Re: [PATCH v2 2/5] mm/swapfile: use percpu_ref to serialize against concurrent swapoff

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021/4/19 10:54, Huang, Ying wrote:
> Miaohe Lin <linmiaohe@xxxxxxxxxx> writes:
> 
>> Use percpu_ref to serialize against concurrent swapoff. Also remove the
>> SWP_VALID flag because it's used together with RCU solution.
>>
>> Signed-off-by: Miaohe Lin <linmiaohe@xxxxxxxxxx>
>> ---
>>  include/linux/swap.h |  3 +--
>>  mm/swapfile.c        | 43 +++++++++++++++++--------------------------
>>  2 files changed, 18 insertions(+), 28 deletions(-)
>>
>> diff --git a/include/linux/swap.h b/include/linux/swap.h
>> index 8be36eb58b7a..993693b38109 100644
>> --- a/include/linux/swap.h
>> +++ b/include/linux/swap.h
>> @@ -177,7 +177,6 @@ enum {
>>  	SWP_PAGE_DISCARD = (1 << 10),	/* freed swap page-cluster discards */
>>  	SWP_STABLE_WRITES = (1 << 11),	/* no overwrite PG_writeback pages */
>>  	SWP_SYNCHRONOUS_IO = (1 << 12),	/* synchronous IO is efficient */
>> -	SWP_VALID	= (1 << 13),	/* swap is valid to be operated on? */
>>  					/* add others here before... */
>>  	SWP_SCANNING	= (1 << 14),	/* refcount in scan_swap_map */
>>  };
>> @@ -514,7 +513,7 @@ sector_t swap_page_sector(struct page *page);
>>  
>>  static inline void put_swap_device(struct swap_info_struct *si)
>>  {
>> -	rcu_read_unlock();
>> +	percpu_ref_put(&si->users);
>>  }
>>  
>>  #else /* CONFIG_SWAP */
>> diff --git a/mm/swapfile.c b/mm/swapfile.c
>> index 66515a3a2824..90e197bc2eeb 100644
>> --- a/mm/swapfile.c
>> +++ b/mm/swapfile.c
>> @@ -1279,18 +1279,12 @@ static unsigned char __swap_entry_free_locked(struct swap_info_struct *p,
>>   * via preventing the swap device from being swapoff, until
>>   * put_swap_device() is called.  Otherwise return NULL.
>>   *
>> - * The entirety of the RCU read critical section must come before the
>> - * return from or after the call to synchronize_rcu() in
>> - * enable_swap_info() or swapoff().  So if "si->flags & SWP_VALID" is
>> - * true, the si->map, si->cluster_info, etc. must be valid in the
>> - * critical section.
>> - *
>>   * Notice that swapoff or swapoff+swapon can still happen before the
>> - * rcu_read_lock() in get_swap_device() or after the rcu_read_unlock()
>> - * in put_swap_device() if there isn't any other way to prevent
>> - * swapoff, such as page lock, page table lock, etc.  The caller must
>> - * be prepared for that.  For example, the following situation is
>> - * possible.
>> + * percpu_ref_tryget_live() in get_swap_device() or after the
>> + * percpu_ref_put() in put_swap_device() if there isn't any other way
>> + * to prevent swapoff, such as page lock, page table lock, etc.  The
>> + * caller must be prepared for that.  For example, the following
>> + * situation is possible.
>>   *
>>   *   CPU1				CPU2
>>   *   do_swap_page()
>> @@ -1318,21 +1312,24 @@ struct swap_info_struct *get_swap_device(swp_entry_t entry)
>>  	si = swp_swap_info(entry);
>>  	if (!si)
>>  		goto bad_nofile;
>> -
>> -	rcu_read_lock();
>> -	if (data_race(!(si->flags & SWP_VALID)))
>> -		goto unlock_out;
>> +	if (!percpu_ref_tryget_live(&si->users))
>> +		goto out;
>> +	/*
>> +	 * Guarantee we will not reference uninitialized fields
>> +	 * of swap_info_struct.
>> +	 */
> 
> /*
>  * Guarantee the si->users are checked before accessing other fields of
>  * swap_info_struct.
> */
> 
>> +	smp_rmb();
> 
> Usually, smp_rmb() need to be paired with smp_wmb().  Some comments are
> needed for that.  Here smb_rmb() is paired with the spin_unlock() after
> setup_swap_info() in enable_swap_info().
> 
>>  	offset = swp_offset(entry);
>>  	if (offset >= si->max)
>> -		goto unlock_out;
>> +		goto put_out;
>>  
>>  	return si;
>>  bad_nofile:
>>  	pr_err("%s: %s%08lx\n", __func__, Bad_file, entry.val);
>>  out:
>>  	return NULL;
>> -unlock_out:
>> -	rcu_read_unlock();
>> +put_out:
>> +	percpu_ref_put(&si->users);
>>  	return NULL;
>>  }
>>  
>> @@ -2475,7 +2472,7 @@ static void setup_swap_info(struct swap_info_struct *p, int prio,
>>  
>>  static void _enable_swap_info(struct swap_info_struct *p)
>>  {
>> -	p->flags |= SWP_WRITEOK | SWP_VALID;
>> +	p->flags |= SWP_WRITEOK;
>>  	atomic_long_add(p->pages, &nr_swap_pages);
>>  	total_swap_pages += p->pages;
>>  
>> @@ -2507,7 +2504,7 @@ static void enable_swap_info(struct swap_info_struct *p, int prio,
>>  	spin_unlock(&swap_lock);
>>  	/*
>>  	 * Guarantee swap_map, cluster_info, etc. fields are valid
>> -	 * between get/put_swap_device() if SWP_VALID bit is set
>> +	 * between get/put_swap_device().
>>  	 */
> 
> The comments need to be revised.  Something likes below?
> 
> /* Finished initialized swap device, now it's safe to reference it */
> 

All look good for me. Will do. Many thanks!

> Best Regards,
> Huang, Ying
> 
>>  	percpu_ref_resurrect(&p->users);
>>  	spin_lock(&swap_lock);
>> @@ -2625,12 +2622,6 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
>>  
>>  	reenable_swap_slots_cache_unlock();
>>  
>> -	spin_lock(&swap_lock);
>> -	spin_lock(&p->lock);
>> -	p->flags &= ~SWP_VALID;		/* mark swap device as invalid */
>> -	spin_unlock(&p->lock);
>> -	spin_unlock(&swap_lock);
>> -
>>  	percpu_ref_kill(&p->users);
>>  	/*
>>  	 * We need synchronize_rcu() here to protect the accessing
> 
> .
> 





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux