Re: [PATCH] ARM: sparsemem: Enable CONFIG_HOLES_IN_ZONE config option for SparseMem and HAS_HOLES_MEMORYMODEL for linux-3.0.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mel,

Please find my comments inline to the email below.

2 general questions:
i)    If an email chain such as this leads to another kernel patch for
the same problem, do I need to
      create a new email chain for that ?
ii)  Sorry about my formatting problems. However, text such as
backtraces and logs tend to wrap
      irrespective of whatever gmail settings/browser I try. Any
pointers here ?

Thanks,
Kautuk.

On Thu, Aug 4, 2011 at 3:39 PM, Mel Gorman <mgorman@xxxxxxx> wrote:
> On Thu, Aug 04, 2011 at 03:06:39PM +0530, Kautuk Consul wrote:
>> Hi Mel,
>>
>> My ARM system has 2 memory banks which have the following 2 PFN ranges:
>> 60000-62000 and 70000-7ce00.
>>
>> My SECTION_SIZE_BITS is #defined to 23.
>>
>
> So bank 0 is 4 sections and bank 1 is 26 sections with the last section
> incomplete.
>
>> I am altering the ranges via the following kind of pseudo-code in the
>> arch/arm/mach-*/mach-*.c file:
>> meminfo->bank[0].size -= (1 << 20)
>> meminfo->bank[1].size -= (1 << 20)
>>
>
> Why are you taking 1M off each bank? I could understand aligning the
> banks to a section size at least.

The reason I am doing this is that one of our embedded boards actually
has this problem, due
to which we see this kernel crash. I am merely reproducing this
problem by performing this step.

>
> That said, there is an assumption that pages within a MAX_ORDER-aligned
> block. If you are taking 1M off the end of bank 0, it is no longer
> MAX_ORDER aligned. This is the assumption move_freepages_block()
> is falling foul of. The problem can be avoided by ensuring that memmap
> is valid within MAX_ORDER-aligned ranges.
>
>> After altering the size of both memory banks, the PFN ranges now
>> visible to the kernel are:
>> 60000-61f00 and 70000-7cd00.
>>
>> There is only one node and one ZONE_NORMAL zone on the system and this
>> zone accounts for both memory banks as CONFIG_SPARSEMEM
>> is enabled in the kernel.
>>
>
> Ok.
>
>> I put some printks in the move_freeblockpages() function, compiled the
>> kernel and then ran the following commands:
>> ifconfig eth0 107.109.39.102 up
>> mount /dev/sda1 /mnt   # Mounted the USB pen drive
>> mount -t nfs -o nolock 107.109.39.103:/home/kautuk nfsmnt   # NFS
>> mounted an NFS share
>> cp test_huge_file nfsmnt/
>>
>> I got the following output:
>> #> cp test_huge nfsmnt/
>> ------------------------------------------------------------move_freepages_block_start----------------------------------------
>> kc: The page=c068a000 start_pfn=7c400 start_page=c0686000
>> end_page=c068dfe0 end_pfn=7c7ff
>> page_zone(start_page)=c048107c page_zone(end_page)=c048107c
>> page_zonenum(end_page) = 0
>> ------------------------------------------------------------move_freepages_block_end----------------------------------------
>> ------------------------------------------------------------move_freepages_block_start----------------------------------------
>> kc: The page=c0652000 start_pfn=7a800 start_page=c064e000
>> end_page=c0655fe0 end_pfn=7abff
>> page_zone(start_page)=c048107c page_zone(end_page)=c048107c
>> page_zonenum(end_page) = 0
>> ------------------------------------------------------------move_freepages_block_end----------------------------------------
>> ------------------------------------------------------------move_freepages_block_start----------------------------------------
>> kc: The page=c065a000 start_pfn=7ac00 start_page=c0656000
>> end_page=c065dfe0 end_pfn=7afff
>> page_zone(start_page)=c048107c page_zone(end_page)=c048107c
>> page_zonenum(end_page) = 0
>> ------------------------------------------------------------move_freepages_block_end----------------------------------------
>> ------------------------------------------------------------move_freepages_block_start----------------------------------------
>> kc: The page=c0695000 start_pfn=7c800 start_page=c068e000
>> end_page=c0695fe0 end_pfn=7cbff
>> page_zone(start_page)=c048107c page_zone(end_page)=c048107c
>> page_zonenum(end_page) = 0
>> ------------------------------------------------------------move_freepages_block_end----------------------------------------
>> ------------------------------------------------------------move_freepages_block_start----------------------------------------
>> kc: The page=c04f7c00 start_pfn=61c00 start_page=c04f6000
>> end_page=c04fdfe0 end_pfn=61fff
>> page_zone(start_page)=c048107c page_zone(end_page)=c0481358
>> page_zonenum(end_page) = 1
>> ------------------------------------------------------------move_freepages_block_end----------------------------------------
>> kernel BUG at mm/page_alloc.c:849!
>> Unable to handle kernel NULL pointer dereference at virtual address 00000000
>> pgd = ce9fc000
>> [00000000] *pgd=7ca5a031, *pte=00000000, *ppte=00000000
>>
>> As per the last line, we can clearly see that the
>> page_zone(start_page)=c048107c and page_zone(end_page)=c0481358,
>> which are not equal to each other.
>> Since they do not match, the code in move_freepages() bugchecks
>> because of the following BUG_ON() check:
>> page_zone(start_page) != page_zone(end_page)
>
>> The reason for this that the page_zonenum(end_page) is equal to 1 and
>> this is different from the page_zonenum(start_page) which is 0.
>>
>
> Because the MAX_ORDER alignment is gone.
>
>> On checking the code within page_zonenum(), I see that this code tries
>> to retrieve the zone number from the end_page->flags.
>>
>
> Yes. In the majority of cases a pages node and zone is stored in the
> page->flags.
>
>> The reason why we cannot expect the 0x61fff end_page->flags to contain
>> a valid zone number is:
>> memmap_init_zone() initializes the zone number of all pages for a zone
>> via the set_page_links() inline function.
>> For the end_page (whose PFN is 0x61fff), set_page_links() cannot be
>> possibly called, as the zones are simply not aware of of PFNs above
>> 0x61f00 and below 0x70000.
>>
>
> Can you ensure that the ranges passed into free_area_init_node()
> are MAX_ORDER aligned as this would initialise the struct pages. You
> may have already seen that care is taken when freeing memmap that it
> is aligned to MAX_ORDER in free_unused_memmap() in ARM.
>

Will this work ? My doubt arises from the fact that there is only one
zone on the entire
system which contains both memory banks.
The crash arises at the PFN 0x61fff, which will not be covered by such
a check, as this function
will try to act on the entire zone, which is the PFN range:
60000-7cd00, including the holes within as
all of this RAM falls into the same node and zone.
( Please correct me if I am wrong about this. )

I tried aligning the end parameter in the memory_present() function
which is called separately
for each memory bank.
I tried the following change in memory_present() as well as
mminit_validate_memodel_limits():
end &= ~(pageblock_nr_pages-1);
But, in this case, the board simply does not boot up. I think that
will then require some change in the
arch/arm code which I think would be an arch-specific solution to a
possibly generic problem.

>> The (end >= zone->zone_start_pfn + zone->spanned_pages) in
>> move_freepages_block() does not stop this crash from happening as both
>> our memory banks are in the same zone and the empty space within them
>> is accomodated into this zone via the CONFIG_SPARSEMEM
>> config option.
>>
>> When we enable CONFIG_HOLES_IN_ZONE we survive this BUG_ON as well as
>> any other BUG_ONs in the loop in move_freepages() as then the
>> pfn_valid_within()/pfn_valid() function takes care of this
>> functionality, especially in the case where the newly introduced
>> CONFIG_HAVE_ARCH_PFN_VALID is
>> enabled.
>>
>
> This is an expensive option in terms of performance. If Russell
> wants to pick it up, I won't object but I would strongly suggest that
> you solve this problem by ensuring that memmap is initialised on a
> MAX_ORDER-aligned boundaries as it'll perform better.
>

I couldn't really locate a method in the kernel wherein we can
validate a pageblock(1024 pages for my
platform) with respect to the memory banks on that system.

How about this :
We implement an arch_is_valid_pageblock() function, controlled by a
new config option
CONFIG_ARCH_HAVE IS_VALID_PAGEBLOCK.
This arch function will simply check whether this pageblock is valid
or not, in terms of arch-specific
memory banks or by using the memblock APIs depending on CONFIG_HAVE_MEMBLOCK.
We can modify the memmap_init_zone() function so that an outer loop
works in measures of
pageblocks thus enabling us to avoid invalid pageblocks.
We then wouldn't need to go for the HOLES_IN_ZONE option as all PFN
ranges will be aligned to the
pageblock_nr_pages thus removing the possibility of this crash in
move_freepages().


> Thanks.
>
> --
> Mel Gorman
> SUSE Labs
>

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]