Hi folks,
What you've got here seems a more complicated problem than it
could originally look like. Please, see my comments below.
(Note I've discarded some of the email logs, which of no interest
to the discovered problem. Please also note that I haven't got any
Broadcom hardware to test out a solution suggested below.)
On Sun, Feb 28, 2021 at 10:19:51AM -0800, Florian Fainelli wrote:
> Hi Mike,
>
> On 2/28/2021 1:00 AM, Mike Rapoport wrote:
> > Hi Florian,
> >
> > On Sat, Feb 27, 2021 at 08:18:47PM -0800, Florian Fainelli wrote:
> >>
> >> [...]
> >>
> >> Hi Roman, Thomas and other linux-mips folks,
> >>
> >> Kamal and myself have been unable to boot v5.11 on MIPS since this
> >> commit, reverting it makes our MIPS platforms boot successfully. We do
> >> not see a warning like this one in the commit message, instead what
> >> happens appear to be a corrupted Device Tree which prevents the parsing
> >> of the "rdb" node and leading to the interrupt controllers not being
> >> registered, and the system eventually not booting.
> >>
> >> The Device Tree is built-into the kernel image and resides at
> >> arch/mips/boot/dts/brcm/bcm97435svmb.dts.
> >>
> >> Do you have any idea what could be wrong with MIPS specifically here?
Most likely the problem you've discovered has been there for quite
some time. The patch you are referring to just caused it to be
triggered by extending the early allocation range. See before that
patch was accepted the early memory allocations had been performed
in the range:
[kernel_end, RAM_END].
The patch changed that, so the early allocations are done within
[RAM_START + PAGE_SIZE, RAM_END].
In normal situations it's safe to do that as long as all the critical
memory regions (including the memory residing a space below the
kernel) have been reserved. But as soon as a memory with some critical
structures haven't been reserved, the kernel may allocate it to be used
for instance for early initializations with obviously unpredictable but
most of the times unpleasant consequences.
> >
> > Apparently there is a memblock allocation in one of the functions called
> > from arch_mem_init() between plat_mem_setup() and
> > early_init_fdt_reserve_self().
Mike, alas according to the log provided by Florian that's not the reason
of the problem. Please, see my considerations below.
> [...]
>
> [ 0.000000] Linux version 5.11.0-g5695e5161974 (florian@localhost)
> (mipsel-linux-gcc (GCC) 8.3.0, GNU ld (GNU Binutils) 2.32) #84 SMP Sun
> Feb 28 10:01:50 PST 2021
> [ 0.000000] CPU0 revision is: 00025b00 (Broadcom BMIPS5200)
> [ 0.000000] FPU revision is: 00130001
> [ 0.000000] memblock_add: [0x00000000-0x0fffffff]
> early_init_dt_scan_memory+0x160/0x1e0
> [ 0.000000] memblock_add: [0x20000000-0x4fffffff]
> early_init_dt_scan_memory+0x160/0x1e0
> [ 0.000000] memblock_add: [0x90000000-0xcfffffff]
> early_init_dt_scan_memory+0x160/0x1e0
Here the memory has been added to the memblock allocator.
> [ 0.000000] MIPS: machine is Broadcom BCM97435SVMB
> [ 0.000000] earlycon: ns16550a0 at MMIO32 0x10406b00 (options '')
> [ 0.000000] printk: bootconsole [ns16550a0] enabled
> [ 0.000000] memblock_reserve: [0x00aa7600-0x00aaa0a0]
> setup_arch+0x128/0x69c
Here the fdt memory has been reserved. (Note it's built into the
kernel.)
> [ 0.000000] memblock_reserve: [0x00010000-0x018313cf]
> setup_arch+0x1f8/0x69c
Here the kernel itself together with built-in dtb have been reserved.
So far so good.
> [ 0.000000] Initrd not found or empty - disabling initrd
> [ 0.000000] memblock_alloc_try_nid: 10913 bytes align=0x40 nid=-1
> from=0x00000000 max_addr=0x00000000
> early_init_dt_alloc_memory_arch+0x40/0x84
> [ 0.000000] memblock_reserve: [0x00001000-0x00003aa0]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 32680 bytes align=0x4 nid=-1
> from=0x00000000 max_addr=0x00000000
> early_init_dt_alloc_memory_arch+0x40/0x84
> [ 0.000000] memblock_reserve: [0x00003aa4-0x0000ba4b]
> memblock_alloc_range_nid+0xf8/0x198
The log above most likely belongs to the call-chain:
setup_arch()
+-> arch_mem_init()
+-> device_tree_init() - BMIPS specific method
+-> unflatten_and_copy_device_tree()
So to speak here we've copied the fdt from the original space
[0x00aa7600-0x00aaa0a0] into [0x00001000-0x00003aa0] and unflattened
it to [0x00003aa4-0x0000ba4b].
The problem is that a bit later the next call-chain is performed:
setup_arch()
+-> plat_smp_setup()
+-> mp_ops->smp_setup(); - registered by prom_init()->register_bmips_smp_ops();
+-> if (!board_ebase_setup)
board_ebase_setup = &bmips_ebase_setup;
So at the moment of the CPU traps initialization the bmips_ebase_setup()
method is called. What trap_init() does isn't compatible with the
allocation performed by the unflatten_and_copy_device_tree() method.
See the next comment.
> [ 0.000000] memblock_alloc_try_nid: 25 bytes align=0x4 nid=-1
> from=0x00000000 max_addr=0x00000000
> early_init_dt_alloc_memory_arch+0x40/0x84
> [ 0.000000] memblock_reserve: [0x0000ba4c-0x0000ba64]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_reserve: [0x0096a000-0x00969fff]
> setup_arch+0x3fc/0x69c
> [ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 setup_arch+0x4e0/0x69c
> [ 0.000000] memblock_reserve: [0x0000ba80-0x0000ba9f]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 setup_arch+0x4e0/0x69c
> [ 0.000000] memblock_reserve: [0x0000bb00-0x0000bb1f]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 setup_arch+0x4e0/0x69c
> [ 0.000000] memblock_reserve: [0x0000bb80-0x0000bb9f]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 64
> bytes.
> [ 0.000000] Primary data cache 32kB, 4-way, VIPT, no aliases,
> linesize 32 bytes
> [ 0.000000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes.
> [ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
> from=0x00000000 max_addr=0xffffffff fixrange_init+0x90/0xf4
> [ 0.000000] memblock_reserve: [0x0000c000-0x0000cfff]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
> from=0x00000000 max_addr=0xffffffff fixrange_init+0x90/0xf4
> [ 0.000000] memblock_reserve: [0x0000d000-0x0000dfff]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
> from=0x00000000 max_addr=0xffffffff fixrange_init+0x90/0xf4
> [ 0.000000] memblock_reserve: [0x0000e000-0x0000efff]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] Zone ranges:
> [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
> [ 0.000000] HighMem [mem 0x0000000010000000-0x00000000cfffffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
> [ 0.000000] node 0: [mem 0x0000000020000000-0x000000004fffffff]
> [ 0.000000] node 0: [mem 0x0000000090000000-0x00000000cfffffff]
> [ 0.000000] Initmem setup node 0 [mem
> 0x0000000000000000-0x00000000cfffffff]
> [ 0.000000] memblock_alloc_try_nid: 27262976 bytes align=0x80 nid=0
> from=0x00000000 max_addr=0x00000000
> alloc_node_mem_map.constprop.135+0x6c/0xc8
> [ 0.000000] memblock_reserve: [0x01831400-0x032313ff]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=0
> from=0x00000000 max_addr=0x00000000 setup_usemap+0x64/0x98
> [ 0.000000] memblock_reserve: [0x0000bc00-0x0000bc1f]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 384 bytes align=0x80 nid=0
> from=0x00000000 max_addr=0x00000000 setup_usemap+0x64/0x98
> [ 0.000000] memblock_reserve: [0x0000bc80-0x0000bdff]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] MEMBLOCK configuration:
> [ 0.000000] memory size = 0x80000000 reserved size = 0x0322f032
> [ 0.000000] memory.cnt = 0x3
> [ 0.000000] memory[0x0] [0x00000000-0x0fffffff], 0x10000000
> bytes flags: 0x0
> [ 0.000000] memory[0x1] [0x20000000-0x4fffffff], 0x30000000
> bytes flags: 0x0
> [ 0.000000] memory[0x2] [0x90000000-0xcfffffff], 0x40000000
> bytes flags: 0x0
> [ 0.000000] reserved.cnt = 0xa
> [ 0.000000] reserved[0x0] [0x00001000-0x00003aa0], 0x00002aa1
> bytes flags: 0x0
> [ 0.000000] reserved[0x1] [0x00003aa4-0x0000ba64], 0x00007fc1
> bytes flags: 0x0
> [ 0.000000] reserved[0x2] [0x0000ba80-0x0000ba9f], 0x00000020
> bytes flags: 0x0
> [ 0.000000] reserved[0x3] [0x0000bb00-0x0000bb1f], 0x00000020
> bytes flags: 0x0
> [ 0.000000] reserved[0x4] [0x0000bb80-0x0000bb9f], 0x00000020
> bytes flags: 0x0
> [ 0.000000] reserved[0x5] [0x0000bc00-0x0000bc1f], 0x00000020
> bytes flags: 0x0
> [ 0.000000] reserved[0x6] [0x0000bc80-0x0000bdff], 0x00000180
> bytes flags: 0x0
> [ 0.000000] reserved[0x7] [0x0000c000-0x0000efff], 0x00003000
> bytes flags: 0x0
> [ 0.000000] reserved[0x8] [0x00010000-0x018313cf], 0x018213d0
> bytes flags: 0x0
> [ 0.000000] reserved[0x9] [0x01831400-0x032313ff], 0x01a00000
> bytes flags: 0x0
> [ 0.000000] memblock_alloc_try_nid: 30 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 start_kernel+0x12c/0x654
> [ 0.000000] memblock_reserve: [0x0000be00-0x0000be1d]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 30 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 start_kernel+0x150/0x654
> [ 0.000000] memblock_reserve: [0x0000be80-0x0000be9d]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
> from=0x00000000 max_addr=0x00000000 pcpu_embed_first_chunk+0x3b0/0x884
> [ 0.000000] memblock_reserve: [0x0000f000-0x0000ffff]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 pcpu_embed_first_chunk+0x5a4/0x884
> [ 0.000000] memblock_reserve: [0x03231400-0x032323ff]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 294912 bytes align=0x1000 nid=-1
> from=0x01000000 max_addr=0x00000000 pcpu_dfl_fc_alloc+0x24/0x30
> [ 0.000000] memblock_reserve: [0x03233000-0x0327afff]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_free: [0x03245000-0x03244fff]
> pcpu_embed_first_chunk+0x7a0/0x884
> [ 0.000000] memblock_free: [0x03257000-0x03256fff]
> pcpu_embed_first_chunk+0x7a0/0x884
> [ 0.000000] memblock_free: [0x03269000-0x03268fff]
> pcpu_embed_first_chunk+0x7a0/0x884
> [ 0.000000] memblock_free: [0x0327b000-0x0327afff]
> pcpu_embed_first_chunk+0x7a0/0x884
> [ 0.000000] percpu: Embedded 18 pages/cpu s50704 r0 d23024 u73728
> [ 0.000000] memblock_alloc_try_nid: 4 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x178/0x6ec
> [ 0.000000] memblock_reserve: [0x0000bf00-0x0000bf03]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 4 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x1a8/0x6ec
> [ 0.000000] memblock_reserve: [0x0000bf80-0x0000bf83]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 16 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x1dc/0x6ec
> [ 0.000000] memblock_reserve: [0x03232400-0x0323240f]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 16 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x20c/0x6ec
> [ 0.000000] memblock_reserve: [0x03232480-0x0323248f]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 128 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x558/0x6ec
> [ 0.000000] memblock_reserve: [0x03232500-0x0323257f]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 92 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x8c/0x294
> [ 0.000000] memblock_reserve: [0x03232580-0x032325db]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 768 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0xe0/0x294
> [ 0.000000] memblock_reserve: [0x03232600-0x032328ff]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 772 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x124/0x294
> [ 0.000000] memblock_reserve: [0x03232900-0x03232c03]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_alloc_try_nid: 192 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x158/0x294
> [ 0.000000] memblock_reserve: [0x03232c80-0x03232d3f]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] memblock_free: [0x0000f000-0x0000ffff]
> pcpu_embed_first_chunk+0x838/0x884
> [ 0.000000] memblock_free: [0x03231400-0x032323ff]
> pcpu_embed_first_chunk+0x850/0x884
> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 523776
> [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon
> [ 0.000000] memblock_alloc_try_nid: 131072 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 alloc_large_system_hash+0x1f8/0x33c
> [ 0.000000] memblock_reserve: [0x0327b000-0x0329afff]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072
> bytes, linear)
> [ 0.000000] memblock_alloc_try_nid: 65536 bytes align=0x80 nid=-1
> from=0x00000000 max_addr=0x00000000 alloc_large_system_hash+0x1f8/0x33c
> [ 0.000000] memblock_reserve: [0x0329b000-0x032aafff]
> memblock_alloc_range_nid+0xf8/0x198
> [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536
> bytes, linear)
> [ 0.000000] memblock_reserve: [0x00000000-0x000003ff]
> trap_init+0x70/0x4e8
Most likely someplace here the corruption has happened. The log above
has just reserved a memory for NMI/reset vectors:
arch/mips/kernel/traps.c: trap_init(void): Line 2373.
But then the board_ebase_setup() pointer is dereferenced and called,
which has been initialized with bmips_ebase_setup() earlier and which
overwrites the ebase variable with: 0x80001000 as this is
CPU_BMIPS5000 CPU. So any further calls of the functions like
set_handler()/set_except_vector()/set_vi_srs_handler()/etc may cause a
corruption of the memory above 0x80001000, which as we have discovered
belongs to fdt and unflattened device tree.
> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> [ 0.000000] Memory: 2045268K/2097152K available (8226K kernel code,
> 1070K rwdata, 1336K rodata, 13808K init, 260K bss, 51884K reserved, 0K
> cma-reserved, 1835008K highmem)
> [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [ 0.000000] rcu: Hierarchical RCU implementation.
> [ 0.000000] rcu: RCU event tracing is enabled.
> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
> is 25 jiffies.
> [ 0.000000] NR_IRQS: 256
> [ 0.000000] OF: Bad cell count for /rdb
> [ 0.000000] irq_bcm7038_l1: failed to remap intc L1 registers
> [ 0.000000] OF: of_irq_init: children remain, but no parents
So here is the first time we have got the consequence of the corruption
popped up. Luckily it's just the "Bad cells count" error. We could have
got much less obvious log here up to getting a crash at some place
further...
> [ 0.000000] random: get_random_bytes called from
> start_kernel+0x444/0x654 with crng_init=0
> [ 0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns,
> wraps every 8589934590000000ns
>
> and with your patch applied which unfortunately did not work we have the
> following:
>
> [...]
So a patch like this shall workaround the corruption:
--- a/arch/mips/bmips/setup.c
+++ b/arch/mips/bmips/setup.c
@@ -174,6 +174,8 @@ void __init plat_mem_setup(void)
__dt_setup_arch(dtb);
+ memblock_reserve(0x0, 0x1000 + 0x100*64);
+
for (q = bmips_quirk_list; q->quirk_fn; q++) {
if (of_flat_dt_is_compatible(of_get_flat_dt_root(),
q->compatible)) {
But the main question is how to fix the problem in general. At least
for Broadcom CPUs the reservation needs to be performed before
device_tree_init() is called, since the later is the very first
method which starts allocating from memblock. So the best candidate is
to use plat_mem_setup() for reservation right after the memory is
added to the memblock allocator by means of the __dt_setup_arch()
function invocation. In addition, we need take into account the amount
of memory each type of the Broadcom CPU needs for the exception
vectors. So a function like this could be used to reserve the
exception vectors memory:
static void bmips_ebase_reserve(void)
{
phys_addr_t base, size = VECTORSPACING*64;
switch (current_cpu_type()) {
case CPU_BMIPS4350:
return;
case CPU_BMIPS3300:
case CPU_BMIPS4380:
base = 0x0400;
break;
case CPU_BMIPS5000:
base = 0x1000;
break;
default:
return;
}
memblock_reserve(base, size);
}
Though I am not sure it's correct. At least on P5600 the vector spacing
is configurable.
Anyway all of that concerns the Broadcom CPUs. But the same problem we
can experience for some other platforms which developers weren't
careful enough in reserving all the critical memory sections in the
platform code. Especially after the introduced by Roman patch has been
merged into the kernel.
-Sergey
>
> [...]
> --
> Florian
