;
+
+	if (!snp_secrets_phys || !sev_feature_enabled(SEV_SNP))
+		return NULL;
+
+	secrets = ioremap_encrypted(snp_secrets_phys, PAGE_SIZE);
+	if (!secrets)
+		return NULL;
+
+	return (struct snp_secrets_page_layout *)secrets;
+}

Or simply:

static struct snp_secrets_page_layout *map_secrets_page(void)
{
         if (!snp_secrets_phys || !sev_feature_enabled(SEV_SNP))
                 return NULL;
return ioremap_encrypted(snp_secrets_phys, PAGE_SIZE);
}

?


Yes that also works.

+
+static inline u64 snp_read_msg_seqno(void)

Drop that "snp_" prefix from all those static function names. This one
is even inline, which means its name doesn't matter at all.

+{
+	struct snp_secrets_page_layout *layout;
+	u64 count;
+
+	layout = snp_map_secrets_page();
+	if (!layout)
+		return 0;
+
+	/* Read the current message sequence counter from secrets pages */
+	count = readl(&layout->os_area.msg_seqno_0);
+
+	iounmap(layout);
+
+	/* The sequence counter must begin with 1 */

That sounds weird. Why? 0 is special?

The SNP firmware spec says that counter must begin with the 1.


+	if (!count)
+		return 1;
+
+	return count + 1;
+}
+
+u64 snp_msg_seqno(void)

Function name needs a verb. I.e.,

	 snp_get_msg_seqno()

Ok.

+{
+	u64 count = snp_read_msg_seqno();
+
+	if (unlikely(!count))

That looks like a left-over from a previous version as it can't happen.

Or are you handling the case where the u64 count will wraparound to 0?

But "The sequence counter must begin with 1" so that read function above
needs more love.


Yes, I will cleanup a bit more.

+		return 0;


+
+	/*
+	 * The message sequence counter for the SNP guest request is a
+	 * 64-bit value but the version 2 of GHCB specification defines a
+	 * 32-bit storage for the it.
+	 */
+	if (count >= UINT_MAX)
+		return 0;

Huh, WTF? So when the internal counter goes over u32, this function will
return 0 only? More weird.


During the GHCB writing the seqno use to be 32-bit value and hence the GHCB spec choose the 32-bit value but recently the SNP firmware changed it from the 32 to 64. So, now we are left with the option of limiting the sequence number to 32-bit. If we go beyond 32-bit then all we can do is fail the call. If we pass the value of zero then FW will fail the call.



+
+	return count;
+}
+EXPORT_SYMBOL_GPL(snp_msg_seqno);
+
+static void snp_gen_msg_seqno(void)

That's not "gen" - that's "inc" what this function does. IOW,

	snp_inc_msg_seqno


I agree. I will update it.

+{
+	struct snp_secrets_page_layout *layout;
+	u64 count;
+
+	layout = snp_map_secrets_page();
+	if (!layout)
+		return;
+
+	/*
+	 * The counter is also incremented by the PSP, so increment it by 2
+	 * and save in secrets page.
+	 */
+	count = readl(&layout->os_area.msg_seqno_0);
+	count += 2;
+
+	writel(count, &layout->os_area.msg_seqno_0);
+	iounmap(layout);

Why does this need to constantly map and unmap the secrets page? Why
don't you map it once on init and unmap it on exit?


Yes, I can remove that with:

secrets_va = (__force void *)ioremap_encrypted(pa...)

And then use secrets_va instead of doing readl/writel.

+}
+
  int snp_issue_guest_request(int type, struct snp_guest_request_data *input, unsigned long *fw_err)
  {
  	struct ghcb_state state;
@@ -2077,6 +2153,9 @@ int snp_issue_guest_request(int type, struct snp_guest_request_data *input, unsi
  		ret = -EIO;
  	}
+ /* The command was successful, increment the sequence counter */
+	snp_gen_msg_seqno();
+
  e_put:
  	__sev_put_ghcb(&state);
  e_restore_irq:
diff --git a/include/linux/sev-guest.h b/include/linux/sev-guest.h
index 24dd17507789..16b6af24fda7 100644
--- a/include/linux/sev-guest.h
+++ b/include/linux/sev-guest.h
@@ -20,6 +20,41 @@ enum vmgexit_type {
  	GUEST_REQUEST_MAX
  };
+/*
+ * The secrets page contains 96-bytes of reserved field that can be used by
+ * the guest OS. The guest OS uses the area to save the message sequence
+ * number for each VMPCK.
+ *
+ * See the GHCB spec section Secret page layout for the format for this area.
+ */
+struct secrets_os_area {
+	u32 msg_seqno_0;
+	u32 msg_seqno_1;
+	u32 msg_seqno_2;
+	u32 msg_seqno_3;
+	u64 ap_jump_table_pa;
+	u8 rsvd[40];
+	u8 guest_usage[32];
+} __packed;

So those are differently named there:

struct secrets_page_os_area {
	uint32 vmpl0_message_seq_num;
	uint32 vmpl1_message_seq_num;
	...

and they have "vmpl" in there which makes a lot more sense for that
they're used than msg_seqno_* does.


I just choose the smaller name but I have no issues matching with the spec. Also those keys does not have anything to do with the VMPL level. The secrets page provides 4 different keys and they are referred as vmpck0..3 and each of them have a sequence numbers associated with it.

In GHCB v3 we probably need to rework the structure name.

+
+#define VMPCK_KEY_LEN		32
+
+/* See the SNP spec for secrets page format */
+struct snp_secrets_page_layout {

Simply

	struct snp_secrets

That name says all you need to know about what that struct represents.

+	u32 version;
+	u32 imien	: 1,
+	    rsvd1	: 31;
+	u32 fms;
+	u32 rsvd2;
+	u8 gosvw[16];
+	u8 vmpck0[VMPCK_KEY_LEN];
+	u8 vmpck1[VMPCK_KEY_LEN];
+	u8 vmpck2[VMPCK_KEY_LEN];
+	u8 vmpck3[VMPCK_KEY_LEN];
+	struct secrets_os_area os_area;

My SNP spec copy has here

0A0h–FFFh	Reserved.

and no os area. I guess

SEV Secure Nested Paging Firmware ABI Specification 56860 Rev. 0.8 August 2020

needs updating...

The latest SNP spec here:

https://www.amd.com/system/files/TechDocs/56860.pdf

We are at spec 0.9.


+	u8 rsvd3[3840];
+} __packed;
+
  /*
   * The error code when the data_npages is too small. The error code
   * is defined in the GHCB specification.
@@ -36,6 +71,7 @@ struct snp_guest_request_data {
  #ifdef CONFIG_AMD_MEM_ENCRYPT
  int snp_issue_guest_request(int vmgexit_type, struct snp_guest_request_data *input,
  			    unsigned long *fw_err);
+u64 snp_msg_seqno(void);
  #else
static inline int snp_issue_guest_request(int type, struct snp_guest_request_data *input,
@@ -43,6 +79,7 @@ static inline int snp_issue_guest_request(int type, struct snp_guest_request_dat
  {
  	return -ENODEV;
  }
+static inline u64 snp_msg_seqno(void) { return 0; }
#endif /* CONFIG_AMD_MEM_ENCRYPT */
  #endif /* __LINUX_SEV_GUEST_H__ */
--
2.17.1







[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux