On 5/5/21 5:46 PM, Waiman Long wrote: > There are currently two problems in the way the objcg pointer array > (memcg_data) in the page structure is being allocated and freed. > > On its allocation, it is possible that the allocated objcg pointer > array comes from the same slab that requires memory accounting. If this > happens, the slab will never become empty again as there is at least > one object left (the obj_cgroup array) in the slab. > > When it is freed, the objcg pointer array object may be the last one > in its slab and hence causes kfree() to be called again. With the > right workload, the slab cache may be set up in a way that allows the > recursive kfree() calling loop to nest deep enough to cause a kernel > stack overflow and panic the system. > > One way to solve this problem is to split the kmalloc-<n> caches > (KMALLOC_NORMAL) into two separate sets - a new set of kmalloc-<n> > (KMALLOC_NORMAL) caches for non-accounted objects only and a new set of > kmalloc-cg-<n> (KMALLOC_CGROUP) caches for accounted objects only. All > the other caches can still allow a mix of accounted and non-accounted > objects. > > With this change, all the objcg pointer array objects will come from > KMALLOC_NORMAL caches which won't have their objcg pointer arrays. So > both the recursive kfree() problem and non-freeable slab problem are > gone. Since both the KMALLOC_NORMAL and KMALLOC_CGROUP caches no longer > have mixed accounted and unaccounted objects, this will slightly reduce > the number of objcg pointer arrays that need to be allocated and save > a bit of memory. > > The new KMALLOC_CGROUP is added between KMALLOC_NORMAL and > KMALLOC_RECLAIM so that the first for loop in create_kmalloc_caches() > will include the newly added caches without change. > > Suggested-by: Vlastimil Babka <vbabka@xxxxxxx> > Signed-off-by: Waiman Long <longman@xxxxxxxxxx> > --- > include/linux/slab.h | 42 ++++++++++++++++++++++++++++++++++-------- > mm/slab_common.c | 23 +++++++++++++++-------- > 2 files changed, 49 insertions(+), 16 deletions(-) > > diff --git a/include/linux/slab.h b/include/linux/slab.h > index 0c97d788762c..f2d9ebc34f5c 100644 > --- a/include/linux/slab.h > +++ b/include/linux/slab.h > @@ -305,9 +305,16 @@ static inline void __check_heap_object(const void *ptr, unsigned long n, > /* > * Whenever changing this, take care of that kmalloc_type() and > * create_kmalloc_caches() still work as intended. > + * > + * KMALLOC_NORMAL is for non-accounted objects only whereas KMALLOC_CGROUP > + * is for accounted objects only. All the other kmem caches can have both > + * accounted and non-accounted objects. > */ > enum kmalloc_cache_type { > KMALLOC_NORMAL = 0, > +#ifdef CONFIG_MEMCG_KMEM > + KMALLOC_CGROUP, > +#endif > KMALLOC_RECLAIM, > #ifdef CONFIG_ZONE_DMA > KMALLOC_DMA, > @@ -315,28 +322,47 @@ enum kmalloc_cache_type { > NR_KMALLOC_TYPES > }; > > +#ifndef CONFIG_MEMCG_KMEM > +#define KMALLOC_CGROUP KMALLOC_NORMAL > +#endif > +#ifndef CONFIG_ZONE_DMA > +#define KMALLOC_DMA KMALLOC_NORMAL > +#endif You could move this to the enum definition itself? E.g.: #ifdef CONFIG_MEMCG_KMEM KMALLOC_CGROUP, #else KMALLOC_CGROUP = KMALLOC_NORMAL, #endif > + > #ifndef CONFIG_SLOB > extern struct kmem_cache * > kmalloc_caches[NR_KMALLOC_TYPES][KMALLOC_SHIFT_HIGH + 1]; > > +/* > + * Define gfp bits that should not be set for KMALLOC_NORMAL. > + */ > +#define KMALLOC_NOT_NORMAL_BITS \ > + (__GFP_RECLAIMABLE | \ > + (IS_ENABLED(CONFIG_ZONE_DMA) ? __GFP_DMA : 0) | \ > + (IS_ENABLED(CONFIG_MEMCG_KMEM) ? __GFP_ACCOUNT : 0)) > + > static __always_inline enum kmalloc_cache_type kmalloc_type(gfp_t flags) > { > -#ifdef CONFIG_ZONE_DMA > /* > * The most common case is KMALLOC_NORMAL, so test for it > * with a single branch for both flags. Not "both flags" anymore. Something like "so test with a single branch that there are none of the flags that would select a different type" > */ > - if (likely((flags & (__GFP_DMA | __GFP_RECLAIMABLE)) == 0)) > + if (likely((flags & KMALLOC_NOT_NORMAL_BITS) == 0)) > return KMALLOC_NORMAL; > > /* > - * At least one of the flags has to be set. If both are, __GFP_DMA > - * is more important. > + * At least one of the flags has to be set. Their priorities in > + * decreasing order are: > + * 1) __GFP_DMA > + * 2) __GFP_RECLAIMABLE > + * 3) __GFP_ACCOUNT > */ > - return flags & __GFP_DMA ? KMALLOC_DMA : KMALLOC_RECLAIM; > -#else > - return flags & __GFP_RECLAIMABLE ? KMALLOC_RECLAIM : KMALLOC_NORMAL; > -#endif > + if (IS_ENABLED(CONFIG_ZONE_DMA) && (flags & __GFP_DMA)) > + return KMALLOC_DMA; > + if (!IS_ENABLED(CONFIG_MEMCG_KMEM) || (flags & __GFP_RECLAIMABLE)) > + return KMALLOC_RECLAIM; > + else > + return KMALLOC_CGROUP; > } Works for me this way, thanks. > > /* > diff --git a/mm/slab_common.c b/mm/slab_common.c > index f8833d3e5d47..d750e3ba7af5 100644 > --- a/mm/slab_common.c > +++ b/mm/slab_common.c > @@ -727,21 +727,25 @@ struct kmem_cache *kmalloc_slab(size_t size, gfp_t flags) > } > > #ifdef CONFIG_ZONE_DMA > -#define INIT_KMALLOC_INFO(__size, __short_size) \ > -{ \ > - .name[KMALLOC_NORMAL] = "kmalloc-" #__short_size, \ > - .name[KMALLOC_RECLAIM] = "kmalloc-rcl-" #__short_size, \ > - .name[KMALLOC_DMA] = "dma-kmalloc-" #__short_size, \ > - .size = __size, \ > -} > +#define KMALLOC_DMA_NAME(sz) .name[KMALLOC_DMA] = "dma-kmalloc-" #sz, > +#else > +#define KMALLOC_DMA_NAME(sz) > +#endif > + > +#ifdef CONFIG_MEMCG_KMEM > +#define KMALLOC_CGROUP_NAME(sz) .name[KMALLOC_CGROUP] = "kmalloc-cg-" #sz, > #else > +#define KMALLOC_CGROUP_NAME(sz) > +#endif > + > #define INIT_KMALLOC_INFO(__size, __short_size) \ > { \ > .name[KMALLOC_NORMAL] = "kmalloc-" #__short_size, \ > .name[KMALLOC_RECLAIM] = "kmalloc-rcl-" #__short_size, \ > + KMALLOC_CGROUP_NAME(__short_size) \ > + KMALLOC_DMA_NAME(__short_size) \ > .size = __size, \ > } > -#endif > > /* > * kmalloc_info[] is to make slub_debug=,kmalloc-xx option work at boot time. > @@ -847,6 +851,9 @@ void __init create_kmalloc_caches(slab_flags_t flags) > int i; > enum kmalloc_cache_type type; > > + /* > + * Including KMALLOC_CGROUP if CONFIG_MEMCG_KMEM defined > + */ > for (type = KMALLOC_NORMAL; type <= KMALLOC_RECLAIM; type++) { > for (i = KMALLOC_SHIFT_LOW; i <= KMALLOC_SHIFT_HIGH; i++) { > if (!kmalloc_caches[type][i]) >