[PATCH 0/4] arm64: Default to 32-bit wide ZONE_DMA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Using two distinct DMA zones turned out to be problematic. Here's an
attempt go back to a saner default.

I tested this on both a RPi4 and QEMU.

---

Nicolas Saenz Julienne (4):
  of/fdt: Update zone_dma_bits when running in bcm2711
  dma-direct: Turn zone_dma_bits default value into a define
  arm64: Default to 32-bit ZONE_DMA
  mm: Update DMA zones description with arm64 newer behavior

 arch/arm64/mm/init.c       | 12 ++++++++----
 drivers/of/fdt.c           | 10 ++++++++++
 include/linux/dma-direct.h |  1 +
 include/linux/mmzone.h     |  5 +++--
 kernel/dma/direct.c        |  2 +-
 5 files changed, 23 insertions(+), 7 deletions(-)

-- 
2.28.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux