Re: [PATCH] mm/swap: consider max pages in iomap_swapfile_add_extent

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 19, 2021 at 08:59:22AM +0800, Yu Xu wrote:
> On 8/19/21 1:01 AM, Darrick J. Wong wrote:
> > On Wed, Aug 18, 2021 at 07:36:51PM +0800, Xu Yu wrote:
> > > When the max pages (last_page in the swap header + 1) is smaller than
> > > the total pages (inode size) of the swapfile, iomap_swapfile_activate
> > > overwrites sis->max with total pages.
> > > 
> > > However, frontswap_map is allocated using max pages, but cleared using
> > > sis->max in __frontswap_invalidate_area(). The consequence is that the
> > > neighbors of frontswap_map bitmap may be overwritten, and then slab is
> > > polluted.
> > > 
> > > This fixes the issue by considering the limitation of max pages of swap
> > > info in iomap_swapfile_add_extent().
> > > 
> > > To reproduce the case, compile kernel with slub RED ZONE, then run test:
> > > $ sudo stress-ng -a 1 -x softlockup,resources -t 72h --metrics --times \
> > >   --verify -v -Y /root/tmpdir/stress-ng/stress-statistic-12.yaml \
> > >   --log-file /root/tmpdir/stress-ng/stress-logfile-12.txt \
> > >   --temp-path /root/tmpdir/stress-ng/
> 
> Hi, Darrick J. Wong,
> 
> This is the stress-ng test script from our nightly test, I just copied
> as it is.
> 
> > 
> > 72 hours?  That's not really a targeted reproducer test.
> 
> Actually, the system crashes soon, in less than 5 minutes on average.

Hehe.

I'm about to send out a regression fstest that (I think!) reproduces the
validation error.  Would you mind running it in your environment to
confirm that it trips the same memory debugger warning?

Also ccing the btrfs list because the regression test fails on btrfs in
the same way that iomap failed. :(

--D

> > 
> > Oh, very interesting!  maxpages comes from the swap header.
> > 
> > # fallocate -l 100m /mnt/a
> > # mkswap /mnt/a
> > mkswap: /mnt/a: insecure permissions 0644, 0600 suggested.
> > Setting up swapspace version 1, size = 100 MiB (104853504 bytes)
> > no label, UUID=c6c93d94-3b91-47cc-9684-9c0edbd04759
> > # swapon /mnt/a
> > swapon: /mnt/a: insecure permissions 0644, 0600 suggested.
> > [   68.267848] Adding 102396k swap on /mnt/a.  Priority:-2 extents:1 across:102396k SS
> > 
> > 
> > Ok, ~100M of swap...
> > 
> > # swapoff /mnt/a
> > # fallocate -l 200m /mnt/a
> > # swapon /mnt/a
> > swapon: /mnt/a: insecure permissions 0644, 0600 suggested.
> > [   84.458713] Adding 204796k swap on /mnt/a.  Priority:-2 extents:1 across:204796k SS
> > 
> > Huh.  200MB of swap, even though we haven't touched the swap header:
> > 
> > # dd if=/mnt/a bs=4096 count=1 | od -tx1 -Ad -c
> > 0000000  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
> >           \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0
> > *
> > 0001024  01  00  00  00  ff  63  00  00  00  00  00  00  66  40  eb  42
> >          001  \0  \0  \0 377   c  \0  \0  \0  \0  \0  \0   f   @ 353   B
> > 
> > Version 1 swap header, 0x63ff pages (~102396kb), 0 bad pages...
> > 
> > 0001040  8e  81  4e  4e  92  a1  f9  98  d9  43  2f  cc  00  00  00  00
> >          216 201   N   N 222 241 371 230 331   C   / 314  \0  \0  \0  \0
> > 0001056  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
> >           \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0
> > *
> > 0004080  00  00  00  00  00  00  53  57  41  50  53  50  41  43  45  32
> >           \0  \0  \0  \0  \0  \0   S   W   A   P   S   P   A   C   E   2
> > 0004096
> > 
> > So yes, iomap_swapfile_* is incorrect.  Even better, we have a targeted
> > way to test this now. :)
> 
> Yes, this is more straightforward.  I used to focus on the slab
> corruption too much.
> 
> > 
> > > We'll get the error log as below:
> > > 
> > > [ 1151.015141] =============================================================================
> > > [ 1151.016489] BUG kmalloc-16 (Not tainted): Right Redzone overwritten
> > > [ 1151.017486] -----------------------------------------------------------------------------
> > > [ 1151.017486]
> > > [ 1151.018997] Disabling lock debugging due to kernel taint
> > > [ 1151.019873] INFO: 0x0000000084e43932-0x0000000098d17cae @offset=7392. First byte 0x0 instead of 0xcc
> > > [ 1151.021303] INFO: Allocated in __do_sys_swapon+0xcf6/0x1170 age=43417 cpu=9 pid=3816
> > > [ 1151.022538]  __slab_alloc+0xe/0x20
> > > [ 1151.023069]  __kmalloc_node+0xfd/0x4b0
> > > [ 1151.023704]  __do_sys_swapon+0xcf6/0x1170
> > > [ 1151.024346]  do_syscall_64+0x33/0x40
> > > [ 1151.024925]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
> > > [ 1151.025749] INFO: Freed in put_cred_rcu+0xa1/0xc0 age=43424 cpu=3 pid=2041
> > > [ 1151.026889]  kfree+0x276/0x2b0
> > > [ 1151.027405]  put_cred_rcu+0xa1/0xc0
> > > [ 1151.027949]  rcu_do_batch+0x17d/0x410
> > > [ 1151.028566]  rcu_core+0x14e/0x2b0
> > > [ 1151.029084]  __do_softirq+0x101/0x29e
> > > [ 1151.029645]  asm_call_irq_on_stack+0x12/0x20
> > > [ 1151.030381]  do_softirq_own_stack+0x37/0x40
> > > [ 1151.031037]  do_softirq.part.15+0x2b/0x30
> > > [ 1151.031710]  __local_bh_enable_ip+0x4b/0x50
> > > [ 1151.032412]  copy_fpstate_to_sigframe+0x111/0x360
> > > [ 1151.033197]  __setup_rt_frame+0xce/0x480
> > > [ 1151.033809]  arch_do_signal+0x1a3/0x250
> > > [ 1151.034463]  exit_to_user_mode_prepare+0xcf/0x110
> > > [ 1151.035242]  syscall_exit_to_user_mode+0x27/0x190
> > > [ 1151.035970]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
> > > [ 1151.036795] INFO: Slab 0x000000003b9de4dc objects=44 used=9 fp=0x00000000539e349e flags=0xfffffc0010201
> > > [ 1151.038323] INFO: Object 0x000000004855ba01 @offset=7376 fp=0x0000000000000000
> > > [ 1151.038323]
> > > [ 1151.039683] Redzone  000000008d0afd3d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > > [ 1151.041180] Object   000000004855ba01: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
> > > [ 1151.042714] Redzone  0000000084e43932: 00 00 00 c0 cc cc cc cc                          ........
> > > [ 1151.044120] Padding  000000000864c042: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
> > > [ 1151.045615] CPU: 5 PID: 3816 Comm: stress-ng Tainted: G    B             5.10.50+ #7
> > > [ 1151.046846] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
> > > [ 1151.048633] Call Trace:
> > > [ 1151.049072]  dump_stack+0x57/0x6a
> > > [ 1151.049585]  check_bytes_and_report+0xed/0x110
> > > [ 1151.050320]  check_object+0x1eb/0x290
> > > [ 1151.050924]  ? __x64_sys_swapoff+0x39a/0x540
> > > [ 1151.051646]  free_debug_processing+0x151/0x350
> > > [ 1151.052333]  __slab_free+0x21a/0x3a0
> > > [ 1151.052938]  ? _cond_resched+0x2d/0x40
> > > [ 1151.053529]  ? __vunmap+0x1de/0x220
> > > [ 1151.054139]  ? __x64_sys_swapoff+0x39a/0x540
> > > [ 1151.054796]  ? kfree+0x276/0x2b0
> > > [ 1151.055307]  kfree+0x276/0x2b0
> > > [ 1151.055832]  __x64_sys_swapoff+0x39a/0x540
> > > [ 1151.056466]  do_syscall_64+0x33/0x40
> > > [ 1151.057084]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
> > > [ 1151.057866] RIP: 0033:0x150340b0ffb7
> > > [ 1151.058481] Code: Unable to access opcode bytes at RIP 0x150340b0ff8d.
> > > [ 1151.059537] RSP: 002b:00007fff7f4ee238 EFLAGS: 00000246 ORIG_RAX: 00000000000000a8
> > > [ 1151.060768] RAX: ffffffffffffffda RBX: 00007fff7f4ee66c RCX: 0000150340b0ffb7
> > > [ 1151.061904] RDX: 000000000000000a RSI: 0000000000018094 RDI: 00007fff7f4ee860
> > > [ 1151.063033] RBP: 00007fff7f4ef980 R08: 0000000000000000 R09: 0000150340a672bd
> > > [ 1151.064135] R10: 00007fff7f4edca0 R11: 0000000000000246 R12: 0000000000018094
> > > [ 1151.065253] R13: 0000000000000005 R14: 000000000160d930 R15: 00007fff7f4ee66c
> > > [ 1151.066413] FIX kmalloc-16: Restoring 0x0000000084e43932-0x0000000098d17cae=0xcc
> > > [ 1151.066413]
> > > [ 1151.067890] FIX kmalloc-16: Object at 0x000000004855ba01 not freed
> > > 
> > > Fixes: 0e6895ba00b7 ("ext4: implement swap_activate aops using iomap")
> > > Signed-off-by: Gang Deng <gavin.dg@xxxxxxxxxxxxxxxxx>
> > > Signed-off-by: Xu Yu <xuyu@xxxxxxxxxxxxxxxxx>
> > 
> > Looks good; I'll cc you both when I send out the regression test.
> > Reviewed-by: Darrick J. Wong <djwong@xxxxxxxxxx>
> > 
> > --D
> > 
> > > ---
> > >   fs/iomap/swapfile.c | 6 ++++++
> > >   1 file changed, 6 insertions(+)
> > > 
> > > diff --git a/fs/iomap/swapfile.c b/fs/iomap/swapfile.c
> > > index 6250ca6a1f85..4ecf4e1f68ef 100644
> > > --- a/fs/iomap/swapfile.c
> > > +++ b/fs/iomap/swapfile.c
> > > @@ -31,11 +31,16 @@ static int iomap_swapfile_add_extent(struct iomap_swapfile_info *isi)
> > >   {
> > >   	struct iomap *iomap = &isi->iomap;
> > >   	unsigned long nr_pages;
> > > +	unsigned long max_pages;
> > >   	uint64_t first_ppage;
> > >   	uint64_t first_ppage_reported;
> > >   	uint64_t next_ppage;
> > >   	int error;
> > > +	if (unlikely(isi->nr_pages >= isi->sis->max))
> > > +		return 0;
> > > +	max_pages = isi->sis->max - isi->nr_pages;
> > > +
> > >   	/*
> > >   	 * Round the start up and the end down so that the physical
> > >   	 * extent aligns to a page boundary.
> > > @@ -48,6 +53,7 @@ static int iomap_swapfile_add_extent(struct iomap_swapfile_info *isi)
> > >   	if (first_ppage >= next_ppage)
> > >   		return 0;
> > >   	nr_pages = next_ppage - first_ppage;
> > > +	nr_pages = min(nr_pages, max_pages);
> > >   	/*
> > >   	 * Calculate how much swap space we're adding; the first page contains
> > > -- 
> > > 2.20.1.2432.ga663e714
> > > 
> 
> -- 
> Thanks,
> Yu




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux