[PATCH v17 06/26] x86/cet: Add control-protection fault handler

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A control-protection fault is triggered when a control-flow transfer
attempt violates Shadow Stack or Indirect Branch Tracking constraints.
For example, the return address for a RET instruction differs from the copy
on the shadow stack; or an indirect JMP instruction, without the NOTRACK
prefix, arrives at a non-ENDBR opcode.

The control-protection fault handler works in a similar way as the general
protection fault handler.  It provides the si_code SEGV_CPERR to the signal
handler.

Signed-off-by: Yu-cheng Yu <yu-cheng.yu@xxxxxxxxx>
---
 arch/x86/include/asm/idtentry.h    |  4 ++
 arch/x86/kernel/idt.c              |  4 ++
 arch/x86/kernel/signal_compat.c    |  2 +-
 arch/x86/kernel/traps.c            | 59 ++++++++++++++++++++++++++++++
 include/uapi/asm-generic/siginfo.h |  3 +-
 5 files changed, 70 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/idtentry.h b/arch/x86/include/asm/idtentry.h
index 247a60a47331..244dee0e092a 100644
--- a/arch/x86/include/asm/idtentry.h
+++ b/arch/x86/include/asm/idtentry.h
@@ -574,6 +574,10 @@ DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_SS,	exc_stack_segment);
 DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_GP,	exc_general_protection);
 DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_AC,	exc_alignment_check);
 
+#ifdef CONFIG_X86_CET_USER
+DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_CP, exc_control_protection);
+#endif
+
 /* Raw exception entries which need extra work */
 DECLARE_IDTENTRY_RAW(X86_TRAP_UD,		exc_invalid_op);
 DECLARE_IDTENTRY_RAW(X86_TRAP_BP,		exc_int3);
diff --git a/arch/x86/kernel/idt.c b/arch/x86/kernel/idt.c
index ee1a283f8e96..463dcae55c3f 100644
--- a/arch/x86/kernel/idt.c
+++ b/arch/x86/kernel/idt.c
@@ -105,6 +105,10 @@ static const __initconst struct idt_data def_idts[] = {
 #elif defined(CONFIG_X86_32)
 	SYSG(IA32_SYSCALL_VECTOR,	entry_INT80_32),
 #endif
+
+#ifdef CONFIG_X86_CET_USER
+	INTG(X86_TRAP_CP,		asm_exc_control_protection),
+#endif
 };
 
 /*
diff --git a/arch/x86/kernel/signal_compat.c b/arch/x86/kernel/signal_compat.c
index a5330ff498f0..dd92490b1e7f 100644
--- a/arch/x86/kernel/signal_compat.c
+++ b/arch/x86/kernel/signal_compat.c
@@ -27,7 +27,7 @@ static inline void signal_compat_build_tests(void)
 	 */
 	BUILD_BUG_ON(NSIGILL  != 11);
 	BUILD_BUG_ON(NSIGFPE  != 15);
-	BUILD_BUG_ON(NSIGSEGV != 9);
+	BUILD_BUG_ON(NSIGSEGV != 10);
 	BUILD_BUG_ON(NSIGBUS  != 5);
 	BUILD_BUG_ON(NSIGTRAP != 5);
 	BUILD_BUG_ON(NSIGCHLD != 6);
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 7f5aec758f0e..b0a3e05f9950 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -606,6 +606,65 @@ DEFINE_IDTENTRY_ERRORCODE(exc_general_protection)
 	cond_local_irq_disable(regs);
 }
 
+#ifdef CONFIG_X86_CET_USER
+static const char * const control_protection_err[] = {
+	"unknown",
+	"near-ret",
+	"far-ret/iret",
+	"endbranch",
+	"rstorssp",
+	"setssbsy",
+};
+
+/*
+ * When a control protection exception occurs, send a signal to the responsible
+ * application.  Currently, control protection is only enabled for the user
+ * mode.  This exception should not come from the kernel mode.
+ */
+DEFINE_IDTENTRY_ERRORCODE(exc_control_protection)
+{
+	struct task_struct *tsk;
+
+	if (!user_mode(regs)) {
+		if (notify_die(DIE_TRAP, "control protection fault", regs,
+			       error_code, X86_TRAP_CP, SIGSEGV) == NOTIFY_STOP)
+			return;
+		die("Upexpected/unsupported kernel control protection fault", regs, error_code);
+	}
+
+	cond_local_irq_enable(regs);
+
+	if (!boot_cpu_has(X86_FEATURE_CET))
+		WARN_ONCE(1, "Control protection fault with CET support disabled\n");
+
+	tsk = current;
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_nr = X86_TRAP_CP;
+
+	if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
+	    printk_ratelimit()) {
+		unsigned int max_err;
+		unsigned long ssp;
+
+		max_err = ARRAY_SIZE(control_protection_err) - 1;
+		if ((error_code < 0) || (error_code > max_err))
+			error_code = 0;
+
+		rdmsrl(MSR_IA32_PL3_SSP, ssp);
+		pr_info("%s[%d] control protection ip:%lx sp:%lx ssp:%lx error:%lx(%s)",
+			tsk->comm, task_pid_nr(tsk),
+			regs->ip, regs->sp, ssp, error_code,
+			control_protection_err[error_code]);
+		print_vma_addr(KERN_CONT " in ", regs->ip);
+		pr_cont("\n");
+	}
+
+	force_sig_fault(SIGSEGV, SEGV_CPERR,
+			(void __user *)uprobe_get_trap_addr(regs));
+	cond_local_irq_disable(regs);
+}
+#endif
+
 static bool do_int3(struct pt_regs *regs)
 {
 	int res;
diff --git a/include/uapi/asm-generic/siginfo.h b/include/uapi/asm-generic/siginfo.h
index d2597000407a..1c2ea91284a0 100644
--- a/include/uapi/asm-generic/siginfo.h
+++ b/include/uapi/asm-generic/siginfo.h
@@ -231,7 +231,8 @@ typedef struct siginfo {
 #define SEGV_ADIPERR	7	/* Precise MCD exception */
 #define SEGV_MTEAERR	8	/* Asynchronous ARM MTE error */
 #define SEGV_MTESERR	9	/* Synchronous ARM MTE exception */
-#define NSIGSEGV	9
+#define SEGV_CPERR	10	/* Control protection fault */
+#define NSIGSEGV	10
 
 /*
  * SIGBUS si_codes
-- 
2.21.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux