Re: [PATCH v1] mm: Add configuration to control whether vmpressure notifier is enabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



在 2021/8/13 下午7:57, yongw.pur@xxxxxxxxx 写道:
> From: wangyong <wang.yong12@xxxxxxxxxx>
>
> Inspired by PSI features, vmpressure inotifier function should also be
> configured to decide whether it is used, because it is an independent
> feature which notifies the user of memory pressure.
>
> Since the vmpressure interface is used in kernel common code, for
> users who do not use the vmpressure function, there will be
> additional overhead.
>
> So we add configuration to control whether vmpressure notifier is
> enabled, and provide a boot parameter to use use vmpressure notifier
> flexibly
>
> Signed-off-by: wangyong <wang.yong12@xxxxxxxxxx>
> ---
>  Documentation/admin-guide/cgroup-v1/memory.rst  |  3 ++-
>  Documentation/admin-guide/kernel-parameters.txt |  3 +++
>  include/linux/memcontrol.h                      |  2 ++
>  include/linux/vmpressure.h                      |  7 +++++--
>  init/Kconfig                                    | 20 +++++++++++++++++++
>  mm/Makefile                                     |  3 ++-
>  mm/memcontrol.c                                 |  7 ++++++-
>  mm/vmpressure.c                                 | 26 +++++++++++++++++++++++++
>  8 files changed, 66 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/admin-guide/cgroup-v1/memory.rst b/Documentation/admin-guide/cgroup-v1/memory.rst
> index 41191b5..967418a 100644
> --- a/Documentation/admin-guide/cgroup-v1/memory.rst
> +++ b/Documentation/admin-guide/cgroup-v1/memory.rst
> @@ -388,6 +388,7 @@ a. Enable CONFIG_CGROUPS
>  b. Enable CONFIG_MEMCG
>  c. Enable CONFIG_MEMCG_SWAP (to use swap extension)
>  d. Enable CONFIG_MEMCG_KMEM (to use kmem extension)
> +e. Enable CONFIG_MEMCG_VMPRESSURE (to use vmpressure extension)
>  
>  3.1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?)
>  -------------------------------------------------------------------
> @@ -855,7 +856,7 @@ At reading, current status of OOM is shown.
>            The number of processes belonging to this cgroup killed by any
>            kind of OOM killer.
>  
> -11. Memory Pressure
> +11. Memory Pressure (CONFIG_MEMCG_VMPRESSURE)
>  ===================
>  


Please replace:

11. Memory Pressure (CONFIG_MEMCG_VMPRESSURE)
===================

with:

11. Memory Pressure (CONFIG_MEMCG_VMPRESSURE)
=============================================

Cheers,
Hu Haowen


>  The pressure level notifications can be used to monitor the memory
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 4042a82..d119fb8 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -6158,6 +6158,9 @@
>  	vmpoff=		[KNL,S390] Perform z/VM CP command after power off.
>  			Format: <command>
>  
> +	vmpressure=	[KNL] Enable or disable vmpressure notifier.
> +			Format: <bool>
> +
>  	vsyscall=	[X86-64]
>  			Controls the behavior of vsyscalls (i.e. calls to
>  			fixed addresses of 0xffffffffff600x00 from legacy
> diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
> index 0ff1464..b201d8e 100644
> --- a/include/linux/memcontrol.h
> +++ b/include/linux/memcontrol.h
> @@ -257,8 +257,10 @@ struct mem_cgroup {
>  
>  	unsigned long soft_limit;
>  
> +#ifdef CONFIG_MEMCG_VMPRESSURE
>  	/* vmpressure notifications */
>  	struct vmpressure vmpressure;
> +#endif
>  
>  	/*
>  	 * Should the OOM killer kill all belonging tasks, had it kill one?
> diff --git a/include/linux/vmpressure.h b/include/linux/vmpressure.h
> index 6a2f51e..dcae02e 100644
> --- a/include/linux/vmpressure.h
> +++ b/include/linux/vmpressure.h
> @@ -29,7 +29,8 @@ struct vmpressure {
>  
>  struct mem_cgroup;
>  
> -#ifdef CONFIG_MEMCG
> +#ifdef CONFIG_MEMCG_VMPRESSURE
> +extern bool vmpressure_enable;
>  extern void vmpressure(gfp_t gfp, struct mem_cgroup *memcg, bool tree,
>  		       unsigned long scanned, unsigned long reclaimed);
>  extern void vmpressure_prio(gfp_t gfp, struct mem_cgroup *memcg, int prio);
> @@ -48,5 +49,7 @@ static inline void vmpressure(gfp_t gfp, struct mem_cgroup *memcg, bool tree,
>  			      unsigned long scanned, unsigned long reclaimed) {}
>  static inline void vmpressure_prio(gfp_t gfp, struct mem_cgroup *memcg,
>  				   int prio) {}
> -#endif /* CONFIG_MEMCG */
> +static inline void vmpressure_init(struct vmpressure *vmpr) {}
> +static inline void vmpressure_cleanup(struct vmpressure *vmpr) {}
> +#endif /* CONFIG_MEMCG_PRESSURE */
>  #endif /* __LINUX_VMPRESSURE_H */
> diff --git a/init/Kconfig b/init/Kconfig
> index 71a028d..d3afeb2 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -948,6 +948,26 @@ config MEMCG_KMEM
>  	depends on MEMCG && !SLOB
>  	default y
>  
> +config MEMCG_VMPRESSURE
> +	bool "Memory pressure notifier"
> +	depends on MEMCG
> +	default y
> +	help
> +	  Vmpressure extension is used to monitor the memory allocation cost.
> +	  The pressure level can be set according to the use scenario and
> +	  application will be notified through eventfd when memory pressure is at
> +	  the specific level (or higher).
> +
> +config VMPRESSURE_DEFAULT_DISABLED
> +	bool "Require boot parameter to enable memory pressure notifier"
> +	depends on MEMCG_VMPRESSURE
> +	default n
> +	help
> +	  If set, memory pressure notifier will be disabled  but can be
> +	  enabled through passing vmpressure=1 on the kernel commandline
> +	  during boot.
> +	  For those who want to use memory pressure notifier flexibly.
> +
>  config BLK_CGROUP
>  	bool "IO controller"
>  	depends on BLOCK
> diff --git a/mm/Makefile b/mm/Makefile
> index 970604e..e4f99c1 100644
> --- a/mm/Makefile
> +++ b/mm/Makefile
> @@ -92,7 +92,8 @@ obj-$(CONFIG_MEMTEST)		+= memtest.o
>  obj-$(CONFIG_MIGRATION) += migrate.o
>  obj-$(CONFIG_TRANSPARENT_HUGEPAGE) += huge_memory.o khugepaged.o
>  obj-$(CONFIG_PAGE_COUNTER) += page_counter.o
> -obj-$(CONFIG_MEMCG) += memcontrol.o vmpressure.o
> +obj-$(CONFIG_MEMCG) += memcontrol.o
> +obj-$(CONFIG_MEMCG_VMPRESSURE) += vmpressure.o
>  obj-$(CONFIG_MEMCG_SWAP) += swap_cgroup.o
>  obj-$(CONFIG_CGROUP_HUGETLB) += hugetlb_cgroup.o
>  obj-$(CONFIG_GUP_TEST) += gup_test.o
> diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> index 3e7c205..ee060ae2 100644
> --- a/mm/memcontrol.c
> +++ b/mm/memcontrol.c
> @@ -248,6 +248,7 @@ static inline bool should_force_charge(void)
>  		(current->flags & PF_EXITING);
>  }
>  
> +#ifdef CONFIG_MEMCG_VMPRESSURE
>  /* Some nice accessors for the vmpressure. */
>  struct vmpressure *memcg_to_vmpressure(struct mem_cgroup *memcg)
>  {
> @@ -260,6 +261,7 @@ struct mem_cgroup *vmpressure_to_memcg(struct vmpressure *vmpr)
>  {
>  	return container_of(vmpr, struct mem_cgroup, vmpressure);
>  }
> +#endif
>  
>  #ifdef CONFIG_MEMCG_KMEM
>  extern spinlock_t css_set_lock;
> @@ -4794,9 +4796,12 @@ static ssize_t memcg_write_event_control(struct kernfs_open_file *of,
>  	} else if (!strcmp(name, "memory.oom_control")) {
>  		event->register_event = mem_cgroup_oom_register_event;
>  		event->unregister_event = mem_cgroup_oom_unregister_event;
> -	} else if (!strcmp(name, "memory.pressure_level")) {
> +#ifdef CONFIG_MEMCG_VMPRESSURE
> +	} else if (vmpressure_enable &&
> +		   !strcmp(name, "memory.pressure_level")) {
>  		event->register_event = vmpressure_register_event;
>  		event->unregister_event = vmpressure_unregister_event;
> +#endif
>  	} else if (!strcmp(name, "memory.memsw.usage_in_bytes")) {
>  		event->register_event = memsw_cgroup_usage_register_event;
>  		event->unregister_event = memsw_cgroup_usage_unregister_event;
> diff --git a/mm/vmpressure.c b/mm/vmpressure.c
> index 76518e4..b0d4358 100644
> --- a/mm/vmpressure.c
> +++ b/mm/vmpressure.c
> @@ -67,6 +67,19 @@ static const unsigned int vmpressure_level_critical = 95;
>   */
>  static const unsigned int vmpressure_level_critical_prio = ilog2(100 / 10);
>  
> +DEFINE_STATIC_KEY_FALSE(vmpressure_disabled);
> +#ifdef CONFIG_VMPRESSURE_DEFAULT_DISABLED
> +bool vmpressure_enable;
> +#else
> +bool vmpressure_enable = true;
> +#endif
> +static int __init setup_vmpressure(char *str)
> +{
> +	return kstrtobool(str, &vmpressure_enable) == 0;
> +}
> +__setup("vmpressure=", setup_vmpressure);
> +
> +
>  static struct vmpressure *work_to_vmpressure(struct work_struct *work)
>  {
>  	return container_of(work, struct vmpressure, work);
> @@ -246,6 +259,9 @@ void vmpressure(gfp_t gfp, struct mem_cgroup *memcg, bool tree,
>  
>  	vmpr = memcg_to_vmpressure(memcg);
>  
> +	if (static_branch_likely(&vmpressure_disabled))
> +		return;
> +
>  	/*
>  	 * Here we only want to account pressure that userland is able to
>  	 * help us with. For example, suppose that DMA zone is under
> @@ -326,6 +342,8 @@ void vmpressure(gfp_t gfp, struct mem_cgroup *memcg, bool tree,
>   */
>  void vmpressure_prio(gfp_t gfp, struct mem_cgroup *memcg, int prio)
>  {
> +	if (static_branch_likely(&vmpressure_disabled))
> +		return;
>  	/*
>  	 * We only use prio for accounting critical level. For more info
>  	 * see comment for vmpressure_level_critical_prio variable above.
> @@ -450,6 +468,11 @@ void vmpressure_unregister_event(struct mem_cgroup *memcg,
>   */
>  void vmpressure_init(struct vmpressure *vmpr)
>  {
> +	if (!vmpressure_enable) {
> +		static_branch_enable(&vmpressure_disabled);
> +		return;
> +	}
> +
>  	spin_lock_init(&vmpr->sr_lock);
>  	mutex_init(&vmpr->events_lock);
>  	INIT_LIST_HEAD(&vmpr->events);
> @@ -465,6 +488,9 @@ void vmpressure_init(struct vmpressure *vmpr)
>   */
>  void vmpressure_cleanup(struct vmpressure *vmpr)
>  {
> +
> +	if (static_branch_likely(&vmpressure_disabled))
> +		return;
>  	/*
>  	 * Make sure there is no pending work before eventfd infrastructure
>  	 * goes away.






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux