Re: [PATCH v3 18/27] powerpc/powernv/pmem: Add controller dump IOCTLs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2020-03-04 at 17:53 +1100, Andrew Donnellan wrote:
> On 21/2/20 2:27 pm, Alastair D'Silva wrote:
> > +static int ioctl_controller_dump_data(struct ocxlpmem *ocxlpmem,
> > +		struct ioctl_ocxl_pmem_controller_dump_data __user
> > *uarg)
> > +{
> > +	struct ioctl_ocxl_pmem_controller_dump_data args;
> > +	u16 i;
> > +	u64 val;
> > +	int rc;
> > +
> > +	if (copy_from_user(&args, uarg, sizeof(args)))
> > +		return -EFAULT;
> > +
> > +	if (args.buf_size % 8)
> > +		return -EINVAL;
> > +
> > +	if (args.buf_size > ocxlpmem->admin_command.data_size)
> > +		return -EINVAL;
> > +
> > +	mutex_lock(&ocxlpmem->admin_command.lock);
> > +
> > +	rc = admin_command_request(ocxlpmem,
> > ADMIN_COMMAND_CONTROLLER_DUMP);
> > +	if (rc)
> > +		goto out;
> > +
> > +	val = ((u64)args.offset) << 32;
> > +	val |= args.buf_size;
> > +	rc = ocxl_global_mmio_write64(ocxlpmem->ocxl_afu,
> > +				      ocxlpmem-
> > >admin_command.request_offset + 0x08,
> > +				      OCXL_LITTLE_ENDIAN, val);
> > +	if (rc)
> > +		goto out;
> > +
> > +	rc = admin_command_execute(ocxlpmem);
> > +	if (rc)
> > +		goto out;
> > +
> > +	rc = admin_command_complete_timeout(ocxlpmem,
> > +					    ADMIN_COMMAND_CONTROLLER_DU
> > MP);
> > +	if (rc < 0) {
> > +		dev_warn(&ocxlpmem->dev, "Controller dump timed
> > out\n");
> > +		goto out;
> > +	}
> > +
> > +	rc = admin_response(ocxlpmem);
> > +	if (rc < 0)
> > +		goto out;
> > +	if (rc != STATUS_SUCCESS) {
> > +		warn_status(ocxlpmem,
> > +			    "Unexpected status from retrieve error
> > log",
> 
> Controller dump
> 

Ok

> > +			    rc);
> > +		goto out;
> > +	}
> > +
> > +	for (i = 0; i < args.buf_size; i += 8) {
> > +		u64 val;
> > +
> > +		rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
> > +					     ocxlpmem-
> > >admin_command.data_offset + i,
> > +					     OCXL_HOST_ENDIAN, &val);
> 
> Is a controller dump something where we want to do endian swapping?
> 

No, we just have raw binary data that we want to pass through.
OCXL_HOST_ENDIAN does no swapping.

> Any reason we're not doing the usual check of the data identifier, 
> additional data length etc?
> 

I'll add that

> > +		if (rc)
> > +			goto out;
> > +
> > +		if (copy_to_user(&args.buf[i], &val, sizeof(u64))) {
> > +			rc = -EFAULT;
> > +			goto out;
> > +		}
> > +	}
> > +
> > +	if (copy_to_user(uarg, &args, sizeof(args))) {
> > +		rc = -EFAULT;
> > +		goto out;
> > +	}
> > +
> > +	rc = admin_response_handled(ocxlpmem);
> > +	if (rc)
> > +		goto out;
> > +
> > +out:
> > +	mutex_unlock(&ocxlpmem->admin_command.lock);
> > +	return rc;
> > +}
> > +
> > +int request_controller_dump(struct ocxlpmem *ocxlpmem)
> > +{
> > +	int rc;
> > +	u64 busy = 1;
> > +
> > +	rc = ocxl_global_mmio_set64(ocxlpmem->ocxl_afu,
> > GLOBAL_MMIO_CHIC,
> > +				    OCXL_LITTLE_ENDIAN,
> > +				    GLOBAL_MMIO_CHI_CDA);
> 
> This return code is ignored
> 
> > +
> > +
> > +	rc = ocxl_global_mmio_set64(ocxlpmem->ocxl_afu,
> > GLOBAL_MMIO_HCI,
> > +				    OCXL_LITTLE_ENDIAN,
> > +				    GLOBAL_MMIO_HCI_CONTROLLER_DUMP);
> > +	if (rc)
> > +		return rc;
> > +
> > +	while (busy) {
> > +		rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
> > +					     GLOBAL_MMIO_HCI,
> > +					     OCXL_LITTLE_ENDIAN,
> > &busy);
> > +		if (rc)
> > +			return rc;
> > +
> > +		busy &= GLOBAL_MMIO_HCI_CONTROLLER_DUMP;
> > +		cond_resched();
> > +	}
> > +
> > +	return 0;
> > +}
> 
> 
-- 
Alastair D'Silva
Open Source Developer
Linux Technology Centre, IBM Australia
mob: 0423 762 819





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux