Re: [RFC PATCH v5 4/8] mm: tlb: Pass struct mmu_gather to flush_pmd_tlb_range

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Peter,

On 2020/4/1 20:20, Peter Zijlstra wrote:
> On Wed, Apr 01, 2020 at 04:51:15PM +0800, Zhenyu Ye wrote:
>> On 2020/3/31 23:13, Peter Zijlstra wrote:
> 
>>> Instead of trying to retro-fit flush_*tlb_range() to take an mmu_gather
>>> parameter, please replace them out-right.
>>>
>>
>> I'm sorry that I'm not sure what "replace them out-right" means.  Do you
>> mean that I should define flush_*_tlb_range like this?
>>
>> #define flush_pmd_tlb_range(vma, addr, end)				\
>> 	do {								\
>> 		struct mmu_gather tlb;					\
>> 		tlb_gather_mmu(&tlb, (vma)->vm_mm, addr, end);		\
>> 		tlba.cleared_pmds = 1;					\
>> 		flush_tlb_range(&tlb, vma, addr, end);			\
>> 		tlb_finish_mmu(&tlb, addr, end);			\
>> 	} while (0)
>>
> 
> I was thinking to remove flush_*tlb_range() entirely (from generic
> code).
> 
> And specifically to not use them like the above; instead extend the
> mmu_gather API.
> 
> Specifically, if you wanted to express flush_pmd_tlb_range() in mmu
> gather, you'd write it like:
> 
> static inline void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long addr, unsigned long end)
> {
> 	struct mmu_gather tlb;
> 
> 	tlb_gather_mmu(&tlb, vma->vm_mm, addr, end);
> 	tlb_start_vma(&tlb, vma);
> 	tlb.cleared_pmds = 1;
> 	__tlb_adjust_range(addr, end - addr);
> 	tlb_end_vma(&tlb, vma);
> 	tlb_finish_mmu(&tlb, addr, end);
> }
> 
> Except of course, that the code between start_vma and end_vma is not a
> proper mmu_gather API.
> 
> So maybe add:
> 
>   tlb_flush_{pte,pmd,pud,p4d}_range()
> 
> Then we can write:
> 
> static inline void flush_XXX_tlb_range(struct vm_area_struct *vma, unsigned long addr, unsigned long end)
> {
> 	struct mmu_gather tlb;
> 
> 	tlb_gather_mmu(&tlb, vma->vm_mm, addr, end);
> 	tlb_start_vma(&tlb, vma);
> 	tlb_flush_XXX_range(&tlb, addr, end - addr);
> 	tlb_end_vma(&tlb, vma);
> 	tlb_finish_mmu(&tlb, addr, end);
> }
> 
> But when I look at the output of:
> 
>   git grep flush_.*tlb_range -- :^arch/
> 
> I doubt it makes sense to provide wrappers like the above.
> 

Thanks for your detailed explanation.  I notice that you used
`tlb_end_vma` replace `flush_tlb_range`, which will call `tlb_flush`,
then finally call `flush_tlb_range` in generic code.  However, some
architectures define tlb_end_vma|tlb_flush|flush_tlb_range themselves,
so this may cause problems.

For example, in s390, it defines:

#define tlb_end_vma(tlb, vma)			do { } while (0)

And it doesn't define it's own flush_pmd_tlb_range().  So there will be
a mistake if we changed flush_pmd_tlb_range() using tlb_end_vma().

Is this really a problem or something I understand wrong ?



If true, I think there are three ways to solve this problem:

1. use `flush_tlb_range` rather than `tlb_end_vma` in flush_XXX_tlb_range;
   In this way, we still need retro-fit `flush_tlb_range` to take an mmu_gather
parameter.

2. use `tlb_flush` rather than `tlb_end_vma`.
   There is a constraint such like:

	#ifndef tlb_flush
	#if defined(tlb_start_vma) || defined(tlb_end_vma)
	#error Default tlb_flush() relies on default tlb_start_vma() and tlb_end_vma()
	#endif

   So all architectures that define tlb_{start|end}_vma have defined tlb_flush.
Also, we can add a constraint to flush_XXX_tlb_range such like:

	#ifndef flush_XXX_tlb_range
	#if defined(tlb_start_vma) || defined(tlb_end_vma)
	#error Default flush_XXX_tlb_range() relies on default tlb_start/end_vma()
	#endif

3. Define flush_XXX_tlb_range() architecture-self, and keep original define in
generic code, such as:

In arm64:
	#define flush_XXX_tlb_range flush_XXX_tlb_range

In generic:
	#ifndef flush_XXX_tlb_range
	#define flush_XXX_tlb_range flush_tlb_range


Which do you think is more appropriate?


> ( Also, we should probably remove the (addr, end) arguments from
> tlb_finish_mmu(), Will? )
> 

This can be changed quickly. If you want I can do this with a
separate patch.

> ---
> diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h
> index f391f6b500b4..be5452a8efaa 100644
> --- a/include/asm-generic/tlb.h
> +++ b/include/asm-generic/tlb.h
> @@ -511,6 +511,34 @@ static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vm
>  }
>  #endif
>  
> +static inline void tlb_flush_pte_range(struct mmu_gather *tlb,
> +				       unsigned long address, unsigned long size)
> +{
> +	__tlb_adjust_range(tlb, address, size);
> +	tlb->cleared_ptes = 1;
> +}
> +
> +static inline void tlb_flush_pmd_range(struct mmu_gather *tlb,
> +				       unsigned long address, unsigned long size)
> +{
> +	__tlb_adjust_range(tlb, address, size);
> +	tlb->cleared_pmds = 1;
> +}
> +
> +static inline void tlb_flush_pud_range(struct mmu_gather *tlb,
> +				       unsigned long address, unsigned long size)
> +{
> +	__tlb_adjust_range(tlb, address, size);
> +	tlb->cleared_puds = 1;
> +}
> +
> +static inline void tlb_flush_p4d_range(struct mmu_gather *tlb,
> +				       unsigned long address, unsigned long size)
> +{
> +	__tlb_adjust_range(tlb, address, size);
> +	tlb->cleared_p4ds = 1;
> +}
> +

By the way, I think the name of tlb_set_XXX_range() is more suitable, because
we don't do actual flush there.

>  #ifndef __tlb_remove_tlb_entry
>  #define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
>  #endif
> @@ -524,8 +552,7 @@ static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vm
>   */
>  #define tlb_remove_tlb_entry(tlb, ptep, address)		\
>  	do {							\
> -		__tlb_adjust_range(tlb, address, PAGE_SIZE);	\
> -		tlb->cleared_ptes = 1;				\
> +		tlb_flush_pte_range(tlb, address, PAGE_SIZE);	\
>  		__tlb_remove_tlb_entry(tlb, ptep, address);	\
>  	} while (0)
>  
> @@ -550,8 +577,7 @@ static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vm
>  
>  #define tlb_remove_pmd_tlb_entry(tlb, pmdp, address)			\
>  	do {								\
> -		__tlb_adjust_range(tlb, address, HPAGE_PMD_SIZE);	\
> -		tlb->cleared_pmds = 1;					\
> +		tlb_flush_pmd_range(tlb, address, HPAGE_PMD_SIZE);	\
>  		__tlb_remove_pmd_tlb_entry(tlb, pmdp, address);		\
>  	} while (0)
>  
> @@ -565,8 +591,7 @@ static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vm
>  
>  #define tlb_remove_pud_tlb_entry(tlb, pudp, address)			\
>  	do {								\
> -		__tlb_adjust_range(tlb, address, HPAGE_PUD_SIZE);	\
> -		tlb->cleared_puds = 1;					\
> +		tlb_flush_pud_range(tlb, address, HPAGE_PUD_SIZE);	\
>  		__tlb_remove_pud_tlb_entry(tlb, pudp, address);		\
>  	} while (0)
>  
> 
> .
> 





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux