On Thu, Jan 28, 2021 at 4:24 AM Michael Kerrisk (man-pages) <mtk.manpages@xxxxxxxxx> wrote: > > Hello Suren, > > Thank you for writing this page! Some comments below. Thanks for the review! Couple questions below and I'll respin the new version once they are clarified. > > On Wed, 20 Jan 2021 at 21:36, Suren Baghdasaryan <surenb@xxxxxxxxxx> wrote: > > > > Initial version of process_madvise(2) manual page. Initial text was > > extracted from [1], amended after fix [2] and more details added using > > man pages of madvise(2) and process_vm_read(2) as examples. It also > > includes the changes to required permission proposed in [3]. > > > > [1] https://lore.kernel.org/patchwork/patch/1297933/ > > [2] https://lkml.org/lkml/2020/12/8/1282 > > [3] https://patchwork.kernel.org/project/selinux/patch/20210111170622.2613577-1-surenb@xxxxxxxxxx/#23888311 > > > > Signed-off-by: Suren Baghdasaryan <surenb@xxxxxxxxxx> > > Signed-off-by: Minchan Kim <minchan@xxxxxxxxxx> > > --- > > > > Adding the plane text version for ease of review: > > Thanks for adding the rendered version. I will make my comments > against the source, below. > > > NAME > > process_madvise - give advice about use of memory to a process > > > > SYNOPSIS > > #include <sys/uio.h> > > > > ssize_t process_madvise(int pidfd, > > const struct iovec *iovec, > > unsigned long vlen, > > int advice, > > unsigned int flags); > > > > DESCRIPTION > > The process_madvise() system call is used to give advice or directions to > > the kernel about the address ranges from external process as well as local > > process. It provides the advice to address ranges of process described by > > iovec and vlen. The goal of such advice is to improve system or application > > performance. > > > > The pidfd selects the process referred to by the PID file descriptor > > specified in pidfd. (see pidofd_open(2) for further information). > > > > The pointer iovec points to an array of iovec structures, defined in > > <sys/uio.h> as: > > > > struct iovec { > > void *iov_base; /* Starting address */ > > size_t iov_len; /* Number of bytes to transfer */ > > }; > > > > The iovec describes address ranges beginning at iov_base address and with > > the size of iov_len bytes. > > > > The vlen represents the number of elements in iovec. > > > > The advice can be one of the values listed below. > > > > Linux-specific advice values > > The following Linux-specific advice values have no counterparts in the > > POSIX-specified posix_madvise(3), and may or may not have counterparts in > > the madvise() interface available on other implementations. > > > > MADV_COLD (since Linux 5.4.1) > > Deactivate a given range of pages by moving them from active to > > inactive LRU list. This is done to accelerate the reclaim of these > > pages. The advice might be ignored for some pages in the range when it > > is not applicable. > > MADV_PAGEOUT (since Linux 5.4.1) > > Reclaim a given range of pages. This is done to free up memory occupied > > by these pages. If a page is anonymous it will be swapped out. If a > > page is file-backed and dirty it will be written back into the backing > > storage. The advice might be ignored for some pages in the range when > > it is not applicable. > > > > The flags argument is reserved for future use; currently, this argument must > > be specified as 0. > > > > The value specified in the vlen argument must be less than or equal to > > IOV_MAX (defined in <limits.h> or accessible via the call > > sysconf(_SC_IOV_MAX)). > > > > The vlen and iovec arguments are checked before applying any hints. If the > > vlen is too big, or iovec is invalid, an error will be returned > > immediately. > > > > Hint might be applied to a part of iovec if one of its elements points to > > an invalid memory region in the remote process. No further elements will be > > processed beyond that point. > > > > Permission to provide a hint to external process is governed by a ptrace > > access mode PTRACE_MODE_READ_REALCREDS check; see ptrace(2) and > > CAP_SYS_ADMIN capability that caller should have in order to affect > > performance of an external process. > > > > RETURN VALUE > > On success, process_madvise() returns the number of bytes advised. This > > return value may be less than the total number of requested bytes, if an > > error occurred. The caller should check return value to determine whether > > a partial advice occurred. > > So there are three return values possible, Ok, I think I see your point. How about this instead: RETURN VALUE On success, process_madvise() returns the number of bytes advised. This return value may be less than the total number of requested bytes, if an error occurred after some iovec elements were already processed. The caller should check the return value to determine whether a partial advice occurred. On error, -1 is returned and errno is set appropriately. > > ERRORS > > EFAULT The memory described by iovec is outside the accessible address > > space of the process pid. > > s/pid/ > of the process referred to by > .IR pidfd . ack > > > EINVAL flags is not 0. > > EINVAL The sum of the iov_len values of iovec overflows a ssize_t value. > > EINVAL vlen is too large. > > ENOMEM Could not allocate memory for internal copies of the iovec > > structures. > > EPERM The caller does not have permission to access the address space of > > the process pidfd. > > ESRCH No process with ID pidfd exists. > > > > VERSIONS > > Since Linux 5.10, support for this system call is optional, depending on > > the setting of the CONFIG_ADVISE_SYSCALLS configuration option. > > > > SEE ALSO > > madvise(2), pidofd_open(2), process_vm_readv(2), process_vm_write(2) > > > > man2/process_madvise.2 | 208 +++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 208 insertions(+) > > create mode 100644 man2/process_madvise.2 > > > > diff --git a/man2/process_madvise.2 b/man2/process_madvise.2 > > new file mode 100644 > > index 000000000..9bb5cb5ed > > --- /dev/null > > +++ b/man2/process_madvise.2 > > @@ -0,0 +1,208 @@ > > +.\" Copyright (C) 2021 Suren Baghdasaryan <surenb@xxxxxxxxxx> > > +.\" and Copyright (C) 2021 Minchan Kim <minchan@xxxxxxxxxx> > > +.\" > > +.\" %%%LICENSE_START(VERBATIM) > > +.\" Permission is granted to make and distribute verbatim copies of this > > +.\" manual provided the copyright notice and this permission notice are > > +.\" preserved on all copies. > > +.\" > > +.\" Permission is granted to copy and distribute modified versions of this > > +.\" manual under the conditions for verbatim copying, provided that the > > +.\" entire resulting derived work is distributed under the terms of a > > +.\" permission notice identical to this one. > > +.\" > > +.\" Since the Linux kernel and libraries are constantly changing, this > > +.\" manual page may be incorrect or out-of-date. The author(s) assume no > > +.\" responsibility for errors or omissions, or for damages resulting from > > +.\" the use of the information contained herein. The author(s) may not > > +.\" have taken the same level of care in the production of this manual, > > +.\" which is licensed free of charge, as they might when working > > +.\" professionally. > > +.\" > > +.\" Formatted or processed versions of this manual, if unaccompanied by > > +.\" the source, must acknowledge the copyright and authors of this work. > > +.\" %%%LICENSE_END > > +.\" > > +.\" Commit ecb8ac8b1f146915aa6b96449b66dd48984caacc > > +.\" > > +.TH PROCESS_MADVISE 2 2021-01-12 "Linux" "Linux Programmer's Manual" > > +.SH NAME > > +process_madvise \- give advice about use of memory to a process > > +.SH SYNOPSIS > > +.nf > > +.B #include <sys/uio.h> > > +.PP > > +.BI "ssize_t process_madvise(int " pidfd , > > +.BI " const struct iovec *" iovec , > > +.BI " unsigned long " vlen , > > +.BI " int " advice , > > +.BI " unsigned int " flags ");" > > +.fi > > +.SH DESCRIPTION > > +The > > +.BR process_madvise() > > +system call is used to give advice or directions > > +to the kernel about the address ranges from external process as well as > > s/from external/of other/ ack > > +local process. It provides the advice to address ranges of process > > s/local/of the calling/ ack > > Please start new sentence on new lines. (See the discussion of > semantic newlines in man-pages(7).) ack > > > +described by > > +.I iovec > > +and > > +.I vlen\. > > +The goal of such advice is to improve system or application performance. > > +.PP > > +The > > +.I pidfd > > +selects the process referred to by the PID file descriptor > > +specified in pidfd. (see > > +.BR pidofd_open(2) > > +for further information). > > Rewrite the previous as: > > [[ > The > .I pidfd > argument is a PID file descriptor (see > .BR pidofd_open (2)) > that specifies the process to which the advice is to be applied. ack > > > +.PP > > +The pointer > > +.I iovec > > +points to an array of iovec structures, defined in > > "iovec" should be formatted as > > .I iovec I think it is formatted that way above. What am I missing? BTW, where should I be using .I vs .IR? I was looking for an answer but could not find it. > > > +.IR <sys/uio.h> > > +as: > > +.PP > > +.in +4n > > +.EX > > +struct iovec { > > + void *iov_base; /* Starting address */ > > + size_t iov_len; /* Number of bytes to transfer */ > > +}; > > +.EE > > +.in > > +.PP > > +The > > +.I iovec > > +describes address ranges beginning at > > s/describes/structure describes/ ack > > > +.I iov_base > > +address and with the size of > > +.I iov_len > > +bytes. > > +.PP > > +The > > +.I vlen > > +represents the number of elements in > > +.I iovec\. > > ==> > the > .IR iovec > structure. ack > > +.PP > > +The > > +.I advice > > +can be one of the values listed below. > > s/can be/argument is/ ack > > > +.\" > > +.\" ====================================================================== > > +.\" > > +.SS Linux-specific advice values > > +The following Linux-specific > > +.I advice > > +values have no counterparts in the POSIX-specified > > +.BR posix_madvise (3), > > +and may or may not have counterparts in the > > +.BR madvise () > > +interface available on other implementations. > > +.TP > > +.BR MADV_COLD " (since Linux 5.4.1)" > > +.\" commit 9c276cc65a58faf98be8e56962745ec99ab87636 > > +Deactivate a given range of pages by moving them from active to inactive > > +LRU list. This is done to accelerate the reclaim of these pages. The advice > > New sentences on new lines. ack > > > +might be ignored for some pages in the range when it is not applicable. > > +.TP > > +.BR MADV_PAGEOUT " (since Linux 5.4.1)" > > +.\" commit 1a4e58cce84ee88129d5d49c064bd2852b481357 > > +Reclaim a given range of pages. This is done to free up memory occupied by > > +these pages. If a page is anonymous it will be swapped out. If a page is > > +file-backed and dirty it will be written back into the backing storage. > > s/into/to/ ack > > > +The advice might be ignored for some pages in the range when it is not > > +applicable. > > +.PP > > +The > > +.I flags > > +argument is reserved for future use; currently, this argument must be > > +specified as 0. > > +.PP > > +The value specified in the > > +.I vlen > > +argument must be less than or equal to > > +.BR IOV_MAX > > +(defined in > > +.I <limits.h> > > +or accessible via the call > > +.IR sysconf(_SC_IOV_MAX) ). > > +.PP > > +The > > +.I vlen > > +and > > +.I iovec > > +arguments are checked before applying any hints. > > +If the > > +.I vlen > > +is too big, or > > +.I iovec > > +is invalid, an error will be returned immediately. > > +.PP > > +Hint might be applied to a part of > > s/Hint/The hint/ ack > > > +.I iovec > > +if one of its elements points to an invalid memory > > +region in the remote process. No further elements will be > > +processed beyond that point. > > +.PP > > +Permission to provide a hint to external process is governed by a > > +ptrace access mode > > +.B PTRACE_MODE_READ_REALCREDS > > +check; see > > +.BR ptrace (2) > > +and > > +.B CAP_SYS_ADMIN > > +capability that caller should have in order to affect performance > > +of an external process. > > The preceding sentence is garbled. Missing words? Maybe I worded it incorrectly. What I need to say here is that the caller should have both PTRACE_MODE_READ_REALCREDS credentials and CAP_SYS_ADMIN capability. The first part I shamelessly copy/pasted from https://man7.org/linux/man-pages/man2/process_vm_readv.2.html and tried adding the second one to it, obviously unsuccessfully. Any advice on how to fix that? > > > +.SH RETURN VALUE > > +On success, process_madvise() returns the number of bytes advised. > > +This return value may be less than the total number of requested > > +bytes, if an error occurred. The caller should check return value > > +to determine whether a partial advice occurred. > > +.SH ERRORS > > +.TP > > +.B EFAULT > > +The memory described by > > +.I iovec > > +is outside the accessible address space of the process pid. > > s/process pid./ > the process referred to by > .IR pidfd . > / ack > > > +.TP > > +.B EINVAL > > +.I flags > > +is not 0. > > +.TP > > +.B EINVAL > > +The sum of the > > +.I iov_len > > +values of > > +.I iovec > > +overflows a ssize_t value. > > .I ssize_t ack > > > +.TP > > +.B EINVAL > > +.I vlen > > +is too large. > > +.TP > > +.B ENOMEM > > +Could not allocate memory for internal copies of the > > +.I iovec > > +structures. > > +.TP > > +.B EPERM > > +The caller does not have permission to access the address space of the process > > +.I pidfd. > > .IR pidfd . ack > > > +.TP > > +.B ESRCH > > +No process with ID > > +.I pidfd > > +exists. > > Should this maybe be: > [[ > The target process does not exist (i.e., it has terminated and > been waited on). > ]] > > See pidfd_send_signal(2). I "borrowed" mine from https://man7.org/linux/man-pages/man2/process_vm_readv.2.html but either one sounds good to me. Maybe for pidfd_send_signal the wording about termination is more important. Anyway, it's up to you. Just let me know which one to use. > > Also, is an EBADF error possible? Again, see pidfd_send_signal(2). Ah, right. I missed that pidfd_get_pid() can return that value. Will add. > > > +.SH VERSIONS > > +Since Linux 5.10, > > Better: This system call first appeared in Linux 5.10. ack > > > +.\" commit ecb8ac8b1f146915aa6b96449b66dd48984caacc > > +support for this system call is optional, > > s/support/Support/ ack > > > +depending on the setting of the > > +.B CONFIG_ADVISE_SYSCALLS > > +configuration option. > > +.SH SEE ALSO > > +.BR madvise (2), > > +.BR pidofd_open(2), > > +.BR process_vm_readv (2), > > +.BR process_vm_write (2) > > Thanks, > > Michael > Thanks, Suren > > -- > Michael Kerrisk > Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ > Linux/UNIX System Programming Training: http://man7.org/training/
