Re: [PATCH v4 13/13] mm/debug_vm_pgtable: Avoid none pte in pte_clear_test

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 09/11/2020 10:51 AM, Aneesh Kumar K.V wrote:
> Nathan Chancellor <natechancellor@xxxxxxxxx> writes:
> 
>> On Wed, Sep 02, 2020 at 05:12:22PM +0530, Aneesh Kumar K.V wrote:
>>> pte_clear_tests operate on an existing pte entry. Make sure that
>>> is not a none pte entry.
>>>
>>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@xxxxxxxxxxxxx>
>>> ---
>>>  mm/debug_vm_pgtable.c | 7 ++++---
>>>  1 file changed, 4 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/mm/debug_vm_pgtable.c b/mm/debug_vm_pgtable.c
>>> index 9afa1354326b..c36530c69e33 100644
>>> --- a/mm/debug_vm_pgtable.c
>>> +++ b/mm/debug_vm_pgtable.c
>>> @@ -542,9 +542,10 @@ static void __init pgd_populate_tests(struct mm_struct *mm, pgd_t *pgdp,
>>>  #endif /* PAGETABLE_P4D_FOLDED */
>>>  
>>>  static void __init pte_clear_tests(struct mm_struct *mm, pte_t *ptep,
>>> -				   unsigned long vaddr)
>>> +				   unsigned long pfn, unsigned long vaddr,
>>> +				   pgprot_t prot)
>>>  {
>>> -	pte_t pte = ptep_get(ptep);
>>> +	pte_t pte = pfn_pte(pfn, prot);
>>>  
>>>  	pr_debug("Validating PTE clear\n");
>>>  	pte = __pte(pte_val(pte) | RANDOM_ORVALUE);
>>> @@ -1049,7 +1050,7 @@ static int __init debug_vm_pgtable(void)
>>>  
>>>  	ptl = pte_lockptr(mm, pmdp);
>>>  	spin_lock(ptl);
>>> -	pte_clear_tests(mm, ptep, vaddr);
>>> +	pte_clear_tests(mm, ptep, pte_aligned, vaddr, prot);
>>>  	pte_advanced_tests(mm, vma, ptep, pte_aligned, vaddr, prot);
>>>  	pte_unmap_unlock(ptep, ptl);
>>>  
>>> -- 
>> This patch causes a panic at boot for RISC-V defconfig. The rootfs is here if it is needed:
>> https://github.com/ClangBuiltLinux/boot-utils/blob/3b21a5b71451742866349ba4f18638c5a754e660/images/riscv/rootfs.cpio.zst
>>
>> $ make -skj"$(nproc)" ARCH=riscv CROSS_COMPILE=riscv64-linux- O=out/riscv distclean defconfig Image
>>
>> $ qemu-system-riscv64 -bios default -M virt -display none -initrd rootfs.cpio -kernel Image -m 512m -nodefaults -serial mon:stdio
>> ...
>>
>> OpenSBI v0.6
>>    ____                    _____ ____ _____
>>   / __ \                  / ____|  _ \_   _|
>>  | |  | |_ __   ___ _ __ | (___ | |_) || |
>>  | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
>>  | |__| | |_) |  __/ | | |____) | |_) || |_
>>   \____/| .__/ \___|_| |_|_____/|____/_____|
>>         | |
>>         |_|
>>
>> Platform Name          : QEMU Virt Machine
>> Platform HART Features : RV64ACDFIMSU
>> Platform Max HARTs     : 8
>> Current Hart           : 0
>> Firmware Base          : 0x80000000
>> Firmware Size          : 120 KB
>> Runtime SBI Version    : 0.2
>>
>> MIDELEG : 0x0000000000000222
>> MEDELEG : 0x000000000000b109
>> PMP0    : 0x0000000080000000-0x000000008001ffff (A)
>> PMP1    : 0x0000000000000000-0xffffffffffffffff (A,R,W,X)
>> [    0.000000] Linux version 5.9.0-rc4-next-20200910 (nathan@ubuntu-n2-xlarge-x86) (riscv64-linux-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35) #1 SMP Thu Sep 10 19:10:43 MST 2020
>> ...
>> [    0.294593] NET: Registered protocol family 17
>> [    0.295781] 9pnet: Installing 9P2000 support
>> [    0.296153] Key type dns_resolver registered
>> [    0.296694] debug_vm_pgtable: [debug_vm_pgtable         ]: Validating architecture page table helpers
>> [    0.297635] Unable to handle kernel paging request at virtual address 0a7fffe01dafefc8
>> [    0.298029] Oops [#1]
>> [    0.298153] Modules linked in:
>> [    0.298433] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4-next-20200910 #1
>> [    0.298792] epc: ffffffe000205afc ra : ffffffe0008be0aa sp : ffffffe01ae73d40
>> [    0.299078]  gp : ffffffe0010b9b48 tp : ffffffe01ae68000 t0 : ffffffe008152000
>> [    0.299362]  t1 : 0000000000000000 t2 : 0000000000000000 s0 : ffffffe01ae73d60
>> [    0.299648]  s1 : bffffffffffffffb a0 : 0a7fffe01dafefc8 a1 : bffffffffffffffb
>> [    0.299948]  a2 : ffffffe0010a2698 a3 : 0000000000000001 a4 : 0000000000000003
>> [    0.300231]  a5 : 0000000000000800 a6 : fffffffff0000080 a7 : 000000001b642000
>> [    0.300521]  s2 : ffffffe0081517b8 s3 : ffffffe008150a80 s4 : ffffffe01af30000
>> [    0.300806]  s5 : ffffffe01f8ca9b8 s6 : ffffffe008150000 s7 : ffffffe0010bb100
>> [    0.301161]  s8 : ffffffe0010bb108 s9 : 0000000000080202 s10: ffffffe0010bb928
>> [    0.301481]  s11: 000000002008085b t3 : 0000000000000000 t4 : 0000000000000000
>> [    0.301722]  t5 : 0000000000000000 t6 : ffffffe008150000
>> [    0.301947] status: 0000000000000120 badaddr: 0a7fffe01dafefc8 cause: 000000000000000f
>> [    0.302569] ---[ end trace 7ffb153d816164cf ]---
>> [    0.302797] note: swapper/0[1] exited with preempt_count 1
>> [    0.303101] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
>> [    0.303614] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
> 
> 
> I guess it is the combination of a valid pte and usage of
> RANDOM_ORVALUE. The below change get the kernel to boot. Can somebody
> faimilar with riscv pte format take a look at the RANDOM_ORVALUE?
> 
> modified   mm/debug_vm_pgtable.c
> @@ -548,7 +548,7 @@ static void __init pte_clear_tests(struct mm_struct *mm, pte_t *ptep,
>  	pte_t pte = pfn_pte(pfn, prot);
>  
>  	pr_debug("Validating PTE clear\n");
> -	pte = __pte(pte_val(pte) | RANDOM_ORVALUE);
> +//	pte = __pte(pte_val(pte) | RANDOM_ORVALUE);
>  	set_pte_at(mm, vaddr, ptep, pte);
>  	barrier();
>  	pte_clear(mm, vaddr, ptep);

Do we have a fix for this problem ? Otherwise we just risk going into
the next release with this regression on riscv platforms.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux