Re: [PATCH v3 0/4] Clean up hugetlb boot command line processing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> On Apr 17, 2020, at 2:50 PM, Mike Kravetz <mike.kravetz@xxxxxxxxxx> wrote:
> 
> Longpeng(Mike) reported a weird message from hugetlb command line processing
> and proposed a solution [1].  While the proposed patch does address the
> specific issue, there are other related issues in command line processing.
> As hugetlbfs evolved, updates to command line processing have been made to
> meet immediate needs and not necessarily in a coordinated manner.  The result
> is that some processing is done in arch specific code, some is done in arch
> independent code and coordination is problematic.  Semantics can vary between
> architectures.
> 
> The patch series does the following:
> - Define arch specific arch_hugetlb_valid_size routine used to validate
>  passed huge page sizes.
> - Move hugepagesz= command line parsing out of arch specific code and into
>  an arch independent routine.
> - Clean up command line processing to follow desired semantics and
>  document those semantics.
> 
> [1] https://lore.kernel.org/linux-mm/20200305033014.1152-1-longpeng2@xxxxxxxxxx
> 
> Mike Kravetz (4):
>  hugetlbfs: add arch_hugetlb_valid_size
>  hugetlbfs: move hugepagesz= parsing to arch independent code
>  hugetlbfs: remove hugetlb_add_hstate() warning for existing hstate
>  hugetlbfs: clean up command line processing

Reverted this series fixed many undefined behaviors on arm64 with the config,

https://raw.githubusercontent.com/cailca/linux-mm/master/arm64.config

[   54.172683][    T1] UBSAN: shift-out-of-bounds in ./include/linux/hugetlb.h:555:34
[   54.180411][    T1] shift exponent 4294967285 is too large for 64-bit type 'unsigned long'
[   54.188885][    T1] CPU: 130 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc2-next-20200420 #1
[   54.197284][    T1] Hardware name: HPE Apollo 70             /C01_APACHE_MB         , BIOS L50_5.13_1.11 06/18/2019
[   54.207888][    T1] Call trace:
[   54.211100][    T1]  dump_backtrace+0x0/0x224
[   54.215565][    T1]  show_stack+0x20/0x2c
[   54.219651][    T1]  dump_stack+0xfc/0x184
[   54.223829][    T1]  __ubsan_handle_shift_out_of_bounds+0x304/0x344
[   54.230204][    T1]  hugetlb_add_hstate+0x3ec/0x414
huge_page_size at include/linux/hugetlb.h:555
(inlined by) hugetlb_add_hstate at mm/hugetlb.c:3301
[   54.235191][    T1]  hugetlbpage_init+0x14/0x30
[   54.239824][    T1]  do_one_initcall+0x6c/0x144
[   54.244446][    T1]  do_initcall_level+0x158/0x1c4
[   54.249336][    T1]  do_initcalls+0x68/0xb0
[   54.253597][    T1]  do_basic_setup+0x28/0x30
[   54.258049][    T1]  kernel_init_freeable+0x19c/0x228
[   54.263188][    T1]  kernel_init+0x14/0x208
[   54.267473][    T1]  ret_from_fork+0x10/0x18


[   55.534338][    T1] UBSAN: shift-out-of-bounds in ./include/linux/hugetlb.h:555:34
[   55.542064][    T1] shift exponent 4294967285 is too large for 64-bit type 'unsigned long'
[   55.550555][    T1] CPU: 129 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc2-next-20200420 #1
[   55.558992][    T1] Hardware name: HPE Apollo 70             /C01_APACHE_MB         , BIOS L50_5.13_1.11 06/18/2019
[   55.569659][    T1] Call trace:
[   55.572898][    T1]  dump_backtrace+0x0/0x224
[   55.577335][    T1]  show_stack+0x20/0x2c
[   55.581442][    T1]  dump_stack+0xfc/0x184
[   55.585621][    T1]  __ubsan_handle_shift_out_of_bounds+0x304/0x344
[   55.592031][    T1]  __hugetlb_cgroup_file_dfl_init+0x37c/0x384
[   55.598062][    T1]  hugetlb_cgroup_file_init+0x9c/0xd8
[   55.603399][    T1]  hugetlb_init+0x248/0x448
[   55.607840][    T1]  do_one_initcall+0x6c/0x144
[   55.612493][    T1]  do_initcall_level+0x158/0x1c4
[   55.617404][    T1]  do_initcalls+0x68/0xb0
[   55.621664][    T1]  do_basic_setup+0x28/0x30
[   55.626107][    T1]  kernel_init_freeable+0x19c/0x228
[   55.631253][    T1]  kernel_init+0x14/0x208
[   55.635519][    T1]  ret_from_fork+0x10/0x18

[  153.283648][    T1] ================================================================================
[  153.293078][    T1] UBSAN: shift-out-of-bounds in ./include/linux/hugetlb.h:555:34
[  153.300841][    T1] shift exponent 4294967285 is too large for 64-bit type 'unsigned long'
[  153.309185][    T1] CPU: 161 PID: 1 Comm: swapper/0 Tainted: G             L    5.7.0-rc2-next-20200420 #1
[  153.318879][    T1] Hardware name: HPE Apollo 70             /C01_APACHE_MB         , BIOS L50_5.13_1.11 06/18/2019
[  153.329352][    T1] Call trace:
[  153.332545][    T1]  dump_backtrace+0x0/0x224
[  153.336945][    T1]  show_stack+0x20/0x2c
[  153.341000][    T1]  dump_stack+0xfc/0x184
[  153.345149][    T1]  __ubsan_handle_shift_out_of_bounds+0x304/0x344
[  153.351465][    T1]  hugetlbfs_fill_super+0x424/0x43c
[  153.356560][    T1]  vfs_get_super+0xcc/0x170
[  153.360959][    T1]  get_tree_nodev+0x28/0x34
[  153.365358][    T1]  hugetlbfs_get_tree+0xfc/0x128
[  153.370193][    T1]  vfs_get_tree+0x54/0x158
[  153.374513][    T1]  fc_mount+0x1c/0x5c
[  153.378399][    T1]  mount_one_hugetlbfs+0x54/0xc8
[  153.383233][    T1]  init_hugetlbfs_fs+0x18c/0x268
[  153.388068][    T1]  do_one_initcall+0x6c/0x144
[  153.392647][    T1]  do_initcall_level+0x158/0x1c4
[  153.397480][    T1]  do_initcalls+0x68/0xb0
[  153.401706][    T1]  do_basic_setup+0x28/0x30
[  153.406105][    T1]  kernel_init_freeable+0x19c/0x228
[  153.411208][    T1]  kernel_init+0x14/0x208
[  153.415436][    T1]  ret_from_fork+0x10/0x18


[  194.312926][ T1828] UBSAN: shift-out-of-bounds in ./include/linux/hugetlb.h:584:11
[  194.320664][ T1828] shift exponent 4294967285 is too large for 32-bit type 'int'
[  194.328103][ T1828] CPU: 194 PID: 1828 Comm: systemd-journal Tainted: G             L    5.7.0-rc2-next-20200420 #1
[  194.338558][ T1828] Hardware name: HPE Apollo 70             /C01_APACHE_MB         , BIOS L50_5.13_1.11 06/18/2019
[  194.349010][ T1828] Call trace:
[  194.352183][ T1828]  dump_backtrace+0x0/0x224
[  194.356560][ T1828]  show_stack+0x20/0x2c
[  194.360595][ T1828]  dump_stack+0xfc/0x184
[  194.364724][ T1828]  __ubsan_handle_shift_out_of_bounds+0x304/0x344
[  194.371020][ T1828]  hugetlb_total_pages+0x100/0x128
[  194.376017][ T1828]  vm_commit_limit+0x54/0xb0
[  194.380484][ T1828]  meminfo_proc_show+0x8f4/0xc4c
[  194.385297][ T1828]  seq_read+0x380/0x930
[  194.389353][ T1828]  pde_read+0x5c/0x78
[  194.393232][ T1828]  proc_reg_read+0x74/0xc0
[  194.397528][ T1828]  __vfs_read+0x84/0x1d0
[  194.401646][ T1828]  vfs_read+0xec/0x124
[  194.405588][ T1828]  ksys_read+0xb0/0x120
[  194.409643][ T1828]  __arm64_sys_read+0x54/0x88
[  194.414195][ T1828]  do_el0_svc+0x128/0x1dc
[  194.418405][ T1828]  el0_sync_handler+0x150/0x250
[  194.423157][ T1828]  el0_sync+0x164/0x180
[  194.427425][ T1828] ================================================================================
[  194.436930][ T1828] ================================================================================
[  194.446355][ T1828] UBSAN: shift-out-of-bounds in mm/hugetlb.c:3564:23
[  194.453190][ T1828] shift exponent 4294967285 is too large for 64-bit type 'unsigned long'
[  194.461752][ T1828] CPU: 194 PID: 1828 Comm: systemd-journal Tainted: G             L    5.7.0-rc2-next-20200420 #1
[  194.472245][ T1828] Hardware name: HPE Apollo 70             /C01_APACHE_MB         , BIOS L50_5.13_1.11 06/18/2019
[  194.482720][ T1828] Call trace:
[  194.485909][ T1828]  dump_backtrace+0x0/0x224
[  194.490312][ T1828]  show_stack+0x20/0x2c
[  194.494368][ T1828]  dump_stack+0xfc/0x184
[  194.498513][ T1828]  __ubsan_handle_shift_out_of_bounds+0x304/0x344
[  194.504828][ T1828]  hugetlb_report_meminfo+0x25c/0x2ac
[  194.510103][ T1828]  meminfo_proc_show+0xc08/0xc4c
[  194.514938][ T1828]  seq_read+0x380/0x930
[  194.518993][ T1828]  pde_read+0x5c/0x78
[  194.522874][ T1828]  proc_reg_read+0x74/0xc0
[  194.527190][ T1828]  __vfs_read+0x84/0x1d0
[  194.531335][ T1828]  vfs_read+0xec/0x124
[  194.535304][ T1828]  ksys_read+0xb0/0x120
[  194.539371][ T1828]  __arm64_sys_read+0x54/0x88
[  194.543958][ T1828]  do_el0_svc+0x128/0x1dc
[  194.548187][ T1828]  el0_sync_handler+0x150/0x250
[  194.552936][ T1828]  el0_sync+0x164/0x180

> 
> .../admin-guide/kernel-parameters.txt         |  40 ++--
> Documentation/admin-guide/mm/hugetlbpage.rst  |  35 ++++
> arch/arm64/mm/hugetlbpage.c                   |  30 +--
> arch/powerpc/mm/hugetlbpage.c                 |  30 +--
> arch/riscv/mm/hugetlbpage.c                   |  24 +--
> arch/s390/mm/hugetlbpage.c                    |  24 +--
> arch/sparc/mm/init_64.c                       |  43 +---
> arch/x86/mm/hugetlbpage.c                     |  23 +--
> include/linux/hugetlb.h                       |   2 +-
> mm/hugetlb.c                                  | 190 +++++++++++++++---
> 10 files changed, 271 insertions(+), 170 deletions(-)
> 
> -- 
> 2.25.2
> 
> 






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux